Rb25det S14 gauge cluster pinout/ no start issue
 

Hello, Ran into an issue that has caused me to need the pinout on the gauge cluster. My Nissan 240sx has an rb25det swap and i need to get it running again. Long story short i may have ran a 12v wire to one of the back of the connectors. it was a red/yellow (looks like just red) wire in the picture below, i put it to that terminal, it cut out, so i pulled it right away, then it hesitated for a second, ran for another 5 seconds, then quit on its own, and now the car wont start. it has fuel going to it. it has no spark, I'm really hoping for a cluster pinout. But, ANY help will be GREATLY appreciated! im ripping my hair out trying to figure it out!!

Thanks!!

Jvo

Re: Rb25det S14 gauge cluster pinout/ no start issue
 

Well I believe I figured out the problem. When I put the positive wire to that terminal, I grounded/shorted the ecu. Destroying the ecu. Live and learn.

Re: Rb25det S14 gauge cluster pinout/ no start issue
 

Do you know Audi? We just found a kid with a RB25 ecu.

Re: Rb25det S14 gauge cluster pinout/ no start issue
 

Actually yeah I found him before I checked back here! And I bought his ecu and it all works great now!! And Audi really knows his stuff! I'm actually going to have him run through my entire car and let me know what he thinks. Thanks though!!