wtb. pistons, head
 

Picked up another dsm 93 laser, head crashed so I need pistons and a cylinder head for sure. Let me know what u got.

Re: wtb. pistons, head
 

I've got a set of new 1G pistons, rings and rods with less than 20 miles on them. I'm not 100% sure that the caps didn't get mixed between the rods since they came from a parts car that spun the bearings in that amount of time. I'd have them mic'd to make sure and possible resized, which should be pretty cheap. Make an offer. I might have a head as well, I have about 6 of them laying around.

Re: wtb. pistons, head
 

I've got a set of used standard bore 7 bolt Wiseco pistons, I will let them go for cheap :)

tRe: wtb. pistons, head
 

What's cheap ? :)

Re: wtb. pistons, head
 

haha make an offer sir, you will need new rings as well.

Re: wtb. pistons, head
 

I got a set uf .20 over 2g pistons with 1g rods. if interested just make me an offer.

Re: wtb. pistons, head
 

Can I use a 6 bolt head on this hog ?

Re: wtb. pistons, head
 

That's what it came with. The heads are 1G and 2G, the blocks and 6-bolt and 7-bolt. :D

Re: wtb. pistons, head
 

so anything from a first gen is fine:Banane55:

Re: wtb. pistons, head
 

You can actually use a 2G head as well, you just have to drill out the head bolt holes and you need a corresponding intake manifold. Easier to just use a 1G head.