Shells, engines, transmission, and bolt-ons...
4 Attachment(s)
Please call or text for any inquiries!
Thanks -Matt 218-461-5023 Located in Duluth, MN if anyone wants to come up shopping. |
Re: Shells, engines, transmission, and bolt-ons...
Moving all my DSM inventory I’ve been hoarding for the last 10 years.
Valve covers (Pictures Attached) $90 *$75 with cracked spark plug cover bolt holes Used transfer case $100 freshly powder coated black chrome 1G fuel rail $15 New CXRacing same side intercooler (Pictures Attached) $70 Spearco 221 intercooler (Pictures Attached) $70 Shells: *These will be pulled out of storage early summer and pictures added Clean white 98 awd converted with brand new rear subframe fully sound deadened interior Red 95 awd lowered needs engine and transmission Rusty 97 Black awd shell Drivetrain: Half a dozen 1g awd transmissions in various states Quite a few various transfer cases A few 2g awd transmissions I have a couple 2g rear diffs too Fuel system: A couple sets of injectors mostly mid sized fic Engine: 2.4l eagle wiseco both torn down and honed crank polished (Pictures Attached) A couple 2.0l 6 bolt short blocks A few sets of cams Evo behive springs and retainers Good used ARP headstuds (missing some nuts and washers) Several new sets of EngnBldr 3G lifters New OEM rocker arms After markets springs and stainless valves Several 2g and 1g heads Several radiators stock and aluminum 1g and 2g I will be updating this with more specifics and pictures as I go through my garages. I have most things you could think of to complete a few fully built cars. Located in Duluth, MN if anyone wants to come check out in person. Prices are plus shipping and fees unless otherwise agreed upon. ALL ITEMS ARE NEGOTIABLE! Thanks -Matt Texting works best! Call/Text: 218-461-5023 SOLD: New FP V1 68HTA 2X DSMLink V3 Full DSMLink V3 Lite Used FP3 cams Used SuperTech Dual seats/springs/retainers New SuperTech low profile valve seals New EngnBldr 3G Lifters 2G Brembo Bolt-Up front knuckles with ABS Sensors 2G FMIC Delta Core, Stainless J-Pipe, Aluminum upper/lower, Tial BOV, silicone coupler/t-bolts Used Good MHI small 16g Uncracked 1G Valve Cover Used Gold Fuel Lab Filter and Regulator kit w/ black lines 2G Jacks Ultimate Synchro transmission New 2G SPC Adjustable Upper Control Arms New black Fidanza cam gears New Crower Springs and Titanium Retainers Used silver Fidanza cam gears Silver Fidanza cam gears New Crower Valve Springs and Ti Retainers New SuperTech valve guides Used Crane Cams 43-0012 1X G4CS Machined Block/Crank Wiseco Piston/Eagle Rod New ACL race main and rod bearings New Wiseco Piston rings New Kiggly main girdle New ARP main studs New 6-Bolt AWD Fidanza Aluminum Flywheel Koni Yellow Eibach Pro-Kit Assembled <1K Miles MHI 20G with FP 8CM DSM Turbine Housing <1K Miles 2G Ported/Polished Machined Head Assembled w/ New Supertech Valves, seals, and Dual-Springs 2G AWD 3” stainless turbo back exhaust AEM Electronic Wideband AEM Electronic Boost Gauge (50psi) 2G dual pod gauge cluster bezel 2G Thermostat Housing 2G Power Steering Bracket 2GB CAS DG Coil Over spring rates 700/350 brand new New FP3 Cams 98 spyder completely gutted awd swapped at some point 99 Spyder GST silver w/ black leather |
Re: Shells, engines, transmission, and bolt-ons...
Updated.
|
Re: Shells, engines, transmission, and bolt-ons...
Updated.
|
Re: Shells, engines, transmission, and bolt-ons...
Prices Lowered.
Please text message if possible for more info/pictures! Thanks |
Re: Shells, engines, transmission, and bolt-ons...
Prices Lowered.
|
Re: Shells, engines, transmission, and bolt-ons...
Prices Lowered.
|
Re: Shells, engines, transmission, and bolt-ons...
Prices Lowered.
|
Re: Shells, engines, transmission, and bolt-ons...
what head is on that longblock?
|
Re: Shells, engines, transmission, and bolt-ons...
It is a 1G head.
|
Re: Shells, engines, transmission, and bolt-ons...
Updated.
|
Re: Shells, engines, transmission, and bolt-ons...
Prices Lowered.
|
Re: Shells, engines, transmission, and bolt-ons...
Prices Lowered.
|
Re: Shells, engines, transmission, and bolt-ons...
6 Attachment(s)
Anyone interested in this 98 Spyder shell?
Pretty clean builder, I have tons of parts that could be bundled with it... |
Re: Shells, engines, transmission, and bolt-ons...
Any 2gb GST trans?
|
Re: Shells, engines, transmission, and bolt-ons...
No sorry. But I am probably going to scrap the spyder shell if no one wants it soon. I have plenty of other parts that could go with it, including top if there’s interest.
|
All times are GMT -5. The time now is 10:21 PM. |
Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.