Re: MAP's 2008 Evolution X GSR Build Thread aka Project GGX
Quote:
|
Re: MAP's 2008 Evolution X GSR Build Thread aka Project GGX
ehhh
|
Re: MAP's 2008 Evolution X GSR Build Thread aka Project GGX
Haha we'll see, my biggest issue is going to be remaining content with EF4 power levels when the Evo X HP record is a mere 872whp ;)
|
Re: MAP's 2008 Evolution X GSR Build Thread aka Project GGX
You have an EF4 now?
|
Re: MAP's 2008 Evolution X GSR Build Thread aka Project GGX
Not yet, soon.
|
Re: MAP's 2008 Evolution X GSR Build Thread aka Project GGX
6466 time...do it.
You mind as well have the record right :) Put it on the MAP t3 kit, done and done! The only fun part will be fueling. |
Re: MAP's 2008 Evolution X GSR Build Thread aka Project GGX
6466? Pshh if ur gonna go for the record, go big or go home...
|
Re: MAP's 2008 Evolution X GSR Build Thread aka Project GGX
6466 isn't big? From what I have seen the spool is better than the 6765 and makes similar power. I am guessing if you max the turbo the 6765 (well now probably 6766) will make more but he doesn't need to max it to break the record :)
|
Re: MAP's 2008 Evolution X GSR Build Thread aka Project GGX
Looks good, I've always liked the stockish look with a good set of wheels and tires. :D
|
Re: MAP's 2008 Evolution X GSR Build Thread aka Project GGX
Very impressive. I can't wait to get up there to see this car in person. We did an X similar to this, E85, FP Black (which Brian from FP gave us to guinea pig but left a washer in the compressor housing so the turbo didn't spin at all), and at 28lbs. I was a bit nervous for the customer but it held up fine. Very impressed with the responsiveness.
|
Re: MAP's 2008 Evolution X GSR Build Thread aka Project GGX
You will be content with EF4. ;)
|
Re: MAP's 2008 Evolution X GSR Build Thread aka Project GGX
Quote:
|
Re: MAP's 2008 Evolution X GSR Build Thread aka Project GGX
Just build a nice fun street car like you already have, it's the 'right' thing to do! Have fun with it every day!
|
Re: MAP's 2008 Evolution X GSR Build Thread aka Project GGX
Quote:
shhhhh keep that on the downlow... :P |
Re: MAP's 2008 Evolution X GSR Build Thread aka Project GGX
|
Re: MAP's 2008 Evolution X GSR Build Thread aka Project GGX
Good Lord that looks good!
|
Re: MAP's 2008 Evolution X GSR Build Thread aka Project GGX
Wow that is hot. Hopefully it makes a few ponies for ya :D
|
Re: MAP's 2008 Evolution X GSR Build Thread aka Project GGX
That is hawt! I just got done porting my new head and it didn't turn out that nice. I'm curious about the dimples outboard of the valves, I take it that's factory on the X's for some reason?
|
Re: MAP's 2008 Evolution X GSR Build Thread aka Project GGX
Wondering if you have the numbers of what a stock head flows vs this ported one?
Can you do a overlay with the ported head with the graph and mods below? Quote:
|
Re: MAP's 2008 Evolution X GSR Build Thread aka Project GGX
Formatting sucks sorry, there is a better table here:
http://www.maperformance.com/map-sta...ox-chs-s5.html Stock Cylinder Head Lift (Intake) .100" .200" .300" .400" .450" Lift (Exhaust) .100" .200" .300" .400" .450" %flow .291 .585 .800 .910 .940 %flow .221 .555 .637 .662 .669 CFM 85.27 170.50 234.50 267.00 276.50 CFM 69.24 174.15 199.85 207.70 210.10 MAP Stage 5 Cylinder Head Lift (Intake) .100" .200" .300" .400" .450" Lift (Exhaust) .100" .200" .300" .400" .450" %flow .308 .615 .870 .660 .690 %flow .231 .592 .783 .803 .806 CFM 90.10 180.50 254.00 290.50 302.00 CFM 72.54 185.90 245.90 252.00 253.10 I'm afraid I won't be able to do a back to back as I'm building the bottom end at the same time plus a few other goodies :) |
All times are GMT -5. The time now is 09:22 PM. |
Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.