Headlights harness melting
 

Ok, this is beginging to piss me off.

this is 3rd melted headlight plug...

i put factory lightbulbs back in so they are the crappy yellow weak ones.

yet the plugs keep geting melted, the plastic right next to the contact gets all melted and burned out.

Does anyone have any suggestions?

Re: Headlights harness melting
 

when i did my H4 conversion. I bought aftermarket plugs that where suposed to be more heat resistand. you could try that.

Re: Headlights harness melting
 

Wierd. I had the same problem in my Galant when I put in Silverstars, and just putting in cheapo headlights fixed it for me.

Re: Headlights harness melting
 

It's a very common problem with newer Mitsu's. Did you replace them with the O.E. pigtail harness?

Re: Headlights harness melting
 

i went to junk yard and got some used old ones..

where can i get these conversions, and how much work does it require?

Re: Headlights harness melting
 

I went to mitsu and bought new pigtail harnesses. The wires seemed like a thicker guage. With the new harnesses, and the cheapo bulbs, I'm having no more problems.

Re: Headlights harness melting
 

Yeah, they did update the harnesses with a little heavier duty ones. If I was you Enes I would go buy the pigtail harnesses from Mitsu and solder those bad boys up.

Re: Headlights harness melting
 

are parts open on saturday?

Re: Headlights harness melting
 

I don't think so.

Re: Headlights harness melting
 

I got mine on ebay. they look good and I havent had any problems yet. http://cgi.ebay.com/ebaymotors/ws/eB...category=42613

Re: Headlights harness melting
 

do the bulbs mount in the same way into the housing? or did you have to do some work on the headlights to put the H4 bulbs in

Re: Headlights harness melting
 

I will most definetely go with that.. i don't want to be modifying the housing at all..

Re: Headlights harness melting
 

Depending on how much work is needed to get this working on a 2g, has anyone else done this upgrade on a 2g?

Re: Headlights harness melting
 

I bought H4 upgrade housings to replace my pop-up sealed beams from checker. I'm not shure how the 2g headlights work but I think you might be able to just get bulbs and the harnesses I got. The ones I got are the best lights Ive seen other then HID's.