MitsuStyle - Something that blows black!...kinda'.

MitsuStyle (http://www.mitsustyle.com/forums/index.php)

- Project Talk (http://www.mitsustyle.com/forums/forumdisplay.php?f=5)

- - Something that blows black!...kinda'. (http://www.mitsustyle.com/forums/showthread.php?t=33694)

Re: Something that blows black!...kinda'.

From the grave. Blew out part of the head gasket awhile ago. Just getting around to the work now. Fawk.

https://i.imgur.com/Bhh2roy.jpg

https://i.imgur.com/UruRf1C.jpg

https://i.imgur.com/RQn2uVS.jpg

Probably gonna end up being a full-rebuild with some extra junk. Stay tuned.

Re: Something that blows black!...kinda'.

Well you probably wouldn't believe me if I told you but this piston has close to 290,000mi. on it. I only removed one to measure the top compression ring to top of piston so I can get the right pistons. Bearings don't look bad either. Haven't looked at the mains yet.

https://i.imgur.com/cCrzWQS.jpg

https://i.imgur.com/8ulPjyI.jpg

Bore is pretty dirty/smudged but "clean" in the machining/hone sense. Doesn't seem all that bad just evenly worn. L-19 or 625s will distort those walls though if I throw these back in. So .020" is the plan.

https://i.imgur.com/cHEQ3dM.jpg

Re: Something that blows black!...kinda'.

Just put in an order with Pure Diesel Power and Xtreme Diesel Performance. Ordered probably a quarter of what I actually need but it's the larger engine/internal items. Now if XDP will ship my stuff since they put a possible fraud warning on my order.. Derp.

https://i.imgur.com/PqRuH3j.png

https://i.imgur.com/h6trNMq.png

Re: Something that blows black!...kinda'.

After about 2 months (give or take a few weeks), I finally got my engine from Motors by Gosh. There was some apparent miscommunication over the few months between scheduling to drop this off and getting to the work. I originally was going to disassemble the engine completely but didn't have all of the necessary tools. I was also between driving truck at night and becoming a co2 laser technician (whole story there in itself). Between John and his worker(s) there must've been a few things lost in "translation". lol

Sometime in November I got a call saying they didn't realize I was bringing them a shortblock and that they don't normally disassemble things before work. With John totaling his race car down south and getting a little banged up work was backed up for them. So after close to a month at his shop waiting they kicked it back another three weeks. I arranged pick-up for the block/crank and got the rest on the 7th. So that weekend a buddy brought a nice electric ring file up and we went to work. We sorta' just decided on .022" for top ring gap and .047" lower. About a .005" change on the top ring and .002-003" on the lower.

https://i.imgur.com/CIDSQMz.jpg

https://i.imgur.com/vTpVpkm.jpg

The block and head got the works: bored/honed with torque plate, resurfaced and grove for fire rings (block and head), rebuilt head with Industrial Injection 150lbs springs, rotating assembly balanced and the crank got polished. Really all that is left is to measure everything, do a final cleaning and throw it together. As far as I know the only parts left are main and rod bearings. Possible a rear main seal.