MAP Event @ BIR: Results!
Got an update, wanted to post up what I know! Feel free to add as you want to!
Jim(TalonFiero) is running ~~11.4@123mph on his red (6-speed, so he's messing with grabbing 5th gear) http://www.evomn.net/forums/viewtopic.php?t=4015 Silk is running ~11.3@125mph on 30psi (was tuned @33psi) http://www.mitsustyle.com/forums/showthread.php?t=23684 Brad(Cel1ca) is running 12.2@129mph with no nitrous! http://www.mitsustyle.com/forums/sho...&postcount=130 |
Re: MAP Event @ BIR: Results!
good numbers so far
|
Re: MAP Event @ BIR: Results!
I didn't even know it started today. Good luck to all who are there and hopefully all cars can make it back on their own power
|
Re: MAP Event @ BIR: Results!
Sweet, I want to see a 10 second time up there from someone I know!
|
Re: MAP Event @ BIR: Results!
Quote:
|
Re: MAP Event @ BIR: Results!
Oh, another thing about IE8 is that the scrolling banner is only showing the top 1/3 of the words!
|
Re: MAP Event @ BIR: Results!
Halon ran a 10.9@137mph!!! Then broke an axle. :( They're hitting up napa to get a new one in and get it down the track tomorrow, woot! Congrats Brandon!!!!
DB Performance tuned honda ran 10.6@126mph blowing off intercooler piping at the end of the run. Lots of mitsu's representing up there! Racing is done for the day, but if you can get up there tomorrow go for it! To quote Jim, 'It's a racer's dream!' |
Re: MAP Event @ BIR: Results!
Sorry to hear you broke Brandon, but great time!
|
Re: MAP Event @ BIR: Results!
i wish i could be there but wheel bearings prevent me, congrats to brandon on hitting 10's.
|
Re: MAP Event @ BIR: Results!
that is an awsome time and solid trap! Way to go Brandon!
|
Re: MAP Event @ BIR: Results!
Jim went 11.3
Brad went 11.2@132, going into 5th gear, we are raising his revlimiter for tomorrow I thought I saw Silk run an 11.1 I saw DaveH run 8.4 in his Supra Lots of mid 11 second DSMs and Evos. Andy from Elite's 240SX broke his flex plate on his first try. Nate/URV8SUX has broke 2 trannies going into second gear. Brandon/Halon needs a 3-bolt rear driver's side axle, so if anyone is coming up and can get one!! |
Re: MAP Event @ BIR: Results!
Those are some good times, congrats to all, wish I could be there.
Anyone getting some good video? |
Re: MAP Event @ BIR: Results!
SleepyDSM went 11.4 his first run. Not sure if he beat that.
|
Re: MAP Event @ BIR: Results!
What is the situation on the MAP RX7?
|
Re: MAP Event @ BIR: Results!
freakin awesome numbers guys! I wish I could have gone!! ARGH!!!
|
Re: MAP Event @ BIR: Results!
I'll bring Mighty Putty up tomorrow for Brandon to fix his axle with!
|
Re: MAP Event @ BIR: Results!
does it have to be the driver side or are both the same?
|
Re: MAP Event @ BIR: Results!
Needs to be DS unless he doesn't have a LSD rear diff. That's rare. And if it's non-LSD it need to be from a non LSD. I will be heading up that way, but I don't have an axle. Anybody with one, I'd be willing to meet up and bring it up for Brandon.
|
Re: MAP Event @ BIR: Results!
that sucks, ive got a passenger side but not the driver side, as i broke my driver side a while back as well
|
Re: MAP Event @ BIR: Results!
Closest junk yard is that lists one:
http://www.atsautoparts.com/ $75 ATS Auto Parts USA-MN(Melrose) E-mail 1-800-783-6708 1-320-256-3827 Sales Department The Sales Department is open Monday - Friday from 8 a.m. to 5 p.m. (CST) And Saturday from 8 a.m. till noon. Phone : (320) 256-3827 (800) 783-6708 toll free 30655 County Road 17 Melrose MN 56352 |
All times are GMT -5. The time now is 12:19 PM. |
Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.