Dolneys drag build
2 Attachment(s)
So as most of you have seen I started a build thread for the red 2g that we picked up not long ago. My girlfriend decided to keep and finish that 16g build and drive it so that left me car-less which made me on the look out for a car. Didnt take long before I got the chance to take a look at and buy this 93 1gb talon. Some of you may recognize it but it used to be map’s old 1g from what i hear, it has a full certified cage with a tubed front end ready to go. I could not be more excited to have a awsome base to build off of and get this thing going. I have thrown a little list together of parts i will forsure be getting but for the most part im still at the drawing board. The list will change and get bigger as i dig into the car more
Engine : Built aluminum rod 6 bolt shortblock Built 7 bolt head Gsc s3 cams Magnus intake manifold Drivetrain/suspension Ppg dogbox Driveshaft shop axles Boostin performance built tcase Quart master triple disk Frontline fab diff cover / bearing caps Bulfab mustache bar Bulfab 1 peice front crossmember D2 drag coilovers Turbo: Pte gen2 6062 Jmfab manifold Fuel: Jmfab fuel cell Fic 2150s fuel injectors Fuel pump ( mechanical) ?!? |
Re: Dolneys 2nd drag build
Oh cool; you bought it from Cam.
|
Re: Dolneys 2nd drag build
Quote:
|
Re: Dolneys 2nd drag build
Ffff yeah. That car has some history that is for sure.
Glad to see you want to stick to a manual, means it will be on the street for sure. So is your girls car gonna be a 16G beast? Any reason you are choosing that turbo? IIRC you have it already from your suby build right? Can't wait to see these cars of yours out. |
Re: Dolneys 2nd drag build
Glad it stayed local!
|
Re: Dolneys 2nd drag build
Quote:
|
Re: Dolneys 2nd drag build
Drivetrain:
Ppg dogbox This equals subscribed! What options did you decide to go with? David, |
Re: Dolneys 2nd drag build
Quote:
|
Re: Dolneys 2nd drag build
Ever thought about TMZ in Wisconsin? I know he's been helping with boostin demons stuff
|
Re: Dolneys 2nd drag build
Oh ok, i see. The pinion drive and front diff cross shafts being a liability have me paranoid to do the upgrade...but i suppose we will see how it goes. The spool that generally is put into it makes it rather not street friendly. Perhaps mark can pitch in on the street driving a dog box...as he has one and let us know perhaps its not to bad...but i cant imagine driving a welded center with theoretically a locked front diff or spool and trying to take any turns for that matter. Straight race car!
|
Re: Dolneys 2nd drag build
Quote:
|
Re: Dolneys 2nd drag build
You do realize that the dogbox stage 5 from tmz is OEM gears that are just faceplated for 4k?
|
Re: Dolneys 2nd drag build
Quote:
|
Re: Dolneys 2nd drag build
Its up to you I was just pointing out that it's faceplated gears by Liberty. Liberty charges just about $1000 for putting dog engagement on 1-4 gears, sleeves, and hubs. So for an extra 3k on top doesn't seem worth it to me.
|
Re: Dolneys 2nd drag build
Quote:
|
Re: Dolneys 2nd drag build
Just message tim Zimmer and hear what he has to say.
Good thing is he's almost always checking in on tuners and ecmlink. Even if you don't go with his stuff he's always trying to help. |
Re: Dolneys 2nd drag build
Glad to get involved in this one! If you drag race and make a lot of power, the only solution for a manual transmission in a dsm is the PPG gear set. A faceplated gear only help with shifting not the strength of the gear. Factory gear sets fail at anything over 700whp. I was replace the factory 4th gear after 30 to 40 passes, then I made more power, and broke them in a hand full of passes.
|
Re: Dolneys 2nd drag build
Quote:
Also been looking at fuel pumps and have my mind set kindof on the weldon 1100-a with a 10an feed line and 8an return. Any other options you guys might have or think of something just let me know ! |
Re: Dolneys 2nd drag build
Badass! Ur in my neck of the woods.
|
Re: Dolneys 2nd drag build
Great color!
|
Re: Dolneys 2nd drag build
I would over kill on the pump just to be sure that wont be an issue down the road. Like a weldon 2015a or magnafuel mp 4102.
|
Re: Dolneys 2nd drag build
Quote:
|
Re: Dolneys 2nd drag build
Quote:
|
Re: Dolneys 2nd drag build
1 Attachment(s)
Quote:
Also picked up some carbon fiber goodies and bumper shutters from Mark and cannot thank him enough for this stuff. Thank you again Mark!!! |
Re: Dolneys 2nd drag build
Quote:
|
Re: Dolneys 2nd drag build
So many race cars being built! I will vouch for tmz, you get what you pay for with him and the dog box is a good idea for big power. I am gonna have to do the same after I ruin my tmz built trans. It has been handling my power up tell now at least.
|
Re: Dolneys 2nd drag build
Quote:
|
Re: Dolneys 2nd drag build
Quote:
|
Re: Dolneys 2nd drag build
I agree on going mechanical.
|
Re: Dolneys 2nd drag build
1 Attachment(s)
Carbon fiber fenders and hood mounted up. I have to say this color blue and carbon fiber looks so good
|
Re: Dolneys 2nd drag build
Another Mark L... twin...do it
|
Re: Dolneys 2nd drag build
Quote:
|
Re: Dolneys 2nd drag build
2 Attachment(s)
Some stuff showed up today my bulfab single peice front crossmember and mustache bar which i will send out to get powdercoated with all my other stuff. Also my complete set of poly bushings showed up.
|
Re: Dolneys 2nd drag build
1 Attachment(s)
Fic 2150s showed up more to come soon
|
Re: Dolneys 2nd drag build
1 Attachment(s)
My Jmfab fuel cell showed up today ! Has 2 10an sump fittings with a 8an return and also anodized black. Also dropped my complete rear end today to send off to get powdercoated and will be replacing the control arms with volk tubed ones and all bushing/bolts will be replaced as well
|
Re: Dolneys 2nd drag build
Ballin'
|
Re: Dolneys 2nd drag build
2 Attachment(s)
Finished up gutting the rest of the interior tonight and man that sound insulation stuff behind the dash is heavy as hell. Also pulled all the heater / ac junk, I have to say it was all quite a bit of weight all together. Now just to paint the cage and put the some of the interior back in.
|
Re: Dolneys 2nd drag build
Nice work! What color you going to paint the cage?
|
Re: Dolneys 2nd drag build
Quote:
|
Re: Dolneys 2nd drag build
Sure you can lol
|
All times are GMT -5. The time now is 06:30 PM. |
Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.