1991 AWD Talon
 

Update: Car is being parted out.

We just had our first child and I need to simplify my life a bit (snowmobiling and motocross sure as heck aren't going anywhere). Sadly, this means my baby panda has to go.
My brother bought the car out in AZ around 10 years ago and went through the entire engine bay before I drove it back to MN (and then CA, and then MN again). The paint is original (130k miles) and could definitely use a new coat, but there are only a couple minor scratches / dents and ZERO rust -car saw ONE MN winter in its entire life. Obviously, I'd love to sell the car whole, but that never works ;-) HOWEVER, I'll post it up for sale and sit on it for a weekish before selling individual parts. I'd like to get $6700.

https://picasaweb.google.com/lh/phot...eat=directlink
https://picasaweb.google.com/lh/phot...eat=directlink
https://picasaweb.google.com/lh/phot...eat=directlink

The car went from stock 10 years ago to the current set up running ~55 lbs / min for the last 3 years (max 10k miles on all aftermarket parts):

Extrude honed head with 1mm oversized valves
Extrude honed intake mani

FP 3052, 2.5" FP O2 housing, tial gate, FP intake, AN coolant lines, FP oil lines & filter, custom downpipe with married dump. Turbo is going in for a rebuild before any sale.

Large SBR race FMIC with short route piping all powder coated black. I have an extra UICP in order to run the Tial, Greddy, or stock bov.

Purple tial bov, Greddy type RS, Greddy type S, and stock 1g bov

AEM methanol injection at throttle body elbow (post IAT)

Speed density set up for link (IAT and MAP)

GM MAF and cable for Link

VDO boost, EGT, and oil pressure gauges (generic vacuum gauge as well)

stock 6 bolt short block SOLD

Shell, K-sport coilovers set up by Muellerized with front and rear shock tower bars, Stock trans, 4-bolt rear, 2 transfer cases, ACT 2600 clutch, ACT flywheel, and taboo clutch fork, 3 inch exhaust, spare drive shaft ALL SOLD

PLX wideband SOLD

HKS turbo timerSOLD

ECMlink V3 and cablepending

Sparco seats with corbeau 5 pt cam lock harnesses SOLD

255 lph pump with swagelok lines & filter to the rail SOLD

Aeromotive FPR, 1000cc injectors SOLD

Drag DR-31 17X8 +35 wheels wrapped in Azenis -There is a full size matching spare just in case it needs to fit over the stoptechs ;-) -SOLD

Stoptech front brake kit with slotted rear rotors and R4S pads (I have to double check that) -stainless lines everywhere -SOLD

Mishimoto radiator SOLD

Feel free to email joel_817yz(AT)yahoo.com

Re: 1991 AWD Talon
 

That is a beautiful 1g. If it ends up getting parted there are a few things I'd be interested in. Hopefully it doesn't have to come to that and goes to a good home.

Re: 1991 AWD Talon
 

I'm interested in turbo and brakes and seats.

Re: 1991 AWD Talon
 

I appreciate the kind words! I've had this car for a long time and had a blast watching the transformation into a beast! I wish it would go to a good home, but I doubt it will happen.

Re: 1991 AWD Talon
 

Ok. I will try to get the turbo sent out this week. Are you interested in spending more $$ to get an HTA wheel since its there?

Re: 1991 AWD Talon
 

^I'd have to know a price before deciding that and I'll need info on the brakes.

Re: 1991 AWD Talon
 

I'd be interested in the seats, harnesses, and fmic if you sell them separately.

Re: 1991 AWD Talon
 

Updated original post -car is being parted out and for sale items updated.
Thanks for overwhelming me with PM's, texts, and emails!

Re: 1991 AWD Talon
 

How much for radiator?

Re: 1991 AWD Talon
 

PM'ed

Re: 1991 AWD Talon
 

Updated again -items sold and re-listed.

Re: 1991 AWD Talon
 

Split a few things up and added the turbo timer

Re: 1991 AWD Talon
 

Buyer backed out for the shell...

Re: 1991 AWD Talon
 

I'm curious on the PLX; what're you asking?

Re: 1991 AWD Talon
 

PMed

Re: 1991 AWD Talon
 

whats going to be left on the car? pm me some details. im interested even if just a rolling chassis

Re: 1991 AWD Talon
 

Updated

Re: 1991 AWD Talon
 

Interested in the stock 6 bolt short block, and the ecmlink. How much you want for them?

Re: 1991 AWD Talon
 

PM'ed

Re: 1991 AWD Talon
 

Updated