Re: From ashes
Quote:
|
Re: From ashes
Quote:
"As a specific example, Injector Dynamics uses the same Bosch injector body as the starting point for their ID850 fuel injector. A key difference here is that the ID850 flows about 12g/s (98 lb/hr) at 4 bar, so we’re looking a a huge step away from the stock flow rate with more than double the flow capacity. It would stand to reason that such a drastic modification would yield even worse results than the mildly modified samples we saw earlier if one were not careful. This is where it gets interesting. Injector Dynamics not only provides accurate, complete characterization data for all of their parts (http://www.injectordynamics.com/ApplicationData.html ), but the parts themselves are more consistent than other redrilled examples." |
Re: From ashes
Quote:
|
Re: From ashes
OEM parts ordered;
1 Oil Pan 1 Oil Pump 1 Oil Squirter 1 Banjo Bolt 2 Intake Valves 2 Exhaust Valves 1 Complete Gasket Set All parts ordered, now I just have to wait. |
Re: From ashes
Looks like a solid build. The waiting is the worst part lil
|
Re: From ashes
Maybe I missed it, but what turbo are you going with?
|
Re: From ashes
MAP EF3. It's on its way from MAP to Ron's place right now. Next week the chassis will be leaving my mom's spare garage, back to the shop for humpty dumpty to be put back together.
|
Re: From ashes
Cool. That's a nice turbo for a built engine.
|
Re: From ashes
nice.
|
Re: From ashes
http://imageshack.us/a/img809/8505/imag0257fj.jpg
Going back to Ron's for assembly |
Re: From ashes
Glad you're making progress with this! Think it'll be 100% ready for the spring cruise?
|
Re: From ashes
What's the eta of it being done? Getting excited now?
|
Re: From ashes
It'll be ready sometime next week hopefully. Ron's gotta figure out his schedule and then I'm going to take the day off for dyno and raping the remaining 4mm of tread on the tires :)
|
Re: From ashes
that's awesome man I know all too well what it's like to have your car down and the wait involved the great thing is by the time you get it back up and running it's like having a new car all over again!
|
Re: From ashes
Quote:
|
Re: From ashes
I'm sure Ron is planning to break it in on the dyno. I'd honestly be more concerned about clutch break-in.
|
Re: From ashes
idk, depends on how he wants to do it I suppose. Tim just had his car built pretty similar (Built motor, EF turbo, new clutch, etc) and he gave him a break in tune and told him to put some miles on it before they tuned for any real power. That would seem to be a good idea on this car.
|
Re: From ashes
Ron was talking about that today. He said Tim's only driven about 900 miles on this tune. I drive a little more than that in a month. Less so now because I have a beater and still running on summers. But even with that said, I could easily have 1000 miles on it before April.
|
Re: From ashes
By "break in" are people here referring to initial ring seal, or a prolonged period of lighter use to discover other anomalies, before turning up the burner?
I can never tell on web forums. |
Re: From ashes
I would think the latter.
|
All times are GMT -5. The time now is 04:00 AM. |
Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.