Re: 2011 Sti Build ?
I like purple obviously. It looks really good with white also i think.
|
Re: 2011 Sti Build ?
1 Attachment(s)
Well heres how far the car has came engine is 99% complete just need engine mounts then i can drop it in the car. Real close to being done
|
Re: 2011 Sti Build ?
Little update. Planning on having the car uo and running next spring ready for next season. Ill be sending in the shortblock i have now to be sleeved and then back assembled. Didnt feel like pushing what i want to at that blcok as it is now
|
Re: 2011 Sti Build ?
1 Attachment(s)
Havnt updated the thread in awhile so here whats been going on the shortblock i built first got tore apart to send the case halves out to get closed. The new case halves just arrived today stg4 iag closed deck, pinned mains, oringed deck, 14mm headstuds etc.. Also have been gathering some other parts as in all my fuel stuff and some other little goodies. Shortblock is getting assembled next week and then possibly after i get the longblock together itll go in the car possibly. We will see.
|
Re: 2011 Sti Build
1 Attachment(s)
Time to get the shortblock assembled. Heres a list of whats in the new shortblock and whats done to it.
- Stg 4 Iag closed deck conversion - Pinned mains - O-ringed deck - Manley turbo tuff i-beam rods with arp 625 rod bolts - Manley turbo tuff extreme duty 99.75 pistons - King rod / main bearings - New oem 08+ Sti crank |
Re: 2011 Sti Build ?
1 Attachment(s)
Longblock is assembled completely and hopefully going in the car this weekend if not next weekend. Heres a pic of the shortblock assembled and showing the orings.
|
Re: 2011 Sti Build ?
Using copper head gasket?
|
Re: 2011 Sti Build ?
Quote:
|
Re: 2011 Sti Build ?
Quote:
An o-ring needs a maleable surface to press into. Which is a copper gasket. You may ruin the o-ring if you use an MLS and torque it down onto that o-ring. |
Re: 2011 Sti Build ?
Quote:
Alot of people run mls head gaskets with o rings and is accually recommended by some of the best subaru shops in the US |
Re: 2011 Sti Build ?
And any wire will cocentrate the clamp load making a better seal. Many people use a copper oring with an mls gasket so something deforms. The phusions are near because they have a gas filled wire already in them. The gas in the wire makes them compressible. If the head lifts the oring will be able to grow a bit and maintain seal.
|
Re: 2011 Sti Build ?
Just trying to help. Hope it works out for you. Not something I would do or suggest.
|
Re: 2011 Sti Build ?
Quote:
|
Re: 2011 Sti Build ?
1 Attachment(s)
Update on the Subaru, well the engine and everything is in. Waiting on a couple more small parts to come this week then it will be time to start. More updates to come after breakin.
|
Re: 2011 Sti Build ?
1 Attachment(s)
Started the car for the first time in 2 years and it was definitely a relief. Its 100% done and ready to rock we get it on the rollers this coming Thursday.
|
Re: 2011 Sti Build ?
Hell yea! Good luck on the dyno!
|
Re: 2011 Sti Build ?
1 Attachment(s)
Little update now since the car has been running. Put up on the dyno and we maxed out my single walbro 450 intank pump. Car put out just shy of 600 whp at 485 tq. The car is no were near its full potential at this power level but just cant push it more with my fuel setup. This winter i plan on adding a surge tank along with dss axles all around with a triple disk clutch. Then we should be able to make some real power.
|
Re: 2011 Sti Build ?
Ringlands in tact....tranny is holding up... Id call that some good streetable power...but if ya want more keep gunning!
David, |
Re: 2011 Sti Build ?
Can confirm car spools very well, with insane transient response. Lol awesome sounds too.
|
Re: 2011 Sti Build ?
Damn good power! Nicely done, what are you going to push it to with a new pump?
|
Re: 2011 Sti Build ?
Dont have to worry about ringlands with a built motor lol but yes still intact. These 6 speeds in the stis are bulletproof. With the new fuel setup id like to just max out the 6062. Car is really fun on the street and hit full boost by 4500 rpm. Cant beat that.
|
Re: 2011 Sti Build ?
1 Attachment(s)
Havnt updated for awhile so heres a little news. Car has been running amazing with no problems and i cant say how happy i am to be able to say that lol. Made it to pg2 a couple weeks ago and got to see what it could do in the 1/4 or atleast what i can do with it. Fastest time i got was a 11.3 at 128 with not to hard of launching. Looking forward to making more passes by the end of the season with a goal to get a 10sec pass.
|
Re: 2011 Sti Build ?
Congrats!
|
Re: 2011 Sti Build ?
1 Attachment(s)
New seats finally arrived. Getting ready to be installed and also getting the car prepped for Rock Falls Oct 22.
|
Re: 2011 Sti Build ?
Nice! Those are actually pretty comfy with the padding
|
Re: 2011 Sti Build ?
Quote:
|
Re: 2011 Sti Build ?
Hell yeah hope your going to try and win some money at Rock Falls on the 22nd!!!!!!
|
Re: 2011 Sti Build ?
Quote:
|
Re: 2011 Sti Build ?
2 Attachment(s)
Well Rock Falls did not go as planned they didnt start running cars till about 3ish in the afternoon because of a wet track. They got one lane open and thats what we ran all day got 2 runs in with the first one being 11.5 @137mph then the second run 11.0 @135mph. 60' were terrible and not my best thats for sure, trap speed is there just need some work on getting my launches down.
|
Re: 2011 Sti Build ?
Wow 137 is moving good. And half second quicker at 135, lots of time left on the table. Very fast car for sure! Good luck next season, or this season if you’re lucky on weather I guess. Congrats!
|
Re: 2011 Sti Build ?
Thank you its not the 10 i wanted to end the season with, but ill take it i guess for it being only my second time at the track ever. Im calling it a season and car is going to be put away and start a small teardown for a couple upgrades then looking to come out swinging next year. Goal next year is to get in the 9s so i have some work to do !!
|
Re: 2011 Sti Build ?
1 Attachment(s)
Reversed intake manifold and also getting a bunch of stuff fabbed up. 2018 prep is in full force
|
Re: 2011 Sti Build ?
1 Attachment(s)
Had to give the girl some sunlight today since I had to roll it out of the garage to start assembling the gf dsm. Got my small brake kit installed also. Summer cant come soon enough im sick of this cold already
|
Re: 2011 Sti Build ?
Did you move?
What upgrades are you doing for 2018? |
Re: 2011 Sti Build ?
Quote:
|
Re: 2011 Sti Build ?
Car is looking really nice and that is a nice list of mods for the winter you wanna do. Turning it into a pretty serious race car!
|
Re: 2011 Sti Build ?
Quote:
|
Re: 2011 Sti Build ?
Car looks great! Love to see fellow engine builders doing work.
|
Re: 2011 Sti Build ?
Quote:
|
All times are GMT -5. The time now is 01:53 PM. |
Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.