90 Laser Shell / FWD auto drag shell
 

1990 FWD Laser shell $500/BO
I swaped to auto last season using the kiggly mod to control shifting
w/auto trans it weighed in at 2490 pounds
6 point mild steel roll bar
Repainted in 2009 not a show piece but looks better then 90% of the 1Gs out there jams and under hood are a different red front bumper has some paint damage from loading and unloading from the trailer. the rear bumper has a spot that the paint pealed when I was removing the rear crash bar. I have enuf paint left from painting to tuch up the bumpers
Walbro 255 on a custom dual hanger -6 feed from tank
Kyb gr2 shocks with eBay coilovers springs swaped for traction Limiter straps on front for traction.

I can also include my cobra wheels drag slicks and FMIC for the right price.

many pics of the car and roll bar on my cardomain http://www.cardomain.com/ride/239664...plymouth-laser

PM or call or text @ 612-940-7671

http://i1124.photobucket.com/albums/..._2473792_n.jpg
http://i1124.photobucket.com/albums/...n/DSC02774.jpg

Re: 90 Laser Shell / FWD auto drag shell
 

Bump. I want this out of my garage. someone has to want to build a auto FWD drag car. I can deliver.

Re: 90 Laser Shell / FWD auto drag shell
 

BUMP $500 or best offer. I will deliver. need this out of my garage

Re: 90 Laser Shell / FWD auto drag shell
 

fuck thats cheap

Re: 90 Laser Shell / FWD auto drag shell
 

I just want it gone, and to a good home.

Re: 90 Laser Shell / FWD auto drag shell
 

What's it all include? How stripped is the shell? I have a friend interested.

Re: 90 Laser Shell / FWD auto drag shell
 

:rollinglaugh:

Fat chance around here. Bman is your only hope.

Re: 90 Laser Shell / FWD auto drag shell
 

I mean not a scrap yard. I want to see it back on the road or the drag strip. I was hopeing Brandon would take it but I'm not getting my hopes up with him building a new houe and all.

Re: 90 Laser Shell / FWD auto drag shell
 

It is pretty stripped. To run it will need motor, trans, wheels and ECU. to swap back to 5-speed it will need pedal asembly and master and slave cyl's I think I have shifter and cables still.

interior wise it needs seats, harnesses ( I have one out of date left) and headliner. still has door panels carpet full dash and cenet councel.

Re: 90 Laser Shell / FWD auto drag shell
 

I think Katy would flip out if she came home and saw this sitting in the garage, lol.

Then again, she did just spend $300 on some vibrating weight loss thing...

Re: 90 Laser Shell / FWD auto drag shell
 

It would be auto so you both could drive it!

Re: 90 Laser Shell / FWD auto drag shell
 

This could be a fun project if some people want to go in on it together. Start basically from scratch, build it strictly for the track. FWD Auto drag queen.

If some people were interested in doing a kind of "team" build with this chassis, I might be down with that. Just can't keep it at my place.

Re: 90 Laser Shell / FWD auto drag shell
 

I don't have a place to keep it either. :o(

chumpcar?

Re: 90 Laser Shell / FWD auto drag shell
 

I'd even be willing to donate it to a team efort and help work on it. but dont have room for it either.

Re: 90 Laser Shell / FWD auto drag shell
 

I have room.

Re: 90 Laser Shell / FWD auto drag shell
 

Oh snap son! could we be forming a race team right now?

I think so!!! But if I'm involved in this, then i can sell mine!

Re: 90 Laser Shell / FWD auto drag shell
 

If you guys go down this path, but be realistic about the amount of cash investment it takes to build the car, buy the suits, get to the races etc. As it will likely be much higher than initially estimated. Also be realistic about the amount of time involved.

Also make sure the AIV will actually work within the ChumpCar rules.

Re: 90 Laser Shell / FWD auto drag shell
 

I'll come help turn a wrench too if it goes to Stillwater!

Re: 90 Laser Shell / FWD auto drag shell
 

Lets build a low budget drag car.

Re: 90 Laser Shell / FWD auto drag shell
 

I wouldnt have time to do mutch racing or money to invest. But I still like the idea. Chump car wouldnt work out for me but it would be pretty cool to see the car do that way.