FS: Evo 9 roller with interior/extras.
Asking $6500. I think that's fair with what it comes with.
Possibly willing to accept a 240z as partial trade. Only interested in a solid body(with the factory dash), engine/trans/interior not needed. Contact: BramageDained@gmail.com or PM me here. I will facilitate shipping, however, I will not arrange it. VIN: JA3AH86C06U025073 93K on the body. Car has a clear FL title. But, is located in MN in the Minneapolis suburbs. At one point a duplicate title was issued, I misplaced the KY title from when I bought the car(it had somehow been packed with my Army gear when I moved) and I needed to update everything to FL once I left the service. So, I have both the FL title and the KY one. There was an accident in 2009 and the vehicle was repaired by my insurance. There was no frame/unibody damage. I slid off the road into a ditch. The passenger front fender and rear door were replaced. The glass in the door didn't break and it still opened. Front lip, both side skirts were also replaced. I drove it out of the ditch and the ~30 miles back home. There is no rust and only slight corrosion on the bare steel hardware. Car was only driven in winter a handful of times. Most of it's time was spent in GA/KY/FL. It's only in MN because it was stored at my Dad's house while I was deployed and I've spent the summer here. I want it gone, I need the room it's taking up to start the next project. If it matters, the car is in both the TX2k event and Texas Streets dvds. I parted out the engine/trans/tcase/turbo kit/FMIC and piping. Everything else is still with the car. $4000 Fuel system $1700 Coilovers $1300 Seats/Sliders/Harness/Harness Bar $300 Battery Relocation $1700 AEM EMS $9000 worth of stuff right there. Fitted car cover Complete interior Complete suspension with Apexi EVX N1 coilovers and swift springs Complete fuel system Complete A/C system AEM S2 EMS and Stock ECU All 4 wheel bearings were replaced at ~72K Torque Solutions Billet 3 piece engine mount set. Fuel system will support >1000 whp and consists of: BlaqOps hanger with 2x Walbro 255s Aluminum surge tank in the trunk Magnafuel 4303 pulls from the surge tank and feeds the rail Aeromotive fuel rail Aeromotive AFPR ID2000 injectors All lines are PushLok Battery is relocated to the trunk in an NHRA approved plastic box. The box is mounted to a aluminum diamond plate mount I had made. There is a 250A breaker located next to the box. There is not a remote kill switch for the battery/alternator. Apexi EVX N1 coilovers were installed by Buschur spring of last year. Interior has: NRG RSC-300 seats/sliders RCI Platinum Series Harness. Recert is Feb 2015, I have the vouchers for a free recert Buschur wrinkle black harness bar JVC KD-AVX77 head unit-iPod control, etc. Mint, stock rear seat. Autometer dual gauge column pod Autometer Phantom series -30inhg/+45psi boost gauge AEM Wideband Extras at no cost: Stock ECU Stock seatbelts PS pump Alternator Fitted car cover AMS Cat-back Radiator with both hoses-no fan. Torque Solutions billet 3 piece mount kit Drive shaft All 4 axles 2 stub shafts that go in the trans/tcase. Extras at additonal cost: Matte Black Volk CE 28Ns with nearly new hankook RS3s $2000 QM 6-leg twin disk w/Hydraulic TOB. Needs new disks, comes with MAP flywheel $500 Buschur Stage 3 MIVEC head w/cosworth M2 cams-Doesn't come with MIVEC cam gear or exhaust side CAS. $1800 Pictures: Vin plate http://i63.photobucket.com/albums/h1...ps4025ab51.jpg http://i63.photobucket.com/albums/h1...ps08501bcf.jpg http://i63.photobucket.com/albums/h1...ps58ff4498.jpg Car on the stock wheels.(Does not come with FMIC) http://i63.photobucket.com/albums/h144/Bramage/side.jpg http://i63.photobucket.com/albums/h1...mage/front.jpg Empty engine bay. Strap is just holding up the AC compressor as everything stayed connected when the engine came out and the system is still charged. http://i63.photobucket.com/albums/h1...ps9ad3b984.jpg Trunk with surge tank, magnafuel pump and battery box. http://i63.photobucket.com/albums/h1...pscc929af7.jpg Front seats/harness. http://i63.photobucket.com/albums/h1...ps8ddd5474.jpg Gauges http://i63.photobucket.com/albums/h1...psdf82f14b.jpg Head unit http://i63.photobucket.com/albums/h1...ps5b5c3913.jpg Backseat http://i63.photobucket.com/albums/h1...ps295c434a.jpg Harness on harness bar http://i63.photobucket.com/albums/h1...psfee1ac22.jpg Car on the Volk wheels that are available at extra cost. http://i63.photobucket.com/albums/h1...ewshoes003.jpg |
Re: FS: Evo 9 roller with interior/extras.
Such a steal!
You should trade me for a cheater bike :) |
Re: FS: Evo 9 roller with interior/extras.
dark2g has cash ready to paypal he emailed you
|
Re: FS: Evo 9 roller with interior/extras.
I know someone with cash in hand already emailed also ready to pick it up tomorrow.
|
Re: FS: Evo 9 roller with interior/extras.
obviously not going to last as it sounds like it's gone
|
Re: FS: Evo 9 roller with interior/extras.
Pending to someone local. If that somehow that doesn't work out, there's 3 others in line.
|
Re: FS: Evo 9 roller with interior/extras.
That was quick! Can't wait to see the new project car out next year!
|
Re: FS: Evo 9 roller with interior/extras.
Saw wheat! My old head unit, goodbye old friend!
Hope it went to a good home, and glad someone bought this before I did! |
Re: FS: Evo 9 roller with interior/extras.
Word is it will be back on the road as mostly stock.
|
Re: FS: Evo 9 roller with interior/extras.
shoooot dark 2g was gonna go 9's with it. congrats simulatewood
|
Re: FS: Evo 9 roller with interior/extras.
Quote:
|
Re: FS: Evo 9 roller with interior/extras.
It must be super easy to go 9s
|
Re: FS: Evo 9 roller with interior/extras.
^Just keep adding power.
|
Re: FS: Evo 9 roller with interior/extras.
Have enough power and practice and You'll get there eventually I suppose. haha
|
Re: FS: Evo 9 roller with interior/extras.
Everybody's doing it.
|
Re: FS: Evo 9 roller with interior/extras.
Buy a liter bike for $4,xxx, but a stretch on it. Bam 9's, for under 5k that is reliable and doesn't break transmissions.
You find a new a car yet to go fast in yet Josh? |
Re: FS: Evo 9 roller with interior/extras.
Quote:
|
Re: FS: Evo 9 roller with interior/extras.
Quote:
I'm just now seriously looking for a 240z shell. I needed the Evo out of the way. |
Re: FS: Evo 9 roller with interior/extras.
Is it still available? Pm me your # if it is
|
Re: FS: Evo 9 roller with interior/extras.
really only 9's with the power it made. i guessed high 8's. aarons butt hurt as usual lol.
|
All times are GMT -5. The time now is 06:54 AM. |
Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.