mustang throttle body
 

i found a good deal on an intake with a 75mm mustang throttle body on it.

do these have a similar 5volt tps to the ones dsms already use?

would i be able to run this on a stock ecu (dsmlink) car?

Re: mustang throttle body
 

i didn't mean to make two of these threads. Mods please delete one.

Re: mustang throttle body
 

Don't buy it if it's got an Accubreak on it.

Re: mustang throttle body
 

Accufab actually redid their shafts about a year ago. It should be fine if it has the new one on it.

Re: mustang throttle body
 

Man, my Accufab 75 has been ok for long while now. But everytime I here about them breaking, my brain hurts. Do I risk keeping it, or do I buy a different one?

Sorry about the Hijack, but yeah, I think the tps is similar, but do not know if it'll work with the ecu/link..

Re: mustang throttle body
 

Yes, the TPS works fine, you lose the ISC though. If you have an old Accufab, they will upgrade the shaft for $75.

Re: mustang throttle body
 

Don't get the Performance Products one, mine leaks at the shaft seals and whistles at idle. They said they'd replace it no problem, but I already welded the DSM pulley to the shaft. I don't use any kind of ISC, mine idles perfect at 1500 rpm after about 5 minutes.

Re: mustang throttle body
 

Is that your poor man's cruise control? :D

Re: mustang throttle body
 

What is wrong with not having to use the gas when starting from a stop?

Re: mustang throttle body
 

Cool, good to know, I'll have to do that.

Re: mustang throttle body
 

Just thought I would add that I used an accufab for quite awhile, no problems.

Re: mustang throttle body
 

Still gotta rev it up. A big turbo and a twin disk doesn't make for silky smooth starts.