MitsuStyle - TCases, 1g AWD Tranny, 1g Rods/Pistons(2sets), 2g Rings, 1g BOV and More

I've been out of the DSM scene for years now and still have too much stuff hanging out in the garage. I'm down in Winona MN but can ship or meet someone in the Red Wing MN area some weekend. Just make offers on any of this stuff... it's not doing any good sitting here.

2 23 spline Tcases both work fine

1g AWD Tranny-Apparently grinds from 1st to 2nd. Was going to rebuild it be never got around to it. I think I bought this from Halon(I think) a long time ago.

1g Rods and pistons in good shape(2 sets)

2g Piston Rings (enought for 3 pistons, I used one pistons worth)

1g BOV slightly crushed

McGard Spline Drive Lug nuts

Misc Bushings-Subframe, rear swaybar -SOLD

Old School Archer Header that has been rewelded a bazillion times -SOLD

B&M fuel Pressure gauge

Turbo to O2 housng gasket

Stock 1g Cam Gears

1g Center Vents

1g turbo oil return no leaks

1g oil/water/filter housing

1g Coolant tuby thingy on the front of the motor un-dented
---The fact that I can't come up with the name for this shows how long I've been away

1g Datalogger cable--I don't have the software anymore

1g Crank/timing belt gear and BS gear and BS

1g stock fuel rail to AN converter never used

*Not pictured

*6 Bolt Flywheel

*Warped 1g head with springs/valves retainers... maybe use for a paperweight?

PHONE# 507-458-SixNineOneThree Feel free to leave a message if I can't make it to the phone or text if you're shy. :p

Pictures below:

http://www.hbci.com/~jbeebe/ForSale/FuelFitting.jpg

http://www.hbci.com/~jbeebe/ForSale/MiscParts.jpg

http://www.hbci.com/~jbeebe/ForSale/Tranny.jpg

http://www.hbci.com/~jbeebe/ForSale/TransferCases.jpg