MitsuStyle

MitsuStyle (http://www.mitsustyle.com/forums/index.php)
-   Turbo / Engine / Drivetrain (http://www.mitsustyle.com/forums/forumdisplay.php?f=91)
-   -   1G Coilovers. (http://www.mitsustyle.com/forums/showthread.php?t=12522)

sleepydsm 08-19-2006 09:46 PM

1G Coilovers.
 
I've got money to spend. Any one have experience with 1G coilovers? (JIC FLTA2, Tein SS, Ksport/D2). I'm looking at the Ksport/d2 mainly cause of price, but the Tein is only slightly more and may be better quality. Any input is greatly appreciated.
-Kevin

Kracka 08-20-2006 09:14 AM

Re: 1G Coilovers.
 
Stay away from JIC, they have known build quality and quality control issues. I'd actually take the Ksport coilovers over the Tein's; Tein's cheaper line of coilovers aren't too impressive and you're mainly paying for the name and the green paint.

94AWDTSi 08-20-2006 12:06 PM

Re: 1G Coilovers.
 
S2kracka Is ground control good? If not then I'll go with Ksport also, was saving for teins... thanks!

Kracka 08-20-2006 12:45 PM

Re: 1G Coilovers.
 
I had GroundControls and to be honest they are kinda junk. All they are is a coil spring on a threaded perch; you still need to purchase aftermarket shocks to use them. By the time you purchase the GC's and some nice AGX shocks you might as well just spend a bit more and get a real compete coilover setup.

For you 2G guys, Megan has a nice street-coilover kit for under $1000 so that is worth checking out.

Coilovers, a new rear antisway bar, and a front strut tower brace equal a great handling DSM (assuming you get it aligned and lowered properly). If you are truely hardcore, a set of poly bushings make quite a difference aswell, but they are a real PITA to install.

Hoffer00 08-20-2006 01:45 PM

Re: 1G Coilovers.
 
I have a 2gen but i have tokico gas shocks (high end) and skunk2 coilovers. In the end it cost just under the cost for some of the high end Tien shocks. If you shop good.

Kracka 08-20-2006 05:02 PM

Re: 1G Coilovers.
 
Quote:

Originally Posted by Hoffer00
I In the end it cost just under the cost for some of the high end Tien shocks.

Your Tokicos and Skunk2s didn't cost over $3000 ;) Your setup would put you right inline with the low-end Tien pricing.

sleepydsm 08-20-2006 06:45 PM

Re: 1G Coilovers.
 
Make your own threads, mofos :) Thanks for the advice Chris.

At-Least-It's-An-Evo 08-21-2006 08:24 AM

Re: 1G Coilovers.
 
Teins are top notch quality and have great customer service every time I've dealt with them Kevin. KSport and D2 are cheaper quality but I've heard they at least stand behind their product when it does fail. There are other coilovers called HotBits that seem to do well with some southern 1g owners I've spoken with.

Hoffer00 08-21-2006 08:37 AM

Re: 1G Coilovers.
 
Quote:

Originally Posted by S2kracka
Your Tokicos and Skunk2s didn't cost over $3000 ;) Your setup would put you right inline with the low-end Tien pricing.

I thought the high in was around 1500.

Guess not right

JET 08-21-2006 08:40 AM

Re: 1G Coilovers.
 
You got owned if you paid $1,500 for Tokico's and Skunk2's.

Hoffer00 08-21-2006 05:16 PM

Re: 1G Coilovers.
 
hell no i'm not stupid. I thought thats how much the high end for tien was. you can almost buy 2 sets of both for 1500 (skunk 2s and tokico gas)

JiggahMan 08-21-2006 07:12 PM

Re: 1G Coilovers.
 
Dms!!

sleepydsm 08-21-2006 10:35 PM

Re: 1G Coilovers.
 
The cheap price of the Ksports makes it almost too hard to turn away. It will at least be better than stock, and will sure make my car prettier.

sleepydsm 09-03-2006 11:48 PM

Re: 1G Coilovers.
 
I ordered Ksports through this guy at MajorMods.com. $750 to the door, and yeah they're probably being made in Korea as we speak, and should be here in a few weeks.

YiNYaNg 09-04-2006 12:55 AM

Re: 1G Coilovers.
 
I'm getting ksport too

sleepydsm 09-17-2006 09:59 PM

Re: 1G Coilovers.
 
I got my Ksports Saturday morning. They look really nice! I can't wait to drive the car with these things. Only complaint I have, is when the dampening adjustment knob is put in the top, there is too much side to side play that it moves around. I'm gonna make a sleeve that screws on and guides that adjustment-knob-shaft, or make a collar for the shaft to take out the play.

mike55112 09-17-2006 10:03 PM

Re: 1G Coilovers.
 
Cant wait to see your car running. I think it will look nicer than all your other previous 1g's, when are you putting them on?

sleepydsm 09-17-2006 10:05 PM

Re: 1G Coilovers.
 
Quote:

Originally Posted by mike55112
Cant wait to see your car running. I think it will look nicer than all your other previous 1g's, when are you putting them on?

Well, I just learned how to set them up properly, I think I'm gonna wait till the tranny is in. I'm gonna do my stainless lines at the same time.


All times are GMT -5. The time now is 11:32 AM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.