Blow off valve
 

I was wondering what you guys are using and your reviews! I did use searched already. I didn't get what I wanted. I'm in the market of buying one, and most people I talk to says to just buy any because they all work the same?! Reliability? etc... Thanks in advance!

Re: Blow off valve
 

They do not all work the same. Your planned usage can help determine which you need. A crushed 1G BOV can hold 22 psi so thats the most economical choice if you don't crank the boost up with race gas. My personal favorite aftermarket BOV is the HKS SSQV or whatever its called.

Re: Blow off valve
 

I started with the crushed 1g then my buddy gave me his HKS ssqbov and I liked em both. The only difference was the sound really. Then again I'm shootin about 15 psi soon to be 20.

Re: Blow off valve
 

You used it in your old setup? I was thinking the HKS also. I was told not to get Blitz brand haha just cause!

Re: Blow off valve
 

I had a crushed 1G and it worked fine for me.

Re: Blow off valve
 

I have a Greddy Type S BOV and I have had no problems and It looks nice and it sounds good too.

Re: Blow off valve
 

I have a Blitz DD :D. It's worked well for me so far, but I only have it on from time to time when I'm bored.

Re: Blow off valve
 

The only 2 bov's I'd ever run is an HKS SSQV or the tial 50mm. I have yet to hear a bad review on either of these two. type s's are ok, and work just fine, but I have heard seal issues with them from time to time-small tears. I personally run the tial, because it holds boost, at any psi. Works like a charm each time, every time. Plus, it sounds cool as hell, but not obnoxiously loud either.

-A. Swift

Re: Blow off valve
 

i've got a greddy type s bov and it works just great

Re: Blow off valve
 

I had a Greddy Type RS (40mm valve) vented. It worked very well, and looked nice (first thing people complimented if they saw my engine... ricers!) It sounded like a vented 1G BOV, not very high pitched like an HKS SSQV/Greddy Type S

Re: Blow off valve
 

If you have a small turbo (less than 20G) then the Tial sounds crappy and flutters alot.

Re: Blow off valve
 

There are different springs available for the Tial BOVs.

Re: Blow off valve
 

Anyone here had any personal experience with the turboxs rfl type h bov? I'm planning on getting one to replace my 1g bov that's on my 2g buschur uicp. I like the 1g bov and all but I guess it's just my thing where I want the bov to be heard loud. I know, sounds funny and ricer right?

Re: Blow off valve
 

Slowboy has that BOV. It sounds really nice inside the car last time I heard it. :D

Re: Blow off valve
 

I don't know if they still are, but the Turbo XS BOVs were mounted by set screws and often suffered from boost leaks with their poor mounting setup.

Re: Blow off valve
 

I use to use a crushed 1g in my 98 gsx. It worked very well. I got a greddy type-rs, it works very well, i have it at 18 psi right now and works fine, looks great under the hood and sounds nice. im sure if i ever get up to the gt35r turbo stage ill get a diff one tho. Like a tial or something. My .02

Re: Blow off valve
 

Has anyone ever herd of the Sard R2D2 Blow off Valve?
If so where could I find a sound clip?