MitsuStyle

MitsuStyle (http://www.mitsustyle.com/forums/index.php)
-   Turbo / Engine / Drivetrain (http://www.mitsustyle.com/forums/forumdisplay.php?f=91)
-   -   valve cover cap gasket (http://www.mitsustyle.com/forums/showthread.php?t=13409)

beachbum_jon 10-26-2006 09:48 PM

valve cover cap gasket
 
does anyone on here know if you can use that engine seal make a gasket kit to make a gasket for the oil cap?

Kracka 10-26-2006 10:42 PM

Re: valve cover cap gasket
 
....or spend $.79 to get a new oil cap gasket from Mitsu.

beachbum_jon 10-28-2006 12:02 PM

Re: valve cover cap gasket
 
oh well i had some of this seal maker laying around, just wondering if it would workor not

Goat Blower 10-28-2006 01:25 PM

Re: valve cover cap gasket
 
Get the gasket. RTV doesn't make a very good internal lubricant.

xveganxcowboyx 11-01-2006 07:35 AM

Re: valve cover cap gasket
 
I tried a cheap oil cap from autozone which didn't work. I was able to yank the gasket and cut it to size though. Works fine.

Kracka 11-01-2006 07:40 AM

Re: valve cover cap gasket
 
A brand new Mitsu oil cap with gasket is like $7-9.

tpunx99GSX 11-01-2006 06:01 PM

Re: valve cover cap gasket
 
Stupid things like this where one uses ghetto means to replace a 79cent part usually lead to another thread... "My car wont start, and its got all this gunk in the valves."

xveganxcowboyx 11-01-2006 10:41 PM

Re: valve cover cap gasket
 
I was passing an auto parts store, it had been leaking. I figured the $4 was worth a shot. I buy right when possible, but I don't think a donut of rubber that fits just fine is going to cause me any major head aches.

*edit* Besides, I like my Hyundai oil cap :)


All times are GMT -5. The time now is 03:38 AM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.