Huge Competition Clutch Sale, Starting @ 279.99!
 

As always, shipping is free in the continental USA!

http://www.competitionclutch.com/ima...tdetail_47.jpg

Stage 2 $279.99

http://www.maperformance.com/store/p...6&cat=0&page=1

This assembly provides approximately 80% increase in torque capacity and is properly suited for aggressive street use and moderate track use. The Carbon Kevlar material with its alloy backing matched to a performance pressure plate will provide smooth engagement and extended life.

The 2100 Series kit includes a performance pressure plate, a high torque sprung disc with antiburst steel backed Carbon Kevlar facings, all applicable bearings, and the appropriate alignment tool.

*Don't let the part numbers fool you, this Stage 2 kit includes a 2700 lb pressure plate! It will hold as much if not more power than an ACT 2600!

http://www.competitionclutch.com/ima...tdetail_39.jpg

Stage 3 $369.99

http://www.maperformance.com/store/p...cat=260&page=1

This segmented Carbon Kevlar material with a performance pressure plate will provide the ultimate in street and strip combinations. This assembly is suited for 150% increase in torque capacity. Provides quick but smooth engagement and extended life. 500 mile break-in REQUIRED with this set-up.

The 2300 Series kit includes a performance pressure plate, a high torque sprung disc with segmented Carbon Kevlar facings, all applicable bearings, and the appropriate alignment tool.

http://www.competitionclutch.com/ima...tdetail_44.jpg

Forged Lightweight Steel Flywheel $224.99

http://www.maperformance.com/store/p...cat=261&page=1

The ST flywheel is recommended for naturally aspiriated and/or street driven applications. This flywheel will work with ALL performance and stock clutch assemblies.
Qualities of the CCI Lightweight Steel Flywheel:
Preserves low end torque and drive ability
One piece ring gear for high durability
Weight varies from 11 lbs. to 14 lbs. depending on application
Well suited for Stage 1 and Stage 2 clutch kit applications
Stamped with 4140 plate with 2000 ton pressure at 1260 degrees
CNC machined and balanced to O.E. specifications

Reduced Mass = Increased Accleration

Meets and exceeds SFI 1.5

Re: Huge Competition Clutch Sale, Starting @ 279.99!
 

S2000 guys are having great success with Comp clutches.

Re: Huge Competition Clutch Sale, Starting @ 279.99!
 

Nice! I guess you know where to look when it comes time to upgrade ;)

Chris

Re: Huge Competition Clutch Sale, Starting @ 279.99!
 

That first one looks interesting. I currently have an X-Clutch, and I believe it also uses a 2700lb Pressure Plate, with a full faced organic disc. Looks like that first one would be similar to it.