Need a clutch and suggestions
 

So me and iceminion have been building up my car and we could use some suggestions and help getting a new clutch. We got a built 2.4 block and head, and currently have a stage 3 rebuild from shep coming home tomarrow. We're shooting for 4-500hp everday driven and need suggestions on which clutch and who to get it from. I'd do LSE but they're gone till the 18th. Thanks

~Mug

Re: Need a clutch and suggestions
 

There could be a huge difference in power for what you said, 500 awhp on a chassis dynamics to 400 fwhp on a dyno jet is a big difference. What turbo are you running?

Re: Need a clutch and suggestions
 

we are thinking about using a bolt-on ball bearing GT35R.

We are also open to other suggestions, we want it to be oil+water cooled and ball bearing.

That turbo is rated to "~600AWHP" <----note the use of "" and ~

so with that in mind, mugs asperaions of 4-500awhp should be realistic.

for starters (we might change our minds here) we want a lighter more forgiving clutch, to help with the daily-driven-ness of the vehicle. but I know for heavy launching we are going to need something different

LSE has constantly and consistantly suggested the southbend DXD clutch, and im willing to give it a try, the only thing I am worried about is clutch slippage under WOT

So please, anyone leave your thoghts on the matter.

Re: Need a clutch and suggestions
 

The southbend probably is your best bet. ACT 2600 will be ok for about 450 awhp (dynojet). Twin disk is an option, but spendy ($1100).