![]() |
help with 20 G
Trying to put a 20G on, and it has no 90 degree bend for the ic piping, anyone know any good ideas to ghetto it?
|
Re: help with 20 G
90* silicone coupler. Or you can have a 90* elbow welded on. I am pretty sure I have one in stock, LSE may also.
|
Re: help with 20 G
I was just going to say, I bet JET has some 90* silicone couplers.
|
Re: help with 20 G
I've got the elbow to weld on, you should've mentioned that yesterday when you were here. :D
|
Re: help with 20 G
I have an elbow to be welded on also
|
Re: help with 20 G
Well im still using the stock sidemount so ill need to pick up a 90* silicone one, how much do you want for one jet?
|
Re: help with 20 G
first off its a 17c Junior frank. It's not a 20g.
|
Re: help with 20 G
ok sorry 17C compressor housing
|
Re: help with 20 G
Quote:
|
Re: help with 20 G
I think so, he has been trying to sell it on MNSC for a while now. Maybe this guy bought it.
|
Re: help with 20 G
Holy shit that turbo has been around the block. It has its originations in Des Moines back in the late 90s.
|
Re: help with 20 G
Ha, just last night DSMers were talking about how those 17c's will not make power. Couldnt you just use some stock intercooler piping as a coupler, if you wanted to be ghetto?
|
Re: help with 20 G
Quote:
|
Re: help with 20 G
Quote:
|
Re: help with 20 G
yup, that hahn super 20g pulled strong when I had it, and I know for a fact that it's been in thehands of two seperate owners after myself. :)
|
Re: help with 20 G
I've heard all these stories about how a few select turbos manage to switch owners over years and years. Kinda neat.
|
All times are GMT -5. The time now is 12:02 PM. |
Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.