MAFT AUX knob
 

1992 Eagle Talon Tsi AWD 5spd
MAFT v2.02 (3" GM MAF)
Hey, can someone tell me what number the Auxillary knob should be set at for stock 450cc injectors? ( I don't have the sheet, and I can't find it online).

My friend told me 0 is 430cc, 1 is 440cc, and 2 is 450cc. But I think thats BS. Shouldn't it be at zero? AKA no correction?

Re: MAFT AUX knob
 

zero is stock, your friend is dumb.

Re: MAFT AUX knob
 

Your friend is quite dumb, zero for stock injectors.

Re: MAFT AUX knob
 

THANKS! Cause I've been driving on 2!

Re: MAFT AUX knob
 

Eh, if my engine blows up oh well. But I'm changing it right now.

Re: MAFT AUX knob
 

Ask your friend if he could reference what Mitsu vehicles had 430cc and 440cc injectors.

Re: MAFT AUX knob
 

Im not dumb mother fuckers... your dumb kevin! I told you BASE at 2 and AUX at 0! I read that straight out of the install instructions!!! http://www.fullthrottletech.com/atta...2&d=1103666303

Re: MAFT AUX knob
 

Well someones dumb either way. haha

Re: MAFT AUX knob
 

durrrrrrrrrrrrrrrrrrrr

Re: MAFT AUX knob
 

Aren't the autos 3xx cc injectors?

Re: MAFT AUX knob
 

HAHA thats what I thought too, I believe they are 390cc.

Re: MAFT AUX knob
 

oshit you are probably right. vfaq says 380-390 :(

Re: MAFT AUX knob
 

I decided you now owe us Applebees tonight.

Re: MAFT AUX knob
 

And 0 in not NO CORRECTION, on a 2g No correction aux is on 4.
Here is the chart off the instrucions...(the injector size is saposed to be under each aux number)

1G DSM AUX = 0 AUX = 1 AUX = 2 AUX = 3
2G DSM AUX = 4 AUX = 5 AUX = 6 AUX = 7
BASE = 0 430 580 730 880
BASE = 1 440 590 740 890
BASE = 2 450 600 750 900
BASE = 3 460 610 760 910
BASE = 4 470 620 770 920
BASE = 5 480 630 780 930
BASE = 6 490 640 790 940
BASE = 7 500 650 800 950
BASE = 8 510 660 810 960
BASE = 9 520 670 820 970
BASE = A 530 680 830 980
BASE = B 540 690 840 990
BASE = C 550 700 850 1000
BASE = D 560 710 860 1010
BASE = E 570 720 870 1020
BASE = F 580 730 880 1030

Re: MAFT AUX knob
 

haha yeah, after i went out and looked at my maf i realized my aux was on 0, and that the base was on two. and it made sense that its all good.

Re: MAFT AUX knob
 

What a waste of a thread. ;)

Re: MAFT AUX knob
 

I learned something new haha! Not a total waste?

Re: MAFT AUX knob
 

Would of never knew it was you haha! But now I do haha just messing.