MitsuStyle - SE take two! Err, make that three!

MitsuStyle (http://www.mitsustyle.com/forums/index.php)

- Project Talk (http://www.mitsustyle.com/forums/forumdisplay.php?f=5)

- - SE take two! Err, make that three! (http://www.mitsustyle.com/forums/showthread.php?t=29098)

SE take two! Err, make that three!

Well where do I start lets see late last summer after finally getting my car running well on e85 went to over to Kracka house for some cold drinks. Took the car out for a spin one hard pull then a 1/2 throttle onramp and boom! Mods at that time were TB exhaust FP 4R cams intake and manual boost at 34psi...Fast forward to recently to start the rebirth.

New parts
Map 2.3L stage 2 BS removal 10.5:1 CR
Map stage 3 head
milspec intake manifold+65mm TB
Megan O2 housing SPCoatings
Scheides old ex manifold SPCoatings
Map EF3 turbo stock compressor cover,PPI ported,SPCoatings
DW fuel pump+1450's
Cobb downpipe
Map beehive springs
PPI upper IC pipe
Works flywheel + CM FX400+Rosie clutch stop
MAP HP wastegate actuator

Re: SE take two!

Quote:

Originally Posted by goodhart (Post 374878)

Pics!!!

Doing it now patience!!!!

Re: SE take two!

whats with the pictures of Cher?

Re: SE take two!

ouch. that really sucks about your transfer case...

Re: SE take two!

Quote:

Originally Posted by tpunx99GSX (Post 374881)

whats with the pictures of Cher?

??? Thats my son inside the engine bay....

Re: SE take two!

Quote:

Originally Posted by goodhart (Post 374883)

ouch. that really sucks about your transfer case...

Hopefully no internal damage and just replace the cover

Re: SE take two!

Notice the see thru block option I had installed

Re: SE take two!

Now we just need to pull the head and see if any carnage occurred there too (hopefully not, the spark plugs all came out undamaged). We should have that done this week sometime, then it'll just be preparing until the new engine arrives!

Re: SE take two!

That 10:1 motor is gonna be awesome.
Are you gonna take the T-case apart and inspect it for pieces of metal?

Good luck. I was gonna say aren't you guys cold in jeans and a t-shirt? lol.

Re: SE take two!

Quote:

Originally Posted by turbotalon1g (Post 374889)

I was gonna say aren't you guys cold in jeans and a t-shirt? lol.

70's :)

Re: SE take two!

I like the pic with Kracka just sitting on the ground.

Re: SE take two!

Laramie has blood on his wrist! Done like true men. Holy EFF that is a lot of carnage! AWESOME pics. Thanks for sharing...keep us up to date on the schedule!

Re: SE take two!

Laramie was man-handling stuff like crazy! Real mechanic FTW.

Re: SE take two!

Quote:

Originally Posted by tpunx99GSX (Post 374881)

whats with the pictures of Cher?

Ouch! :nod:

Re: SE take two!

Quote:

Originally Posted by PlanoEvo (Post 374885)

Hopefully no internal damage and just replace the cover

Looks like TRE may have what you need: http://www.teamrip.com/garage.html

Re: SE take two!

Quote:

Originally Posted by cmspaz (Post 374906)

I like the pic with Kracka just sitting on the ground.

And wearing perfectly clean white T-Shirt???

Re: SE take two!

Holy pewp!

Good to see your plans, sounds like it should be a sweet machine.

Re: SE take two!

Quote:

Originally Posted by goodhart (Post 375185)

Looks like TRE may have what you need: http://www.teamrip.com/garage.html

shep hooked me up 60.95 shipped but thanks

Re: SE take two!

Quote:

Originally Posted by Halon (Post 375192)

And wearing perfectly clean white T-Shirt???

LOL the afternoon was still young at that point! The clothes are still in a pile in my closet, but here's how they were when I got home:

http://www.dsmstyle.com/photopost/da...0302011833.jpg

Re: SE take two!

LOL only Hughes would verify that his clothes got dirty with a picture. Epic!

Re: SE take two!

Andrew got the head off last night...just waiting for him to post pics. Sounds like the valves did collide with the pistons but I'm hoping the damage is minimal.

Re: SE take two!

lucky, looks like he just bent a couple valves eh?

Re: SE take two!

Whoa what the heck happened in #2? lol Let me know if you need to send the head our way sir, we got your core block yesterday and everything looks great in that regard :)

Re: SE take two!

I was gonna ask the same thing. It looks like the piston is rotated.

Re: SE take two!

Quote:

Originally Posted by v8klla (Post 375367)

Whoa what the heck happened in #2? lol Let me know if you need to send the head our way sir, we got your core block yesterday and everything looks great in that regard :)

If needed, what sort of shipping arrangements can me made for the head? Do you use special boxes or totes?

Re: SE take two!

Ha, crooked piston ftw!

Re: SE take two!

That's the cylinder that the rod let go so the piston was able to turn what ever way it wanted not being held by the rod any more.

Re: SE take two!

Quote:

Originally Posted by Kracka (Post 375376)

If needed, what sort of shipping arrangements can me made for the head? Do you use special boxes or totes?

For engine yes, heads no. We can certainly get him a label or schedule a pickup if need be.

Re: SE take two!

Quote:

Originally Posted by v8klla (Post 375479)

For engine yes, heads no. We can certainly get him a label or schedule a pickup if need be.

Mind getting us a rough estimated cost to ship assuming he boxes it up and drops it off at a FedEx location? That Stage 3 portwork looks like it would be a great match for his setup.

Re: SE take two!

In for results :)

Should be pretty sweet when all is said and done!

Re: SE take two!

I love my Stage 3 ported head!

Re: SE take two!

Quote:

Originally Posted by Kracka (Post 375481)

Mind getting us a rough estimated cost to ship assuming he boxes it up and drops it off at a FedEx location? That Stage 3 portwork looks like it would be a great match for his setup.

$32 to ship.

Re: SE take two!

Quote:

Originally Posted by v8klla (Post 375501)

$32 to ship.

Oh that's no where near as bad as I thought it would be! Your FedEx business account FTW :D

Re: SE take two!

Quote:

Originally Posted by Kracka (Post 375517)

Oh that's no where near as bad as I thought it would be! Your FedEx business account FTW :D

Yes most badass!

Re: SE take two!

http://a8.sphotos.ak.fbcdn.net/hphot..._3888968_n.jpg

Got it taken apart then put back together...transfer case is ready to rock! We also got the head disassembled, boxed up, and on it's way to MAP for rebuild/porting.

Re: SE take two!