F/S Tactrix Openport 2.0 w/ Mitsubishi reflash adapter
 

SOLD

F/S Tactrix Openport 2.0 w/ Mitsubishi reflash adapter $110 (includes Paypal fees and shipping to anywhere in MN or WI)

$100 picked up in Winona, MN 55987

TXT 763-202-1070




"
The OpenPort 2.0 is our newest tuning tool hardware that is capable of communicating with a most OBDII compliant vehicles using a standard J2534 interface. Combined with our EcuFlash software, the OpenPort 2.0 is capable of reflashing a large number of newer Subaru and Mitsubishi vehicles, and support for other cars is in progress.We include a USB cable with each OpenPort, which is all the hardware you'll need unless you have one of the few vehicles that require a separate reflash adapter. For Subaru you'll only need a reflash adapter for the 2001 through 2005 WRX, but not STi. For Mitsubishi, you'll need the adapter for most pre CAN vehicles which include the 5-9 Evo. Choose the adapter you need from the 'Reflash Adapters' drop down list on the right side of this page.
Technical Details

72Mhz 32-bit processor
USB 2.0 full speed device (USB-A/Mini cable included)
Field upgradeable software
Supports these major OBD protocols:
CAN 2.0 (CAN/ISO15765)
K-line (ISO9141/ISO14230(KWP2000)/dual K line)
J2534 PassThru support with Windows DLL
Standalone datalogs to microSD / microSDHC card without a laptop
Able to apply GND or 5V-25V to OBD pins 1,3,9,11,12,13 or AUX 2.5mm stereo connector
Able to log from Innovate Motorsports 2.5mm stereo MTS data bus
RGB status LEDs
Designed, manufactured, assembled, and tested in San Francisco, USA"

http://www.tactrix.com/index.php?opt...hk=1&Itemid=53

Re: F/S Tactrix Openport 2.0 w/ Mitsubishi reflash adapter
 

Your link isn't working for me.

I might have to get this from you.. We'll see!

Re: F/S Tactrix Openport 2.0 w/ Mitsubishi reflash adapter
 

sorry about the link, it was just to their website. lmk if you want it!!