MitsuStyle

MitsuStyle (http://www.mitsustyle.com/forums/index.php)
-   Mitsu vehicle parts for sale (http://www.mitsustyle.com/forums/forumdisplay.php?f=78)
-   -   WTB: 2g Awd Gas Tank (http://www.mitsustyle.com/forums/showthread.php?t=34494)

mark4g63t 07-20-2014 10:28 PM

WTB: 2g Awd Gas Tank
 
In need of a awd gas tank for my 2g. Mine apparently has a hole in it that leaks after filling it with about $30 worth of gas.
9528071021
Mark

mark4g63t 07-21-2014 11:47 AM

Re: WTB: 2g Awd Gas Tank
 
Think I found the issue. The plastic spin on thing for the fuel pump housing looks to be the culprit, not sure if it's crooked or stripped.

dsmreck 07-21-2014 03:05 PM

Re: WTB: 2g Awd Gas Tank
 
Is it possible you are installing it wrong with the gasket? Those can be tricky. No offense btw

DSMINMN 07-21-2014 05:48 PM

Re: WTB: 2g Awd Gas Tank
 
+1 for that. I've done it before on a friend's car before I had my license and it took a few tries. Then it were a few years until I did the pump in my 2ga. I just did that maybe a month ago or so. It took a few minutes to figure it out.

blageo23 07-21-2014 10:26 PM

Re: WTB: 2g Awd Gas Tank
 
I have a gas tank if it turns out to be anything else.

mark4g63t 07-21-2014 11:27 PM

Re: WTB: 2g Awd Gas Tank
 
1 Attachment(s)
Turned out that it is completely saturated and torn up pretty bad. I did Read that they could be tricky, so when the new one comes i'll be sure to take caution.

mark4g63t 07-25-2014 01:31 PM

Re: WTB: 2g Awd Gas Tank
 
1 Attachment(s)
asap. Well I need a new sending unit/ hanger. 2G AWD. or If someone is willing to weld an -AN fitting onto mine.

blageo23 07-25-2014 03:58 PM

Re: WTB: 2g Awd Gas Tank
 
2 Attachment(s)
I drilled mine out where it meets the top of the sending unit then put a 90 degree barb to AN fitting there and used JB weld to hold it in place. Not very good pictures but you get the point.

mark4g63t 07-26-2014 06:47 AM

Re: WTB: 2g Awd Gas Tank
 
Thought about doing that. I even went to db and got the fittings, but didn't want to mess with the factory pump o-ring piece thats on the other side so instead I ended up cutting one of the male -an's off drilled it out to match the line diameter and welded it onto the line. I'm hoping it will not leak. Last night I f'd up the hardline under the car trying to drill that out so my next question is, will it leak if I just put the hose over the line and clamp it down? It's the feed hose right after the pump.
Still interested in trying to find a sending unit just incase it leaks.

TkrPerformance 07-26-2014 09:03 AM

Re: WTB: 2g Awd Gas Tank
 
Yes it will leak. The the line on the car is bad you will have to buy a tank to engine an links kit.

mark4g63t 07-27-2014 08:27 AM

Re: WTB: 2g Awd Gas Tank
 
1 Attachment(s)
Anyone have a tank to filter line with a male -an fitting?
or
A fitting for the fuel rail -6 AN (For the inlet, not sure if it matters)http://www.streettunedmotorsports.co...l_fittings.htm

Going to be putting this in with it.


All times are GMT -5. The time now is 04:06 PM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.