Re: Project Lex
 

Awesome!

Sucks you have to ship it to get it tuned, no other solutions that would work locally? Or does switching to something non squirt make the price of shipping look decent? Cool hes tuning it for free though.

Re: Project Lex
 

Not many locally want to tune MS. The ones that will (like shane) i trust, however they may not be able to try and fix some of the bugs ive been dealing with like the signal noise issue. So thats why im shipping it to Jordan because he has dealt with that a lot, and his area of expertise is this exact application. I couldnt put it in anyone betters hands. Once thats all squared away, then local tuning becomes a much better option because youre not dealing with the bugs anymore.

I have thought about switching to say AEM but there is a cost there. But theres a cost to ship the car too. I thought about it and just decided to ship it. If for some reason he just cant get it to work right then i guess ill really be considering switching.

Re: Project Lex
 

Wow, shipping across the country for tuning, very Ferrari-esque. :D

Re: Project Lex
 

Just read through your build, and I must say very cool!! I barely see these cars anymore, but to see one with a turbo is awesome! Nice work.

Re: Project Lex
 

Got to love noise and sync loss.. I've been fighting that in my Audi Coupe Quattro (MS3x) for a few months... I forget, what's the crank and cam signal setup on the 2jz?

Re: Project Lex
 

24 - 1 setup (VR Sensors). There are actually 2 cam signals but I'm just using 1 since that's all MS3x has inputs for.

Re: Project Lex
 

Another small update. Fresh tranny and diff fluid in. Also I ordered up some LED's, so the interior convenience lighting is all switched over to LED now. Ricer stuff!

Lastly, I played a bit with software filtering some more. I may be sitting better as far as that noise issue goes. If so then I won't be shipping the car. Time will tell though, I'm not holding my breath, but maybe I got lucky. I did get some estimates, and to ship the car is roughly $1k each way. That's a lot of dough, so if I do end up needing Jordan he said he'd be willing to fly up here. I'd pay for his ticket, but all in all it'd probably end up being half the price of shipping the car.

I also bought an Infinity Basslink to simplify things. I loved the one I had in the Talon, but in this car it just does not sound right. So I may have a basically brand new Basslink up for sale soon.

Re: Project Lex
 

Basslink works well in open cabin cars (hatchbacks, SUV's, minivans etc). Have one in the sequoia and love it.

If you sell, let me know. I want my bro to put one in his minivan.

Re: Project Lex
 

Double post from phone

Re: Project Lex
 

Bass link in minivan? Hahaha
I was gonna call dibs, but I'll get in line.

I hope the issue is solved, let me know if you want some help tuning.

Re: Project Lex
 

Sure. If he wants to try it out for a day that's no biggie. I paid like $170 shipped for it I think. I don't want to take a huge loss on it or I might just put it in the Envoy or something. If he makes a reasonable offer I'd sell it to him.

Re: Project Lex
 

Small update. Been driving the car quite a bit. Seems to be running pretty nice actually. I have to go look through my notes, but the WG spring setup I have in there now must be around 17psi. Car feels real strong. Idle and cruising is pretty much perfect, which I think is a result of Shane's initial tuning from last year. Starting still has some room for improvement but I'm OK with how it is for now.

So with that being said, I've scheduled a few hours of dyno time on the 20th at RavenWorks for some WOT tuning. Assuming dyno time goes well and doesn't uncover any issues, the goal is to keep boost at spring pressure and setup some conservative fuel and timing curves. And then just enjoy it. It'd be very gratifying if I can hit the 500hp mark! But not really going for numbers here, just going for a solid conservative setup that I can enjoy for now. Then once I'm comfortable with it I can work out any minor issues and turn the boost up little by little.

Re: Project Lex
 

Lets see what that BW turbo is made of!! 40psi!!

Glad to hear its coming together for you.

Re: Project Lex
 

17psi with 500whp should be fun! 3.0 ftw :)

Re: Project Lex
 

Fingers crossed.

Re: Project Lex
 

Jax likes 2JZ engines, I need some more in my life.

Good luck man, if you wanna try it on the street maybe friday or sat. night, hit me up I can drive or hold a laptop pretty damn good...

Re: Project Lex
 

RavenWorks dyno session today went extremely well with Bob. 1st pull was on WG only boost (10psi creeping to 13psi). Pull was smooth, zero issues, and made 450hp/380tq. Over the course of the next 2hrs or so, we had it up to 20psi. We were trying to keep it at a decent yet conservative boost level, and same conservative mindset for the tune, don't shoot for the moon. Ended up at 545hp/462tq @ 20psi (falling to 17psi by redline). Full boost around 4300rpm, rev'd it out to 7600rpm (again, conservative redline). These are heart breaker SuperFlow numbers (probably closer to 575 on a DynoJet). Also the WB reading were off by about .5-.6, we were actually right around 12.1. Extremely happy with the results. Car never skipped a beat the entire time, ran absolutely flawlessly. That's plenty for me to have fun with this season, so just leaving it at that. Next year if everything holds together, I'll go for more.

Huge thanks to Bob, he did a great job and was a pleasure dealing with him. Also props to Shane as he had the idle/drivability already dialed in so well we didn't touch it. Shane couldn't do WOT tunes because of issues, so that was the goal of this session. Lucky to have such great resources locally! Also might I add, the RavenWorks facility was in a class of its own, so clean and so much impressive machinery.


http://mitsustyle.com/forums/attachm...1&d=1432167600
http://mitsustyle.com/forums/attachm...1&d=1432167600
http://mitsustyle.com/forums/attachm...1&d=1432167600
http://mitsustyle.com/forums/attachm...1&d=1432167600


https://www.youtube.com/watch?v=nG1A...ature=youtu.be

http://www.youtube.com/watch?v=nG1AGj6fwc0&hd=1

Re: Project Lex
 

Delicious!! That's awesome, now all thats left is some 19z!

Re: Project Lex
 

Nice power and cool that its ready to go to enjoy the rest of the season

Re: Project Lex
 

How much do these cars weigh? Just curious, looks fun though, very nice.