can anyone here tig weld an fittings to valve covers
 

looking for someone who is reliable at tig welding as it's time to put some 10 an fittings on my valve cover for a catch can setup... pm me

Re: can anyone here tig weld an fittings to valve covers
 

Pushit2.0, JET, or one of our sponsors should be able to get you taken care of.

Re: can anyone here tig weld an fittings to valve covers
 

I had Danny at DB weld mine on.

Re: can anyone here tig weld an fittings to valve covers
 

My TIG is down for 6-8 weeks while redoing my basement/shop.

Re: can anyone here tig weld an fittings to valve covers
 

thanks jet...pushit2.0 did get to me though and said he can handle it, but the only thing I am worried about is getting every metal shaving out from behind the baffles, so I am waiting for a response on how that is remedied

Re: can anyone here tig weld an fittings to valve covers
 

Buy some weld in baffles, that is what I did.

Re: can anyone here tig weld an fittings to valve covers
 

Parts washer and air gun will get them out.

Re: can anyone here tig weld an fittings to valve covers
 

Id do that, there was a guy on the dsmlink forums taht was selling the weld in baffles.

When I did mine I drilled my own holes and ended up just not rocking a baffle as I didn't want to miss a piece.

Re: can anyone here tig weld an fittings to valve covers
 

anyone remember the guy on tuners?
also not rocking baffles sounds messy

Re: can anyone here tig weld an fittings to valve covers
 

i just spend an hour or so washing mine with dawn dish soap few cans of brake cleaner....flushed it with warm water and it was good to go. Oil change soon after ...no spun rods yet :)

Re: can anyone here tig weld an fittings to valve covers
 

I'd be worried about spinning bearings.

Re: can anyone here tig weld an fittings to valve covers
 

lol me too...