Re: Project Lex
 

That's fuxking pimp.

Re: Project Lex
 

Thoughts on flipping that front panel upside-down to draw air out of the engine bay rather than push air in?

Re: Project Lex
 

Ridin dirty!

Re: Project Lex
 

OMG do I really need to explain irrelevant things about my photos? I thought we were beyond that now a days.

- I used 2 jack stands. I removed the passenger side one, I moved the jack over to remove the driver side (you can even see the jack is over there). Realized 'oh lemme grab a photo quick'. Took said photo, then lowered / removed the other side.

Re: Project Lex
 

Sorry man, didn't mean to hijack. Just thought it was funny.

I had the same thought (mine has the vent blades facing down and back to draw air out of the engine bay). Not sure how far those blades would stick down though. Plus it might not be symmetrical?

Regardless, undertrays make a big difference, looks like a nice piece!

Re: Project Lex
 

Interwebs is serious business. It's not acceptable for you to post a pic like that without captions explaining yourself. How dare you!

Re: Project Lex
 

lol just looked a bit hairy! You get so riled up hahah

Re: Project Lex
 

I could flip it over, I think it is symmetrical. I assume he meant for it to be this way because it's the side his logo is on. I did a quick look at the other company that makes one, and their's appears to be similar in nature. These are the two options for this car basically.

http://lrbspeed.com/wp-content/uploa...2/DSCN6724.jpg


Here's a picture of the oem one I think (i never had one since I've owned the car).

https://picclick.com/92-00-LEXUS-SC3...l#&gid=1&pid=1

To be honest I got it mainly to just cover up the bottom so things don't fly up in the engine area, and just protect in general. And also contain any minor leaks and what not. I didn't really get it for any sort of airflow/cooling reasons. If I could have gotten it with no louvers I probably would have gotten that actually. So the actual louver design doesn't mean a whole lot to me. But I do see what you mean. It'd make more sense for them to be sticking outward instead of inward. Doesn't even seem like they do much going inward other than maybe allowing a small amount of air in.

Re: Project Lex
 

I'd set them up the same orientation as stock to keep the airflow factory-ish. Having a hard time figuring out the OEM tray airflow path, seems to look different depending on the pic!

Re: Project Lex
 

Dyno today at DB made 812/737. Not too shabby! Dyno graph comparing last year to this year. More power everywhere!

https://www.youtube.com/watch?v=7Xv7XPYQed4

http://www.youtube.com/watch?v=7Xv7XPYQed4&hd=1

http://www.dsmstyle.com/photopost/da...80188160_n.jpg

Re: Project Lex
 

Very Nice!

Re: Project Lex
 

Car makes way more power across the board, is that because of the new engine or was boost being limited before up top? Looks like it used to spike a bit then taper down with the old motor.

Nice job! Good luck at PG2!

Re: Project Lex
 

Can't see the graph at work, but i'm very happy for you man. That is sick.
800whp and AC, way better than sweating balls in a DSM.

Re: Project Lex
 

Yeah there's something wrong with this site where you can't enlarge thumbnail attachments.

As for the improvements. Well the larger turbo is responsible for the added power.

The increased power band I think is a few things. I think first is the vvti, that is known to make a big difference, the number 500rpm is thrown around a bit and that's nearly exactly what the chart is showing. I think that is 90% responsible for it. Also the fact that this turbo is newer tech. When I bought it from Geoff at FR he said that it should spool similar as my old smaller turbo, even tho it's larger, and that is due to the better design of the SX-E. So that allowed for more power without sacraficing response. Lastly I'd say the head-work. The pocket port and cams I think make this new head flow much better, and that's why the car makes good power at similar boost levels as last year. Also the Manley springs/retainers allows for 8k redline where as the old setup I didn't feel comfortable over 7500.

Re: Project Lex
 

I logged in for the first time in about a year to say: Good fucking work!

Re: Project Lex
 

Very cool! Congrats. Who needs a mustang when you have a 2JZ

Re: Project Lex
 

ha thanks guys.

I do kinda need a mustang tho after talking with Danny lol.

Re: Project Lex
 

Congrats man! That’s some crazy power.

Re: Project Lex
 

Bring it out next weekend on a friday or saturday night to come play! & Show it off 800 wheel pftttt Mr.Jz.

Re: Project Lex
 

I just recently got gaped by mustang...from a roll, was pretty traumatic...ill catch him on dig run someday lol. It was a beautiful car. This forum seems to have more none mitsu action happening, its tempting to want to jump ship seeing all these great results.



http://www.dsmstyle.com/photopost/da...80188160_n.jpg[/QUOTE]

Why is the graph so jumpy towards the back half? Car sounds smooth and doesnt seem to be braking up...no spark blow out nothing hmmm