|
Re: Dave's Evo X Build
Quote:
|
Re: Dave's Evo X Build
I got sick of how lame the Evo is, how bad the gas mileage is, how expensive the maintenance is and how poor the quality of build is on a 35k car.
Traded it in for a boring vehicle today, way more solid. Now I have a bunch of money left over. http://i21.photobucket.com/albums/b2...26/photo15.jpg ;) |
Re: Dave's Evo X Build
I bet you fall in love with that 3 for a little bit
|
Re: Dave's Evo X Build
Quote:
All in all, this is a great loaner car to put around in, i like it a little:) Nice to have a normal car to cruise in every once in a while. |
Re: Dave's Evo X Build
UPDATE:
Got my car, fixed under warranty!!!! Sweet, i love it, Mits came through for me. Thank god there was a TSB, more money for mods now. However, I am slightly concerned, a had an engine code right when I got in it at idle. P0300 I think, it was a random misfire code. One mechanic there went for a test ride since they thought the timing might be off a tooth but its not that. So hopefully nothing is f'ed up, pulls nicely still. Side note, clutch seems to have gotten better! It is holding all gears with flying colors again, woo. |
Re: Dave's Evo X Build
Quote:
|
Re: Dave's Evo X Build
Quote:
I finally beat a crotch rocket this weekend in my car too;) It was close but I edged him out. Feels good to beat something on two wheels. |
Re: Dave's Evo X Build
fucking nice. I like beating bikes, hasn't happened for so long :o(.
Looks like you need to pick up my slack for a bit then, I'm sure you won't mind. (BTW I race every bike I can) |
Re: Dave's Evo X Build
What size 600?
|
Re: Dave's Evo X Build
Was hard to read it in my rear view.
It was a ducatti of some sort, didn't catch the size/model. From a roll essentially. |
Re: Dave's Evo X Build
Thats awesome! I took down a R6 and I was more than happy!
|
Re: Dave's Evo X Build
^That is still very solid, your car is a much better top end car than mine i am sure, being lighter and with the black. I bet once you get that thing e85'ed and fully tuned it will really rip:)
|
Re: Dave's Evo X Build
Badass! I hung with an R1 w/ passenger last year from 40-120 and was absolutely extatic!
Keep having fun with it, spring is here! |
Re: Dave's Evo X Build
Hope so! I want a ride in your car! Your coming to Scheides on Sunday right?
|
Re: Dave's Evo X Build
Quote:
What time is that at? I haven't even checked yet. |
Re: Dave's Evo X Build
Scheides said 9:30am
|
Re: Dave's Evo X Build
Ooo boy, gonna be hung over, that's ok. A few beers there should cure that:)
I'll bring some noob tools, can never have too many rachets. |
Re: Dave's Evo X Build
New parts!!!
Blouch wga, hopefully hold 30psi or so. http://i21.photobucket.com/albums/b2...6/d9a4bbff.jpg Omni 4bar for more boost potential. http://i21.photobucket.com/albums/b2...6/5f736116.jpg Dropping my car off at DB Tuesday night probably for clutch/flywheel and Clutch master cylinder upgrade. Then retune when the clutch is broken in, and I should have my new synapse bov then too. |
Re: Dave's Evo X Build
Awesome! Will get the new parts in on Sunday!
|
Re: Dave's Evo X Build
I am not sure if the MAP sensor has to be scaled or anything, so that might have to wait, not sure.
|
Re: Dave's Evo X Build
Quote:
I bought one as well. If Shane knows the table settings then that's something you could install in two minutes while the car is on the dyno. |
Re: Dave's Evo X Build
Quote:
I will wait for the dyno. Right now I am trying to figure out what to do about rims/tires. Can't decide between 18x9.5 and 18x10.5 +15. My Advans are no more, had them recycled yesterday, they wouldn't put them on by law, lol. I didn't think they were that bad. So I am accelerating my plans for rims/tires. Came at a good time though, refinanced my house, no mortgage this next month:) Any suggestions guys? I am planning on running the star specs in either 265 or 275/35 on the RPF1's in either gunmetal or silver haven't decided on color. Any help would be awesome. |
Re: Dave's Evo X Build
Well, the RPF1's don't come in +22 so you can't get fitment that doesn't require fender rolling. If you're going to roll anyway then you might as well go big, right? Obviously you're going to have worse tire wear from daily driving due to the additional camber that you'll have to run up front but I'm sure you knew that...
|
Re: Dave's Evo X Build
^I guess I didn't know that...sigh. Maybe i should just do the 10.5's...
I guess the big thing I worry about with that is extra rotating mass, will it be that big of a difference? The X is already a HOG. |
Re: Dave's Evo X Build
RPF1s DO come in +22, I have some. :) But they are 17x9... Also, RPF1s only come in silver, black, gold and chrome, so if you want a different color you'd have to get them painted.
In my opinion do whatever it takes to use the thinnest spacer in front, if you have to use a spacer at all. I have to use a 10mm spacer in front, added ARP long wheel studs and only had to roll the rear and I'm good. I know you guys have a lot more room to play with, but either way with that much tire I wouldn't think twice about rolling the fenders and just do it anyway. |
Re: Dave's Evo X Build
Quote:
http://forums.evolutionm.net/evox-sa...-shipping.html I have read to run the +15 offset, only the rear fenders need to be rolled. And then you need to do a pretty big alignment. I guess I have two questions...it looks like I will have to roll the rears regardless so is there any disadvantage to going with 10.5's? I love the way the look, all nice and meaty, but are they too big? Is the extra rotating mass a big deal? Secondly, where is a good place to have these mounted, installed and to do the fender rolling? Preferably someone that is a bigger shop so I can do it very soon. I don't want to burn up my expensive winter tires anymore than they already are. I might sell them soon too, to help pay for a winter beater. |
Re: Dave's Evo X Build
The RPF1's are very light so even in a large size it shouldn't matter. I think 10.5 is overkill for 275's but if you like the look then that's fine. I was intending to put 275's on my 9.5" rims.
Yeah, you're going to have to run major camber up front. -3 or more. I've heard that running anything over 275 turns the car into a boat on a road course. The Alignment Guy (one-person shop) and that expensive Porsche place are the only two that I've heard anything about. It's a great question because I'm going to need corner balancing and a real alignment as well. When I had my coils put on the alignment place was only willing to go -1.5 front and rear. Lame. |
Re: Dave's Evo X Build
Quote:
A wider wheel simply allows you to properly and safely have a wider tire. I'm running 255s on my 9" wheel, the sidewalls are pretty much flush, will try 265s next. 275 would be pushing it. People run 285s on 10-10.5" wide wheels all day. Bigger wheels and tires are heavier, nothing you can do about it other than get lightweight wheels like RPF1s and lighter tires. www.thealignmentguy.com - Look no further than Jeff, he is the man. He will align your car well and mount your tires for you for an extremely fair price. You WILL find yourself wanting to offer him more money than he asks for. Why are you going to have to run so much camber? |
Re: Dave's Evo X Build
Hmm...here is what i have been looking at, I really like the look. It's Buschurs car.http://www.evoxforums.com/forums/att...8&d=1211671015
I like the way it looks and seems to work well, it is the 275/35 tires and 18x10.5's. I think that is what I am going with. Probably with the gunmetal too, i like darker rims on red cars. What do you guys think for color? I have never seen the gunmetals on a red X or an X in general. |
Re: Dave's Evo X Build
Ok so again, lol, There is no reason not to go to the 10.5's since I am going to have to fender roll anyway?
Can jeff do fender rolling? And I mind as well do 285's then huh? |
Re: Dave's Evo X Build
Quote:
|
Re: Dave's Evo X Build
Nooo... I was going to get the gunmetals no fair !
|
Re: Dave's Evo X Build
I have the star specs in the standard size , these tires are very noisey, but they have crazy grip. If I were to do it again, I would jump on the Nitto NT05, Advan AD08, or Hankook RS3's. All these tires are full of Win! Star Specs really have the edge on price though.
|
Re: Dave's Evo X Build
LOL, sorry man. I was thinking the matte blacks, but those gunmetals are sexy.
Probably ordering them over lunch if the vendor gets back to me. |
Re: Dave's Evo X Build
Hmmm, maybe i will do the nt-05's.
One note, my exhaust is so damn loud i doubt i could hear anything. Are the nt-05's as good? Or worth the extra money? |
Re: Dave's Evo X Build
Quote:
|
Re: Dave's Evo X Build
Well with my setup i am sure i will be getting tires often, lol. So I will try the star specs first I guess thinking about it more. And I can't imagine hearing tires over my car.
|
Re: Dave's Evo X Build
Quote:
|
Re: Dave's Evo X Build
It is splitting hairs really at that point, I just have not heard as many complaints on noise on the nt05's as much as the star specs. I knew they were loud going in, I was more focused on the performance per dollar factor.
Can wait to see the gunmetal rfp1's, that is about the only color rim I like on silver other then black. They will look really good on red as well. |
Re: Dave's Evo X Build
NT05 is shaved? Are you talking about the NT05r? I am pretty sure you can get the NT05 in standard tread depth.
|
| All times are GMT -5. The time now is 11:35 PM. |
Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.