Goodhart's Performance Part-out!
Old school Buschur Racing 3” Turboback Exhaust w/ Dynomax muffler and 3" V-Band connection
(all 1 giant piece AFAIK, maybe 2, not my doing...) -$200 OBO http://farm6.static.flickr.com/5009/...d7d6ed40_m.jpghttp://farm6.static.flickr.com/5006/...146e9498_m.jpghttp://farm6.static.flickr.com/5203/...12098101_m.jpg ^^It's in there, garage was a mess lol -10 AN Pushlok Turbo Oil Drain with extra straight -10 fitting (more than $40 worth of fittings alone LOL)-40.00 https://fbcdn-sphotos-a.akamaihd.net..._8332091_n.jpg Other small stuff: good condition 1g coolant overflow $5 http://farm6.static.flickr.com/5249/...64dcb138_m.jpg 1g interior door panels (grey in color, good shape, both sides, no carpet) make an offer Freedom Design Front Strut Tower Bar -make an offer -3 Stainless Braided Turbo Feed Line -$20.00 Ebay Rear Strut Tower Bar -make an offer 2 or 3 sets of stock plug wires : make offer SOLD: Primo Performance 2.5” Aluminum Intercooler Piping -$200.00 OBO perkal8tr Random 1g lower intercooler pipe $25perkal8ter 6 bolt ARP's -$25 perkal8tr Headlights- $100 x-pride n/t throttle body w/ FIAV bypass plate-$100 - b00sted_spyder Clear Cam Gear cover -$50 - b00sted_spyder JM Fab coil pack relocation bracket -$30 - b00sted_spyder TiAL 38mm External Wastegate w/ dump -$130.00 GnArKiLl Eibach Sportline Springs -$100.00 eagle talon guy Smoked 1GB clear corners -$20 eagle talon guy A1 Technologies Headstuds $150 Chang Fel-Pro permatorque $35 Chang Crower Stage 2 Cams (272's) $180 s1ngletracker 2.5" Catco High flow cat BNIB $50 95tsi Brilliant 1G/2G HID kit w/ slim ballasts$75 95tsi Koyo aluminum radiator with 2 slim fans attached -$100 samysnake 1g center vent gauge pod $25 perkal8tr EPROM ECU w/ custom chip -$150 mikefromMN KYB AGX Shocks -$150.00 Momin (speedfreak) Shortblock$500 Chang Shaved And Powdercoated Valvecover -$30 cornfed2.4 1G Head minus cams, Supertech dual valve springs - $250.00 OBO Chang 1g n/t thermostat housing $10 Chang Competition Stage 4 Clutch -$250.00 Chang Forced Performance cast 4" intake w/ recirculation tube for BOV -$65 DSMINMN Custom Cold Air Intake (comes with the massive K&N filter also) (will work for 1g or 2g) -$100.00 DSMINMN black top CAS $20 Dan Chang 1g fuel filter (x2)$5 Dan Chang NRG Adjustable Fuel Pressure Regulator w/ fuel rail connector and gauge -$100.00 Dan Chang Corbeau 3 point harnesses (universal) -$50 cornfed2.4 DIY Dual Walbro 255lph HP pumps -$100.00 Chang Stock 2g MAS -$40 spaz's buddy Home Made Small Battery Tray -$20 GG_IX_SE NOS Nitrous bottle with some solenoids, line, etc $100 carltalon 1g FWD KYB GR-2's w/ Eibach Prokits springs -$120 OBO some kid Taylor 10mm Thundervolt plug wires (brand new) -$50 Chang Primo Performance vacuum distribution block -$20 obo DSMPARTSGURU 1g radiator hoses (brand new) Ling Ling (with shell) GReddy type RS Blow Off Valve (like new)-$150 fran05 Stcok Evo IX FMIC -$50 Perkal8tr T3 SC-61 Turbocharger w/ Primo Performance Ceramic Coated O2 Housing -$600 mnsc kid 28x11x3” Dejon Tool Front Mount Intercooler (Swifty's old one) -$150 Ling Ling Suspension Techniques Add-On Front Sway Bar (comes with all the poly bushings)-$20 OBO Ling Ling LaCroix "REEF" SMIM- $500 Andy Nash knockoff EWG $40 Golan filter/fuel feed line/1G rail $75 Alpha_D [B]ACT Streetlite 6-bolt Flywheel -$85.00 rabeb25 T3 Manifold-$150.00 OBO x-pride Corbeau CR-1 microsuede seats with Corbeau brackets for 1g $650 Dan H. |
Re: 1994 Talon TSi AWD (Highly Modded) $6,900 obo
Reason I am parting it:
Well, Friday night when I attempted to pick it up, I thought I had fried the transfer case. I had it towed back to Primo because that was my only option at 11:30 Friday night. Today they looked into it, I had already sourced a new transfer case over the weekend, I figured bingo bango put in new t-case, and be done. WRONG. It ended up being the transmission. Mike pulled the drain plug and very little fluid came out. It developed a leak somewhere while I was doing vacuum pulls on the way back, it still shifted just fine, but it started to howl leading me to think it was the transfer case. I pulled over into a gas station as soon as I heard the noise, and by that time apparently the fluid was almost all gone. Mike said when he pulled the drain plug, it had a burnt smell and there was a thin coating of fluid all over the bottom of the car. Makes me wish I would have picked it up in the daylight so I could have possibly seen this, Primo is currently trying to figure out where exactly it leaked from to see where I should go from here as far as the warranty from TRE. Once we know where/what it leaking from, I will contact TRE and go from there. Either way, I'm done with DSM's. |
Garage cleanout part 1
delete please.
|
Re: Garage cleanout part 1
Pictures of the short throw?
|
Re: Goodhart's Performance Part-out!
Threads moved/merged, let the part-out begin!
|
Re: Goodhart's Performance Part-out!
dibs on the coil pack relocation bracket, and i'll probably want a few other things.
that throttle body is brand new? Does it have a new ISC? If so, i'm likely to take it. |
Re: Goodhart's Performance Part-out!
Can i get some pics of the FMIC and the piping, if the car is at primo I'll be in that area tomorrow.
Price me on those 2 items they seem awfully high compared to the rest of the deals, I know you just paid new for them too. Good luck. |
Re: Goodhart's Performance Part-out!
Quote:
Quote:
If you buy 3 or more items I can cut you a small deal. :) |
Re: Goodhart's Performance Part-out!
Ok, I'll go check it out, i don't know anything about swifty's old fmic I'll have to ask.
|
Re: Goodhart's Performance Part-out!
Edited some. I decided to keep the valvesprings and retainers for the Evo, so the engine will be getting taken in half. Prices adjusted.
|
Re: Goodhart's Performance Part-out!
Quote:
|
Re: Goodhart's Performance Part-out!
Quote:
http://www.throttlebodys.com/ Advantages? No need for a throttle body elbow if you just use a 45* coupler, and there is one less potential boost leak. If I'm not mistaken they are a hair larger also. You probably won't find any HP from switching to one, but for me it was worth it just to have one less spot for a boost leak to form. |
Re: Goodhart's Performance Part-out!
ah, so I suppose that TB won't work with stock intercooler piping then eh?
|
Re: Garage cleanout part 1
Quote:
Sorry for the late reply, I'm working on getting a pic. |
Re: Goodhart's Performance Part-out!
If I'm a dumbass I might be interested in the shell.
|
Re: Goodhart's Performance Part-out!
Quote:
|
Re: Goodhart's Performance Part-out!
I need the valve cover. Please give me a call 612 298 5313 names tyler.
|
Re: Goodhart's Performance Part-out!
hay dude ill take the poly mounts shoot me a pm with your paypal info
|
Re: Goodhart's Performance Part-out!
Ok everyone, here is the deal. The car is still sitting at Primo because I haven't had a chance to grab it and drag it back to my parent's house yet. As soon as I get it back, I can start taking parts off. Soon as I get it back, I will keep those interested in parts informed as I start tearing it apart. :)
|
Re: Goodhart's Performance Part-out!
Bump. Still haven't gotten to tear it apart yet, but I have been removing parts by request. Don't be afraid to make offers!
|
All times are GMT -5. The time now is 10:02 AM. |
Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.