WTB: 1g dsm parts
 

lookn for parts for my 90 tsi awd project, lookn for a awd driveshaft, engine cradle, awd tranny, ecu has to be out of a 90 tsi awd or gsx awd, fmic kit, some upgraded injectors 550-650cc, real 16g turbo, walbro 255 fuel pump, aftermarket full exhaust, lowering springs, n a **** ton of interior. lmk what ya got

Re: WTB: 1g dsm parts
 

Have a real mhi small 16g for sale in the for sale section.

Re: WTB: 1g dsm parts
 

I've got the AWD tranny, it's a 91 though.

Re: WTB: 1g dsm parts
 

oh would that 91 tranny still work for my 90?

Re: WTB: 1g dsm parts
 

no, the 90 transmission, transfer case and shifter cables are specific to that year.

I would suggest converting your car to 91+, its cheap, and easy and you don't have to deal with the 90 BS anymore, thats what shep says too.

Re: WTB: 1g dsm parts
 

what do i all have to do?

Re: WTB: 1g dsm parts
 

Install a shifter assembly and shifter cables from a 91-94

Re: WTB: 1g dsm parts
 

aight anybody know where i can get a shifter assembly n shifter cables?

Re: WTB: 1g dsm parts
 

I have the driveshaft, the two rubber support bearings have been replaced new with oem parts. I also have the shifter assembly and shifter cables too. They both are from 91+ dsm. LMK...

Re: WTB: 1g dsm parts
 

can i use the driveshaft on my 90 even tho its off a 91+?

Re: WTB: 1g dsm parts
 

iirc, you will need a 91+ tranny/transfer case to mate with the 91+ driveshaft because of the spline count of the tc.

Re: WTB: 1g dsm parts
 

Im pretty sure that the spline count on the driveshafts are all the same 90 - 94.

If you have a 1990 Tranny & X-Case and you want to switch over to a 91+ setup you will need to change your tranny and X-case but the driveshafts are the same 90-94.

I dont know if i misread your post or not but hopefully that clears up the confusion.

-Stephan

Re: WTB: 1g dsm parts
 

ok it must have been just the tc that has the different spline counts per 90/91+
thanks for clarification, so to the op, yes the driveshaft would fit.

Re: WTB: 1g dsm parts
 

ok i found a awd driveshaft out of a 93 n i also found a 91 awd tranny but i dnt thnk the transfer case is included

Re: WTB: 1g dsm parts
 

To use a 91-94 trans in your 90 you can do one of 2 things:
(1)swap the cables, and shifter assembly
(2)swap out the bracket on the transmission

89-90 T-cases are 22 spline input whereas 91+ are 23-spline. The outshafts of all T-cases are 21-spline (in other words the propshafts will interchange) Most driveshafts will fit into any 1g trans, awd/fwd/AT/MT doesn't matter.

To use a different t-case (ie, 22 T-case to 23 spline trans) you can simply swap out the output shaft from the transmission. Literally takes 15-20 mintues and doesn't require transmission removal. In other words, running a 91+ trans (23-spline) with a 90 T case (22 spline) just aquire a 22-spline output shaft (I keep 1 of each just for that reason)

Wiz

Re: WTB: 1g dsm parts
 

aight..i found a tranny..i just need a t case now..anyone got one?

Re: WTB: 1g dsm parts
 

Do you have any t-cases?

Wiz

Re: WTB: 1g dsm parts
 

no thats y im looking for one lol

Re: WTB: 1g dsm parts
 

Ok, I'm no help though since I only have 2 AT T-cases.

Wiz

Re: WTB: 1g dsm parts
 

I have a 22 spline and a 23 spline x-case if your interested.. PM me if your interested

-Stephan