MitsuStyle - Wideband

MitsuStyle (http://www.mitsustyle.com/forums/index.php)

- DB Performance (http://www.mitsustyle.com/forums/forumdisplay.php?f=69)

- - Wideband (http://www.mitsustyle.com/forums/showthread.php?t=13167)

Enes	10-05-2006 11:03 AM

Wideband

http://dsmstyle.com/forums/sr_classi...hp?do=ad&id=91

can that be setup with DSMLink to log?

-E

Shane@DBPerformance

10-05-2006 11:25 AM

Re: Wideband

Should be able to with the proper voltage to A/F calibration in DSMLink. The gauge has 2 outputs on it. One is the usual 0-5 Volt analog output that you would run to an EMS system. The other is a serial output that can be wired to a DB9 plug and you can use a terminal program like HyperTerminal to see A/F output.

95talonracer

10-05-2006 01:39 PM

Re: Wideband

I have this wideband and I loke it alot. Alot of the guys that I know that have the innovative one or what ever it is said that they like mine alot more. The other one is too bright and cheap looking lights on it. I dont know if you (Enes) were wondering this as well but can this wideband also be a replacement with the seperate outputs for the 02 in our cars? Not trying to steel the thread but just trying to answer more questions about the AEM.

All times are GMT -5. The time now is 11:40 PM.