1g auto starter noise
i swapped out a motor with bad compression and put everything back in and now i have a crazy noise when i start it. everything i needed came off the old engine and i put onto new 6 bolt. have tried 2 differernt starters with same results.
any ideas? here is a video of noise http://youtu.be/SFQgSs40YVU |
Re: 1g auto starter noise
Sounds like it has 1 working piston
|
Re: 1g auto starter noise
Motor is fine. Starter noise is what I'm refering to
|
Re: 1g auto starter noise
Maybe ring gear on the flywheel is chewed up?
|
Re: 1g auto starter noise
Would think but we pulled trans ans switched torque converters to a nice clean one
|
Re: 1g auto starter noise
So it's an auto transmission? Did the flex plate ring gear look good where the starter turns it? Maybe the inspection shield is rubbing on the flex plate? Or maybe you forget to tighten down a torque converter bolt? Kind of hard to tell where the sound is coming from in the video.
|
Re: 1g auto starter noise
Did you reuse the auto starter plate if it was a 5 speed engine.
|
Re: 1g auto starter noise
Auto trans. Same starter plate was used, swapped all parts over
|
All times are GMT -5. The time now is 05:44 PM. |
Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.