Performance partout 2.4 engine, twin disk, FP3575, etc.
 

Sold most everything, just a few things left. Lowered prices, gotta get this stuff out of here.

Forced Performance 3575 75lb/min turbo, brand new unpolished cover, rebuilt by FP 1500 miles ago, zero shaft play SOLD


Buschur Racing 3.5” turboback stainless exhaust with bullet muffler in cat location and oval muffler in rear, quiet enough for street use, sounds great $450

polished tubular 02 housing, not sure of the brand, pretty nice though SOLD

Re: Performance partout 2.4 engine, twin disk, FP3575, etc.
 

fa la la la la la

Re: Performance partout 2.4 engine, twin disk, FP3575, etc.
 

Damnit. The list I could create..that scattershield, head...arg. How ported is the head? Who did the work? Clutch seems good too, this with a shaved down clutch fork?

Re: Performance partout 2.4 engine, twin disk, FP3575, etc.
 

Any stripped holes on the VC? If it's all in good order I'll paypal you the money for it.

PS- Thats a good deal on the oil cooler setup. The cooler itself is over 3/4 that price and the fittings aren't cheap either. Some people might want to know what size the lines are though.

Re: Performance partout 2.4 engine, twin disk, FP3575, etc.
 

PM sent

Re: Performance partout 2.4 engine, twin disk, FP3575, etc.
 

Mildly ported, mostly around the bowl area.

Who do you think? :tongue:

Yeah, I didn't have to cut the fork very much, I also clearanced the bolt heads to get it to work well. It took some messing around to get it to engage nice and smoothly, I found the magic combo, at least for 1G's.

Re: Performance partout 2.4 engine, twin disk, FP3575, etc.
 

I don't think so, I haven't used a spark plug cover on it for years, so I don't remember for sure. I need to get some firm commitments on the bigger stuff first though, I don't want to have the car not running due to a valve cover.

Yeah, I know it's cheap, but I'm looking to get rid of this stuff, I'm not the guy that shoots for the moon on prices.

Re: Performance partout 2.4 engine, twin disk, FP3575, etc.
 

How much for the cooler setup without the 90 housing? Can You send me some pics perhaps? How big are the cooler lines?

How much boost did you run with that intake manifold? I heard they cant handle large amounts of boost pressure, just wondering if that held true in your situation. Otherwise Ill have to take it off your hands. Oh and are the secondary injector bungs plugded or how does that work?

Re: Performance partout 2.4 engine, twin disk, FP3575, etc.
 

Would like to buy the FP 4" CAI if it is still for sale.

Jim

Re: Performance partout 2.4 engine, twin disk, FP3575, etc.
 

Yikes, I might have priced that a bit low. Anyways, $100 without the housing. It's tucked in the corner of the garage, I'll have to pull it out to get a pic of it, I'll be out of town til next Saturday.

I only ran 31-32 psi with it, I never had any problems. The secondaries are currently plugged with RC720's, they'll be staying on my new setup. :evil:

Re: Performance partout 2.4 engine, twin disk, FP3575, etc.
 

I'll hold it for you Jim.

Re: Performance partout 2.4 engine, twin disk, FP3575, etc.
 

I assume you're keeping the FP exhaust manifold?

Re: Performance partout 2.4 engine, twin disk, FP3575, etc.
 

Yep. :biggrin:

Re: Performance partout 2.4 engine, twin disk, FP3575, etc.
 

Is that the only way to plug them temporarily, is with injectors?

Re: Performance partout 2.4 engine, twin disk, FP3575, etc.
 

I'm sure you could fab something up, but since you can get a set of stock injectors for free-$40, it doesn't make much sense.

Re: Performance partout 2.4 engine, twin disk, FP3575, etc.
 

True, I guess id have to see it to understand how the 2nd set of injectors mount up.

Any pics of the cooler setup? Ill most likely take it.

Re: Performance partout 2.4 engine, twin disk, FP3575, etc.
 

This picture shows it best. They mount underneath with bungs and have a cap that locks them in place. Then a rail bolts on to the runners.

Re: Performance partout 2.4 engine, twin disk, FP3575, etc.
 

Actually, now that I think about it, you could probably plug them with a metal disk of the appropriate size, like a quarter.

Re: Performance partout 2.4 engine, twin disk, FP3575, etc.
 

Wow, no one has tried snatching up your intercooler yet? IRC Race FMIC is one of the best out there in my opinion, too bad they don't make them anymore. It lets plenty of air to the radiator, has sweet mountaning brackets, can handle big hp, and is very streetable. Not to mention it looks sweeeet on 1ga's!

Re: Performance partout 2.4 engine, twin disk, FP3575, etc.
 

pics of the oil cooler setup?