Left Over Parts
 

Hey style i have a few left over misc parts that could maybe do someone some good. This is kind of a name your own price deal...im just looking fair low ball offers ha! That would be appreciated since most of this stuff is just taking up space.

-1G, 2G and Evo 3 O2 Housings SOLD! (30BUX)

-14B Turbo with some shaft play with manifold (stocker unported)

-2 Sets of 3 Inch Turbo Back Exhaust Systems (Both Custom) One Comes With a 2.5inch downpipe into 3 inch. The other Is 2.5 for the first feet then 3 inch all the way single piece exhaust...i cut it in half for storage would need to be welded in the middle

- 280 BC Camms (found my long lost Big boy camms...dont havr a build head for tjem you might so buy them...

-Long 2G Throttle Body inlet un hacked

-Short Style 2 Throttle Body Inlet un hacked

-L7 10 Inch Kicker Sub with small amp can separate

-No name brand 10 inch speaker in box (makes a great foot stool...)

-3 Eprom ECU's

-14Inch radiator fan pretty much brand new ran a few times....cant fit both 12 and 14 inch fan therefore selling 14inch fan. SOLD (20BUX)

-Evo 8 Oil cooler with 3.5feet of ss lines and i believe -6 or 10 fittings its two sizes bigger then a 6 i forgot its pretty big though. Got fittings for both ends regular size banjo bolts for the DSM OFH and fittings for the Evo Cooler (recommend flushing it before use just to be save) Lines could be sold separate with the fittings. I was thinking of maybe getting them welded onto my valve cover. Multiple usage for the set up.

http://i736.photobucket.com/albums/x...85848-Copy.jpg

http://i736.photobucket.com/albums/x...85926-Copy.jpg

http://i736.photobucket.com/albums/x...90156-Copy.jpg

http://i736.photobucket.com/albums/x...709_090202.jpg

http://i736.photobucket.com/albums/x...90234-Copy.jpg

http://i736.photobucket.com/albums/x..._6222939_n.jpg

http://i736.photobucket.com/albums/x..._2224039_n.jpg

http://i736.photobucket.com/albums/x..._4335518_n.jpg

I can send pictures of specific items if need be as well but yeah name your own fair price....

Thanks,

Re: Left Over Parts
 

I need either the 2g o2 housing or the evo 3, whichever is in the best shape. Im creeping because of stock o2, time to upgrade. Also, will the 14" fan work with the stock 1g radiator, or is it too big?

Re: Left Over Parts
 

Should fit and both are in good shape one is just better then the other ...speaking evo 3 vs 2g just make an offer and u can test fit the fan :) I'm home after 9

Re: Left Over Parts
 

Text me, 612 876 8827.

Re: Left Over Parts
 

Thanks for the parts, hope I dont run out of wire on the fan tho. Dude must have been:beerfunnel2: when he cut the wires, lol

Re: Left Over Parts
 

^ Your welcome and just a little bit . . .but if you bench solder and heat shrink you should be fine thats what i did. Turns out few wires to the ecu are cooked and my ecu probably is to had to cancel my tune :(

Re: Left Over Parts
 

Thats what Im going to do. How did that happen? Do you already have link in your ecu? thats would not be good. but man im sorry to hear that. Hey what kind of problems am I gonna have to go through getting this evo housing on? I have 3" dp, and a stock o2 housing gasket.

Re: Left Over Parts
 

pb blast your bolts ahead of time....get gaskets and new bolts just incase...it might be faster to even pull the manifold instead of leaving it on.... reason the last 14mm bolt closest to the block in the middle is a pain! Unless u have goos tools...

Re: Left Over Parts
 

Are any of the eprom ecu's for a 2g?

Re: Left Over Parts
 

I notice two of the ECU's say 90 AWD on them, is the third a 91-94 by chance? How much?

Re: Left Over Parts
 

I'd have to double check ill post uo before bed...and oh man its a stocker no chip burned or anything so just make a decent offer I'm litterally liquidating :)

Re: Left Over Parts
 

Bump!

Re: Left Over Parts
 

Where are you located?

Re: Left Over Parts
 

Bloomington

Re: Left Over Parts
 

How much for the L7 and does it fit in the hatch with a decklid

Re: Left Over Parts
 

Never ran it with the lid but if laid glad yes it'll fit :) and literally make an offer :D I just reinstalled it in my civic so ya could even listen if ya wanna!

Re: Left Over Parts
 

Looking for a 91-94 ecu? Did you check to see if that was one? Also need a 91-94 harness

Re: Left Over Parts
 

Those ecus are none eprom people so screw that...I mean you can buy em but yeah none emprom...and I have no harness.

Re: Left Over Parts
 

Is it a 91-94 ecu?

Re: Left Over Parts
 

I PMed you, can you reply please?