MitsuStyle

MitsuStyle (http://www.mitsustyle.com/forums/index.php)
-   Member Intros/Bios (http://www.mitsustyle.com/forums/forumdisplay.php?f=64)
-   -   Maple Grove 1st time dsmer here (http://www.mitsustyle.com/forums/showthread.php?t=10169)

boosted2g 01-26-2006 02:36 AM

Maple Grove 1st time dsmer here
 
What up everyone, I am Adam. I am from Maple Grove, I just bought a 2g GST Spyder. I will prolly ask alot of questions cause i wanna build this car up right, I have Rick Shindly in my corner through some friends and i hear he is the right guy to help me with. But i will be looking for more help, If your local hit me up, we can get together when ever. 763.274.4142

Jana 01-26-2006 08:14 AM

Re: Maple Grove 1st time dsmer here
 
Quote:

Originally Posted by boosted2g
I will prolly ask alot of questions cause i wanna build this car up right, I have Rick Shindly in my corner through some friends and i hear he is the right guy to help me with.

Umm, no. Not sure who passed you that information.

Anyway, welcome to the site. You'll find most everyone here is extremely helpful and will guide you in the right direction. :D

niterydr 01-26-2006 09:14 AM

Re: Maple Grove 1st time dsmer here
 
Welcome to the forums.

Outlaw1 01-26-2006 09:24 AM

Re: Maple Grove 1st time dsmer here
 
Welcome to the site.

Kracka 01-26-2006 11:06 AM

Re: Maple Grove 1st time dsmer here
 
Rick is a great guy, back when I owned a DSM he did a lot of work for me and never once did I have a problem (he even skipped Easter dinner once to install a cluch in my car). He should be able to help you with what you need as far as fixing your car goes. Look elsewhere for mod-list advice though.

Kracka 01-26-2006 11:06 AM

Re: Maple Grove 1st time dsmer here
 
Quote:

Originally Posted by DSMChick
Umm, no. Not sure who passed you that information.

He fixed your car when it needed fixing ;)

dsm10sec 01-26-2006 11:33 AM

Re: Maple Grove 1st time dsmer here
 
Last time I talked to Rick, about four months ago. He said, "I have a contract job now and not wasting my time on cars anymore."

Maybe he lost that job?

Either way, welcome.

AJ 01-26-2006 11:47 AM

Re: Maple Grove 1st time dsmer here
 
Quote:

Originally Posted by S2kracka
He fixed your car when it needed fixing ;)

He worked on our cars a few times, and a few times they had to get re-worked by others afterwords. ;)

And from my understanding he's done with cars due to actually finding a job in his field.

Jana 01-26-2006 12:30 PM

Re: Maple Grove 1st time dsmer here
 
Quote:

Originally Posted by S2kracka
He fixed your car when it needed fixing ;)

He also messed up my AFC at the same time.... when I specifically said "don't touch".

Bode 01-26-2006 01:26 PM

Re: Maple Grove 1st time dsmer here
 
Welcome to the site.

TheBlizzard 01-26-2006 01:32 PM

Re: Maple Grove 1st time dsmer here
 
Alright alright, is this going to turn into another Shindley thread? I hope not. Welcome to the board. There is plenty of up to date information on this board to help you along the way. Be careful the DSMers here are crazy though, we like to run over 17psi so you better watch out.;)

niterydr 01-26-2006 01:50 PM

Re: Maple Grove 1st time dsmer here
 
Quote:

Originally Posted by TheBlizzard
Alright alright, is this going to turn into another Shindley thread? I hope not. Welcome to the board. There is plenty of up to date information on this board to help you along the way. Be careful the DSMers here are crazy though, we like to run over 17psi so you better watch out.;)

Its 15psi that you can run on pump, 17 is c-16 territory.

iceminion 01-26-2006 03:33 PM

Re: Maple Grove 1st time dsmer here
 
So i should probably turn it down from 36lbs right?

welcome to the forum, where the hell do you live in 'grove? I'd like to see a nice 2G again, its been a while.

I think you should AWD your spyder first.

Dont ever listen to anything I say, im one of those crazy DSMers.

TkrPerformance 01-26-2006 06:20 PM

Re: Maple Grove 1st time dsmer here
 
welcome
If you have spyder question ask me I have a 98 awd 6bolt spyder

Tauni 01-26-2006 06:26 PM

Re: Maple Grove 1st time dsmer here
 
Hey! When I first got on this site I had a n/a auto Talon. Clean, but slow none-the-less. Actually it was extremely slow. Slower than my real Neon that I have right now. It's pathetic. Anyways, like you I had a million questions, and reading up and asking people on this site has helped me a lot. So I took my Talon out, ran it into traffic, collected some insurance money, and now I'm picking up a 1g GST! Haha, well actually thats not really how it all went down but its more entertaining than what actually happened. Anyways, you should be able to find all of the help you are looking for here. Good luck though!

sleepydsm 01-26-2006 06:47 PM

Re: Maple Grove 1st time dsmer here
 
Welcome! Spyders are SO cute.

Tauni 01-26-2006 07:02 PM

Re: Maple Grove 1st time dsmer here
 
Speaking of Spyders, where is Blageo? Thought he would be here by now :p

turbotalon1g 01-26-2006 09:59 PM

Re: Maple Grove 1st time dsmer here
 
welcome. These guys know there stuff and are a big help. see you this summer

howslowcanyougo 01-26-2006 11:02 PM

Re: Maple Grove 1st time dsmer here
 
Welcome to DSMSTYLE....!

Rick did some good work for me before as well, but I just talked to a couple months back and he's ALL done with ANY DSM work as he has a long term Engineering contract with Honeywell?

If you want to get some quality work done at a good price, Talk to Swanney or John over at LSE, I can totaly vouch for their outstanding honesty, work and value! These guys really know what there doing and wont' ever shake you down!


Howie


LSE Performance
763-427-2224

Shotgun! 01-26-2006 11:27 PM

Re: Maple Grove 1st time dsmer here
 
Welcome. You better be at the weekly KK meets!


All times are GMT -5. The time now is 10:12 AM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.