MitsuStyle

MitsuStyle (http://www.mitsustyle.com/forums/index.php)
-   Turbo / Engine / Drivetrain (http://www.mitsustyle.com/forums/forumdisplay.php?f=91)
-   -   urgent help (http://www.mitsustyle.com/forums/showthread.php?t=10243)

demon 01-31-2006 05:39 PM

urgent help
 
after I installed a 14b into my 2g I have white smoke coming out my exhaust? what can I do to fix the problem? help please

niterydr 01-31-2006 05:58 PM

Re: urgent help
 
White smoke is usually coolant.
How much boost are you running?
How reliable is your turbo?

demon 01-31-2006 06:12 PM

Re: urgent help
 
Quote:

Originally Posted by niterydr
White smoke is usually coolant.
How much boost are you running?
How reliable is your turbo?


The turbo was ported at qpr with no shaft play. boosting stock. Alot of white smoke coming out. Coolant?

niterydr 01-31-2006 06:15 PM

Re: urgent help
 
Let it run for a little bit, but watch your temps and your coolant level.
Is this on car start-up (Did you just install the turbo?), or did you go out and do some pulls and then the smoke started?

demon 01-31-2006 06:21 PM

Re: urgent help
 
Quote:

Originally Posted by niterydr
Let it run for a little bit, but watch your temps and your coolant level.
Is this on car start-up (Did you just install the turbo?), or did you go out and do some pulls and then the smoke started?


after I installed it. I let the car run then no white smoke after I took it around the block parked it running then alot of white smoke starting coming out.

sleepydsm 01-31-2006 06:48 PM

Re: urgent help
 
Well coolant does enter and exit the turbo...
Could this be a headgasket issue?

FattyBoomBatty 01-31-2006 06:57 PM

Re: urgent help
 
any leaks around the bolts for the coolant lines? i know mine has copper crush gaskets and if they went bad it could leak.

demon 01-31-2006 06:58 PM

Re: urgent help
 
Quote:

Originally Posted by sleepydsm
Well coolant does enter and exit the turbo...
Could this be a headgasket issue?

their is no coolent on the oil stick or in the radiator. I don't think it's the head gasket. I just replaced my injectors. I thought that one of my injector was stuck open but it's not the case.

demon 01-31-2006 07:02 PM

Re: urgent help
 
Quote:

Originally Posted by Conquest Of Paradise
any leaks around the bolts for the coolant lines? i know mine has copper crush gaskets and if they went bad it could leak.

I'm going to take it apart to see if the washers went bad. That might be it.

x-pride 01-31-2006 07:23 PM

Re: urgent help
 
Could it just be condensation from the cold weather. I know my DSM show similar symptoms on cold MN days but during the summer it totally goes away.

TurboDomestics 01-31-2006 09:33 PM

Re: urgent help
 
Are you sure its not the Head gasket?

Jesse seemed pretty sure, but who knows.

There wouldnt really be any coolant on the dipstick because it would just bead off, and if their was oil in the radiator it would be by the bottom. Try draining the oil and see if theres any coolant, or try draining the radiator. You can always fill it up for free at work so its worth a shot.


All times are GMT -5. The time now is 10:01 PM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.