Custom Grind Cams
I have a set of custom grind cams manufactured by Comp Cams (who manufactures for FP). They are very similar to FP3x's. The lobes between the 3x's and the custom's have a difference of .1mm or less. I have the measurements for both sets of cams from my caliper. If you're interested, PM me. They are brand new.
$300 takes both. I will not separate them. |
Re: Custom Grind Cams
1 Attachment(s)
Pic.
|
Re: Custom Grind Cams
They dont look so brand new in the picture. Please send me manufactures specs to dan_moore@earthlink.net Thanks.
|
Re: Custom Grind Cams
3 Attachment(s)
I assure you that they are brand new. 95talonracer and EclipseGST can vouch for them, since they are the only two, besides myself, that have seen them in person on here. The pictures aren't very good at depicting that. The first pic posted is the best. The stuff on the rag is assembly lube, not oil. I decided to coat the lobes with it so they would not rust and I used the rags so that they wouldn't get damaged in the boxes. I will be sending you the specs shortly. I spoke to Comp Cams to make sure that the specs were correct. The only difference between these and FP3xs is 1 degree of duration and .004 (4 thousands) of lift.
|
Re: Custom Grind Cams
Yes I personally seen them and they are brand new. They are a really nice looking set of cams. Good luck with the sale.
|
Re: Custom Grind Cams
Are these like the 272s? Can they be ran with a stock head?
|
Re: Custom Grind Cams
Look on FP's site for the FP3x specs. They're quite a bit bigger than 272's.
|
Re: Custom Grind Cams
Damn, I'm looking for 272's.
|
Re: Custom Grind Cams
The cams I'm selling...
Adv. Duration: 258 Duration @ .050: 211 Valve lift: .410 Crower 272... Adv. Duration: 272 Duration @ .050: 211 Valve lift: .393 Crower 280... Adv. Duration: 280 Duration @ .050: 213 Valve lift: .411 OEM (Factory)... Adv. Duration: 256 Duration @ .050: 190 Valve Lift: .366 |
Re: Custom Grind Cams
And yes, they can be ran in a stock head, but I wouldn't run the stock valve springs. I do have a Crower Valve Spring kit as well, if you're interested. Never used.
|
Re: Custom Grind Cams
Price lowered to $350.
|
Re: Custom Grind Cams
I also vouch as well that these are brand new. Never been installed what so ever, no scratches or anything wrong.
Buy em up! |
Re: Custom Grind Cams
so are these the equivelent of a 258 because that is what it looks like. If they are like the 280's or larger how much would you want for those and the new springs/retainers
|
Re: Custom Grind Cams
Great person and has Quality parts. I seen the valve springs and they are BRAND NEW as well. I would buy this setup if I had not already bought mine already.
|
Re: Custom Grind Cams
Quote:
Cams: $300 Crower Valve Springs: $200 |
Re: Custom Grind Cams
$300 for the cams. Get them out of my face please.
|
Re: Custom Grind Cams
Bump
|
All times are GMT -5. The time now is 07:56 PM. |
Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.