Another year another upgrade, we are moving again
 

Yeah that makes it 3 times in 3 years.

In a never ending mission to try to serve the community better we are upgrading our facility. The front runner is a 5000 square foot facility in Ramsey, MN. This facility will feature an enclosed dyno cell with 15,000cfm of air movement, an engine clean room, more work space (better layout), more additional tooling, a showfloor area, and more parts in-stock. This move will allow us to start up on the E-commerce. Next season expect us to have ATLEAST 1 built 4G63 instock.

It gets even better. Projected move date is December 1st, 2006, or January 1st, 2007. There are still a few details to be worked out, final announcement to be made within 2 weeks.

Finally, due to this move we are able to take on a larger work load. This will allow us to drop our shop rate to $80/hr effective the move date.

Thank you all for your attention to this matter, your continued support is greatly appreciated.

Re: Another year another upgrade, we are moving again
 

Excuse my ignorance, but where exactly is Ramsey?

Re: Another year another upgrade, we are moving again
 

Awesome to hear, guys! Can wait to see the new shop.
Just north of Anoka and Champlin.

Re: Another year another upgrade, we are moving again
 

Congrats.

Re: Another year another upgrade, we are moving again
 

awsome back up here closer to me.

Re: Another year another upgrade, we are moving again
 

Noooo! Driving that far sucks ass! Keep it closer to the 694/494 loop! Congrats on growing, but closer is better! :)

Re: Another year another upgrade, we are moving again
 

I second this motion.

Re: Another year another upgrade, we are moving again
 

I think constantly moving is kinda strange, but hey if it's better for you, then congrats. Ramsey is closer to me then MG. Will it be right off 10?

Re: Another year another upgrade, we are moving again
 

Its right off bunker and easily accessable from hwy 10.

Just couldn't help but closer to the Brownman!! ahh, yes.
Congrats on the move, hopefully the process goes smoothly for you.

Re: Another year another upgrade, we are moving again
 

Bunker, isnt that near where you were before then?

Re: Another year another upgrade, we are moving again
 

Same building, I'm guessing.

Re: Another year another upgrade, we are moving again
 

It is a few blocks away from our old facility. We have one other option that we are looking at that is in Plymouth. The problem with the Plymouth location is we went and "found" it and it is somewhat of a pita to find. We have an appointment tuesday to see what it looks like inside, but the renovation would probably be very costly.

We are just trying to find a location that will allow us to dyno tune during the day and allow us to better lay out our shop space. Good shop space is hard to find, tenants that don't complain about noise is even harder. We made a mistake with this landlord regarding noise, the next lease we are in control.
Moving every year is not the goal and is honestly a huge pain! Fortunally we are keeping the same phone numbers so it will not be difficult to track us down.
We will probably be throwing a moving party as well.
I'll have more details at the end of this week. We are just very excited to have the opportunity to obtain a better layout for the future. The move will allow us to schedule work more efficiently. For those that will have to drive further (assuming the Ramsey location is chosen, it is a 95% front runner) I appologize. The new "digs" will be well worth the drive, trust me :).

Re: Another year another upgrade, we are moving again
 

If you are getting hassled about noise it is a no brainer that you need to move. Cars at WOT with straight through exhaust arent exactly quiet and obviously that is a huge part in a days work at a performance shop with dyno tuning.

Good luck on finding a better location. Sounds like a smart thing to do to me.

What is Hitech's setup like? I heard they are moving? Is there current location worth a shit?

Re: Another year another upgrade, we are moving again
 

Deng you're getting harrassed about noise? That's crappy.

If you guys need help moving, you know my number.

Re: Another year another upgrade, we are moving again
 

Moving party, hell yes!!!
I will be able to lend a hand also, just remember the other hand of mine will be holding the Jag. :D

Re: Another year another upgrade, we are moving again
 

If business wasn't going well, you wouldn't be moving, so congrats. Yeah, it's a hike up to ramsey, but do what you must. (p-town would be slick, I must say).

Maybe in a year I'll want a built 4g63. :D :D

Re: Another year another upgrade, we are moving again
 

It isn't that far from me, but I am sure you will lose some customers being up in Ramsey. There are several nice sites down here in Fridley, right off 694. One is on Hwy 65, just south of Menards. It has been vacant for quite some time. There is also several industrial complexes that have some vacancy around here. I know noise would not be an issue there. Actually the Carquest just moved out on University too, and that building is empty. I would do some more looking. There are a ton of places out there.

Re: Another year another upgrade, we are moving again
 

Sucks that its going to be a long drive for the majority of customers, but congrats on being able to expand again! Business must be good, keep it up :)

Re: Another year another upgrade, we are moving again
 

I'm not sure about my math skills, but three years seemed a bit long to me. I just looked at your move in dates from your first LSE posts(first Ramsey shop).. May 2005. I had to check, I thought I was losing my mind..

Re: Another year another upgrade, we are moving again
 

Well it's been 3 years from the start. Moved from our garages thus gathering all the equipment and tools into one location in Ramsey. Then with the addition of the Dyno, came the move to Maple Grove. So to better serve you the move to the new location is a plus. Yes moving is hell but can't stay here.