MitsuStyle

MitsuStyle (http://www.mitsustyle.com/forums/index.php)
-   Turbo / Engine / Drivetrain (http://www.mitsustyle.com/forums/forumdisplay.php?f=91)
-   -   90 tranny question (http://www.mitsustyle.com/forums/showthread.php?t=10711)

sleepydsm 03-16-2006 11:17 PM

90 tranny question
 
What do I need to put a 1990 awd tranny into my 1992 awd car other than: 90 shifter cables/assembly/gear selector, transfer case. Will my 92 axels work? Same clutch too?

acidrumz 03-17-2006 08:24 PM

Re: 90 tranny question
 
dont' forget that bracket that holds the cable down on the 90 tranny. the 91+ brackets are slightly different.

you should be fine with those.

gluck
yy.

sleepydsm 03-17-2006 08:33 PM

Re: 90 tranny question
 
thanks.

Berda 03-21-2006 12:03 AM

Re: 90 tranny question
 
im pretty sure that all years are the same as far as the front axels go.

Outlaw1 03-21-2006 07:55 AM

Re: 90 tranny question
 
You don't have to swap shifters, cables, etc. Pull the shifter arm off of the '92 trans and reuse it on the '90 trans with the '92 cable bracket.


All times are GMT -5. The time now is 03:39 PM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.