Tried Some Fiberglassing
 

Never done this before but I thought Id take a stab at it. I fiberglassed the center vents for an SAFC II. So Far it has turned out great. I still have to paint it and hopefully it wont look to out of place. Here is a couple pics of it so far. Let me know what you think...

Re: Tried Some Fiberglassing
 

Another...

Re: Tried Some Fiberglassing
 

looks pretty good man! Did you make the whole thing from scratch, or is the main plate made from some sort of template?

Re: Tried Some Fiberglassing
 

Looks very nice!

Re: Tried Some Fiberglassing
 

I grinded down the stock piece and laid fiberglass over where the vents go. Then sanded that til it was kind flat and then put some bondo down to make it flat and smooth.

Re: Tried Some Fiberglassing
 

looks good.

I'm sure you know this, but if you are painting, prep work is 90% of what makes it look good, and with my experience with fiberglass, there can be rough spots that are hard to feel and see, but when you lay down the paint, you will notice a nice gouge somewhere.

Re: Tried Some Fiberglassing
 

Dude I need to do that with my car, you should help me make one.

Re: Tried Some Fiberglassing
 

Good job!

Re: Tried Some Fiberglassing
 

Find somewhere nice and warm to put it for a few days (about 100-120 degrees F). It will cure a little more with heat. Make sure you sand it a ton. All the little imperfections will show when painted.

Looks nice. Good luck!

Re: Tried Some Fiberglassing
 

Finished it up today and installed the wiring for the SAFCII. Paint has some flaws in it but I got sick of dickin around with it so it looks good for now. Let me know what you think.
Mike

Re: Tried Some Fiberglassing
 

that looks really nice :D
hey want to do that with my 1g headliner ;)
ok not really but looks nice

Re: Tried Some Fiberglassing
 

I hate you. Just joking. It looks real good.

Re: Tried Some Fiberglassing
 

Thanks guys! It took way longer then I though it would. But it looks nice and looks like it belongs there.

Re: Tried Some Fiberglassing
 

Very Nice.!

Re: Tried Some Fiberglassing
 

nice job blageo! my dad is a body man i am going to have him help me with something like that. How did you get the head to stop coming out of those holes were they normally did?

Re: Tried Some Fiberglassing
 

What? Im confused.

Re: Tried Some Fiberglassing
 

Convertible?

Re: Tried Some Fiberglassing
 

Yes

Re: Tried Some Fiberglassing
 

Looks good!

My super AFC is in the glove compartment.. i want to make something for it to sit in there. Could I make something with fiberglass?

Re: Tried Some Fiberglassing
 

Nice! Be sure to block the vents behind there, otherwise your a/c and/or heat will fill your dash before you get to feel it :)