Re: MAP's 2008 Evolution X GSR Build Thread aka Project GGX
Quote:
|
Re: MAP's 2008 Evolution X GSR Build Thread aka Project GGX
The offset is +20 on these so they would fit Evo 8 without spacers, thoughts?
|
Re: MAP's 2008 Evolution X GSR Build Thread aka Project GGX
Quote:
Even DSMs have a nice cast option. :) http://www.maperformance.com/hawver-...sm-hawver.html $538 at MAP. |
Re: MAP's 2008 Evolution X GSR Build Thread aka Project GGX
Sounds good (the offset), just throw some meat on there! 265's get my vote but 255's might be safer.
|
Re: MAP's 2008 Evolution X GSR Build Thread aka Project GGX
Quote:
|
Re: MAP's 2008 Evolution X GSR Build Thread aka Project GGX
That cast IM looks like it was made in the 80's.
|
Re: MAP's 2008 Evolution X GSR Build Thread aka Project GGX
Quote:
|
Re: MAP's 2008 Evolution X GSR Build Thread aka Project GGX
Quote:
If you don't want bling, then shave and coat with thermal dispersant. Quote:
Used his website so I wouldn't totally thread jack this thread by using a competitors website. Anyways, back on topic, sick Evo X. Whoever got your IX is a lucky piece of shit. |
Re: MAP's 2008 Evolution X GSR Build Thread aka Project GGX
The IX sold?
|
Re: MAP's 2008 Evolution X GSR Build Thread aka Project GGX
Yea for $13,500. (I think, just know it sold and he was asking 13,500)
|
Re: MAP's 2008 Evolution X GSR Build Thread aka Project GGX
It was a VIII, not IX.
|
Re: MAP's 2008 Evolution X GSR Build Thread aka Project GGX
and it sold for $12,500 :)
|
Re: MAP's 2008 Evolution X GSR Build Thread aka Project GGX
I would of 100 percent bought your VIII had it been for sale a month or two from now. That is a bomb deal.
For now I'll be happy with a clean DSM. :) |
Re: MAP's 2008 Evolution X GSR Build Thread aka Project GGX
Quote:
|
Re: MAP's 2008 Evolution X GSR Build Thread aka Project GGX
Sweet, good to hear it sold. It was a nice car, no idea it had those miles, but on a modded car, who cares, it's all replaced anyways.
|
Re: MAP's 2008 Evolution X GSR Build Thread aka Project GGX
Got our new MAP 3.5" short ram intake installed late last week, it will be offered with a reducing coupler for the stock turbo inlet and a larger one for those of you with turbo upgrades :)
Due to the removal of the stock MAS housing this unit will require tuning. Although I doubt this will be many people's first modification here are the gains we realized from this intake and MAF scaling adjustments, no timing or boost adjustments as of yet: |
Re: MAP's 2008 Evolution X GSR Build Thread aka Project GGX
^ Saw that in person last week, looks very nice.
|
Re: MAP's 2008 Evolution X GSR Build Thread aka Project GGX
Know why you gained 22hp from just an intake and maf. That's nuts. I wish I owned an evo x. Can't wait to see what you do to it next.
|
Re: MAP's 2008 Evolution X GSR Build Thread aka Project GGX
Quote:
|
Re: MAP's 2008 Evolution X GSR Build Thread aka Project GGX
Yep, can't take all the credit from the intake, AFR was tweaked during MAF scaling.
|
Re: MAP's 2008 Evolution X GSR Build Thread aka Project GGX
Quote:
Impressive bolt on gains! |
Re: MAP's 2008 Evolution X GSR Build Thread aka Project GGX
Quote:
I like that heat shield / air director... Is that a MAP piece? |
Re: MAP's 2008 Evolution X GSR Build Thread aka Project GGX
It sure is, pricing to come shortly :)
|
Re: MAP's 2008 Evolution X GSR Build Thread aka Project GGX
Short Ram Intake / Polished Aluminum Finish $219.99
Add Heat Shield / Brushed SS Finish $79.99 Advanced Ceramic Coating / Intake Pipe $34.99 Advanced Ceramic Coating / Heat Shield $19.99 |
Re: MAP's 2008 Evolution X GSR Build Thread aka Project GGX
I finally got around to having my Work wheels and Swift Sport lowering springs installed this past week and I'm very happy with the outcome :) The Gunmetal on Graphite Gray has grown on me and I love the new stance from the Swift springs. Ride quality is great (with the exception of a select few crappy MN roads) and I get a much better feel for the road over the stock springs.
We will be addressing the exhaust system next, updates and dyno comparisons will be posted in the near future! |
Re: MAP's 2008 Evolution X GSR Build Thread aka Project GGX
It's been a while here and there have been significant changes so bear with me as this will be a bit of a bulk update lol. This update was supposed to be a simple catback replacement, but a lean condition and time constraints changed all of that. To make a long story short we ended up replacing the entire turboback exhaust, upgrading the majority of the fuel system, and switching to E85 as outlined below:
MAP O2 Eliminator Downpipe / Recirculated MAP 304SS Test Pipe (Link coming soon) MAP 3" 304SS Catback Exhaust with Varex Muffler (Link coming soon) FIC 1100cc Fuel Injectors Deatschwerks 300lph Fuel Pump with MAP Install Kit Grimmspeed Manual Boost Controller I'm pretty happy with an extra 73whp from these modifications, what kind of power levels have other people attained with similar mods? Future plans include an upgraded actuator, AEM Xwifi wideband, and most likely a clutch before we get too crazy lol. Varex Mufflers I have to dedicate an entire paragraph to these things. It is quite possibly the single best investment I have made when it comes to automotive upgrades. For those that aren't familiar with these it is essentially a muffler with an electric motor controlled by a wireless key fob. The motor opens and closes a butterfly valve leaving you with a full 3" passage when fully open. When the butterfly valve is closed the exhaust gases travel through a smaller opening in the muffler that bypasses the valve entirely and subjects the gases to additional baffling. Essentially you can switch between a nearly stock sounding exhaust note and a full 3" exhaust with the press of a button :) We will have a production version of my catback and an Evo 8 & 9 version in the near future. You can find more information from the manufacturer here. |
Re: MAP's 2008 Evolution X GSR Build Thread aka Project GGX
i have a simular exhaust set up except mine is a 2.5 inch downpipe with a e-cutout then going into stock exhaust system so i can have loud when its just me and quite when i need it i love it as well, i looked into those muffler but they were spendy IIRC
|
Re: MAP's 2008 Evolution X GSR Build Thread aka Project GGX
Wow those wheels look super sexy!
|
Re: MAP's 2008 Evolution X GSR Build Thread aka Project GGX
Varex Mufflers FTW (I have one sitting around for when I build the exhaust for my 88)
|
Re: MAP's 2008 Evolution X GSR Build Thread aka Project GGX
I see they have one with a 3" inlet and outlet. I could replace my test pipe with it, and it would be a smoother cutout-style system.
|
Re: MAP's 2008 Evolution X GSR Build Thread aka Project GGX
It's pretty big sir, better check the dimensions. Rear of the car would be no problem though.
|
Re: MAP's 2008 Evolution X GSR Build Thread aka Project GGX
I'll have to look into that.
|
Re: MAP's 2008 Evolution X GSR Build Thread aka Project GGX
Quote:
I wish I'd run my car when I was 360tq/340hp at DB. I suspect it would be in that 400/390 ballpark. |
Re: MAP's 2008 Evolution X GSR Build Thread aka Project GGX
Quote:
-AFE/Perrin intake -MAP o2 elim dp/ETS testpipe/Cobb catback -ported/coated stock exhaust manifold -ported stock IM/TB -Walbro 255 fuel pump -Grimspeed 3-port BCS -MAP FMIC w/Nisei UICP (stock LICP) The only other things I'm considering at this point are a set of larger fuel injectors and a mild upgrade stockframe turbo (something the size of a FP Green or BBX-Lite). Back on topic: Nice progress, Chris! I'm looking forward to seeing more product details/pictures of your testpipe and catback. |
Re: MAP's 2008 Evolution X GSR Build Thread aka Project GGX
Looking good Chris.
I hit I think 393whp/400wtq on your dyno on my stock turbo E85 setup. Still stock o2/downpipe and FMIC. I think 400whp/400wtq is totally doable but its running 30psi and lots o timing. For 24psi great numbers...stock turbo E85 still my favorite setup! |
Re: MAP's 2008 Evolution X GSR Build Thread aka Project GGX
What did your guys' boost graphs look like at those power levels? This thing tapers hard on the top end...
|
Re: MAP's 2008 Evolution X GSR Build Thread aka Project GGX
http://i21.photobucket.com/albums/b2...scan0003-1.jpg
I don't have a boost plot from when i made the 393/400 or whatever on your dyno from the dyno day. But this is the same tune from DB's dyno...this is with cosworth cams too. It had a perrin 3 port and the wga cranked down a few more turns too. This is about all you will get it to hold up top. |
Re: MAP's 2008 Evolution X GSR Build Thread aka Project GGX
Finally broke the 400whp barrier :) What's the stock turbo record? This was with the same mods and a simple fuel pump rewire which rectified the lean condition, EF2 testing coming soon!
http://www.maperformance.com/img/Chr...yEVOXsmall.jpg |
Re: MAP's 2008 Evolution X GSR Build Thread aka Project GGX
Nice powerband.
|
Re: MAP's 2008 Evolution X GSR Build Thread aka Project GGX
Its always good to be on power for 3000rpm, or more.
~John |
All times are GMT -5. The time now is 06:46 AM. |
Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.