MitsuStyle

MitsuStyle (http://www.mitsustyle.com/forums/index.php)
-   Turbo / Engine / Drivetrain (http://www.mitsustyle.com/forums/forumdisplay.php?f=91)
-   -   Anyone know where i can get these? (http://www.mitsustyle.com/forums/showthread.php?t=12470)

tpunx99GSX 08-15-2006 03:32 PM

Anyone know where i can get these?
 
1 Attachment(s)
OK so i decided to take the day off and pull the tranny and then pull the pressure plate to check out the clutch (should have done this earlier) and heres what i found.
Two of the rubber peices are shredded.
Is there any places that sell these seperately so that i can just replace them and get my car running?

Kracka 08-15-2006 03:44 PM

Re: Anyone know where i can get these?
 
Time to buy a new disc. You are better off using an OEM Mitsu disc with the ACT PP instead of the ACT disc since they have known quality issues.

Super Bleeder!! 08-15-2006 04:15 PM

Re: Anyone know where i can get these?
 
ACT just revised their sprung disks. I have sitting right here. It would now be very difficult for a spring to liberate itself!

Halon 08-15-2006 04:18 PM

Re: Anyone know where i can get these?
 
How do you know if you have the old one or the revised one?

tpunx99GSX 08-15-2006 04:27 PM

Re: Anyone know where i can get these?
 
its an ACT 2100 Clutch, im just gonna go get an OEM mitsu one from a dealership i think.

Goat Blower 08-15-2006 04:47 PM

Re: Anyone know where i can get these?
 
Call ACT, they might send you a new one under warranty. I've never seen that happen before.

Pimpin Dsmstyle 08-15-2006 06:28 PM

Re: Anyone know where i can get these?
 
Quote:

Originally Posted by Goat Blower
Call ACT, they might send you a new one under warranty. I've never seen that happen before.

I second this idea. If you had the old un-revised disc, maybe they would send you a brand new one since you have an unusual issue.

Halon 08-15-2006 06:35 PM

Re: Anyone know where i can get these?
 
My ACT disc has yellow springs in it, doesn't look like that one at all. Is there a way to tell if you have the revised one?

Super Bleeder!! 08-15-2006 07:05 PM

Re: Anyone know where i can get these?
 
yea yellow springs is the new one. and it should have ridges of sheet metal partially covering the springs.


All times are GMT -5. The time now is 04:59 PM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.