Re: Brad's New Bike - '12 ZX10R
 

Nope! Never will! Perk of the job :D

Re: Brad's New Bike - '12 ZX10R
 

Haven't done much as far as mods this summer as it's pretty much how I want it other than nitrous and I don't think I'll put nitrous on it. Too much of a headache.


I did lower the front and back a little bit more this year though. Gives it a solid stance with my stretched tires :spin:
http://i6.photobucket.com/albums/y20...ps6xo5tem4.jpg

Earlier this month at proving grounds was the best it's gone. Bike weighed 395lbs which I was pretty pumped about. I ended up weighing 225 suited which I wasn't so pumped about lol. If I could lose 20 lbs over the winter I could get this thing into the 8s on pump gas then keep getting better launches I think I could be there pretty consistently.

http://i6.photobucket.com/albums/y20...psdcihol6t.jpg
http://i6.photobucket.com/albums/y20...psxovmlcta.jpg
http://i6.photobucket.com/albums/y20...psnbi0t0dn.jpg


Picked up a cruiser this week though so probably put some money into making that my own. Maybe make a thread on that too if I get bored. Kind of hope I could run 11.99 on this thing lol
http://i6.photobucket.com/albums/y20...ps9bbhgbzr.jpg

Re: Brad's New Bike - '12 ZX10R
 

Those time are so consistent, awesome work Brad.

Re: Brad's New Bike - '12 ZX10R
 

Seriously, change the exhaust on the cruiser. That thing is a cannon and looks goofy and out of place with the rest of the bike.

Or just replace the can with this:

http://i5.photobucket.com/albums/y19...GunExhaust.jpg

Re: Brad's New Bike - '12 ZX10R
 

Always loved warriors, nice! Only gripe about those is the stupid exhaust pipe, no idea what they were thinking.

Re: Brad's New Bike - '12 ZX10R
 

Thanks sir! I did put an auto shift on it too, so I'd shift at the same time everytime as long as I didn't spin. That probably helped be pretty consistent too lol

http://img3.imageshack.us/img3/8669/...2pcwarrior.jpg

The bike had some Vance and Hines Big Radius on it for a little while before he took them off. He had them coated black and I remember when I rode it with the pipes it sounded good and remember them looking really nice when they were blacked out.

No money now but probably see if I can score a good deal on something this winter so got time to decide. I'll have to make sure they don't scrape either, this thing has been getting the pegs scrapped pretty hard this past weekend lol

Re: Brad's New Bike - '12 ZX10R
 

Does the warrior wheelie?

Re: Brad's New Bike - '12 ZX10R
 

Ended up going to a 520 drag chain and currently have a -1/+7 sprocket on the bike. I also have a +6 sprocket in case the +7 is too much gearing. Went with an aluminum rear sprocket and got some aluminum sprocket nuts to try and save a little weight. Didn't save a ton of weight but saved a bit.

http://i6.photobucket.com/albums/y20...psjsoqgxoi.jpg

Before I changed the sprockets a busa wanted to race the bike so a quick run was done against that bike.

http://www.youtube.com/watch?v=HhxFHQGk6-c&hd=1

Since I am pretty desperate for 8s on pump gas and I didn't save that much weight with the 520 setup, I plan on running with no rear caliper at the track this weekend. Couldn't believe how much that stuff weighed. Finger crossed between the new drag chain and sprocket combo and rider weight loss mod of around 10-15lbs, I can crack off that 8 on pump gas
http://i6.photobucket.com/albums/y20...pslznbzvvy.jpg

Also had a local college photography student come over and take some pictures of the bike while I worked on it and took a cool one when I was done> Photo cred to Logan Baxter Photography
http://i6.photobucket.com/albums/y20...psmx5kvm0w.jpg

Re: Brad's New Bike - '12 ZX10R
 

Love it, our bikes couldn't be any more different; but we are both racing Kawi's baby.

Re: Brad's New Bike - '12 ZX10R
 

LOL damn dude! Change out all the bolts for aluminum and get CF body work. Remove one caliper and rotor up front!

Awesome on the rider mod, just don't forget to poop in the morning and take ex lax the night before. Can't wait to see what this thing runs. I might be able to come out Sunday and snap photos if I can hitch a ride or something.

Re: Brad's New Bike - '12 ZX10R
 

Damn you smoked that fool on that fat bike.
Stay safe out there.

Re: Brad's New Bike - '12 ZX10R
 

That fat bike is fat. Weigh almost hundred pounds more then that light liter bike.

Re: Brad's New Bike - '12 ZX10R
 

Thank ya sir! Good luck racing your bike this year!

Haha I think taking a morning shit would lose as much weight as changing the bolts to aluminum. I was half tempted to change the fairing bolts to aluminum though just to have black bolts instead of silver. Ricer mods wuddup.

I'd say come with but I can't imagine the truck being very comfy for 3 hours with 3 people in it. We could make it work if you wanted to come tho

Lol it was all in good fun to make sure our bikes were running good before the track this weekend. I of course didn't post the video where I got rocked because I couldn't find 2nd gear 2 times and when I spun hard. That fat bike rocked me then

Re: Brad's New Bike - '12 ZX10R
 

Desperate for those 8s I went and got some World Wide ceramic wheel bearings lol

http://i6.photobucket.com/albums/y20...psu75fk0mg.jpg

Went back to the track on October 1st and only got 4 passes in as the track was just packed. Went 9.0 twice then 9.1 and a 9.2 on 2 wheelies. Brought the dog and he loved the track as a few other buddies had dogs and it was like a puppy play date at the track lol.
http://i6.photobucket.com/albums/y20...pslcerf5wz.jpg

Kind of bummed I didn't get that 8 I decided to go back again on the 8th for one last shot at it, and I was pumped I did. First pass off the trailer it went 8.9 and knew it was going to be a good day. Ended up running 8.8's 5 times and went 8.9 4 times. Bike was fuckin moving this weekend in the cooler air.

http://i6.photobucket.com/albums/y20...psrbr9hz5c.jpg

Now I kind of want to try and set the bike up for some standing mile stuff and see if I can hit that 200mph mark.

Re: Brad's New Bike - '12 ZX10R
 

Woo woo! Awesome job man! Glad you got that 8. You think the bearings helped or just the cooler air?

Re: Brad's New Bike - '12 ZX10R
 

Finally got around to putting together a quick video of me and paul racing against our buddy with a turbo busa. Pauls on the blue bike with a big bore motor and we were pretty damn close, but he edges me out. The poor turbo busa was just fighting traction issues as it was pretty cold out and the bike needs help with the setup.


http://www.youtube.com/watch?v=Az5vZsACa_Q&hd=1

Starting to work on this thing again! Kinda miss tinkering out in the garage.

Going to pull the motor and send off the head off to get some head work done. Plan is to deck the head, port work, valve job, degree'd cams and thinner headgasket.The guy who is doing my head said he did a similar build for one of his customers and he made 209 on race gas and 199 on pump gas. I'd be extremely pumped to get 200 on race gas as that'd be a huge increase over what it makes now.

http://i6.photobucket.com/albums/y20...pscggzh5bp.jpg

Going to try losing about 10-15ish more lbs between me and riding gear this winter. Hopefully with being lighter and that head work and race gas the bike can dip into the 8.6's so I can say its a mid 8 second bike lol.


Then after doing a track day or 2 in the spring I'm going to put it back to stock wheel base, do a couple aero modifications and see if this thing can do 200mph in a mile and a half out in Maine in September. Should be a fun year!:split:

Re: Brad's New Bike - '12 ZX10R
 

Weren't you pondering the idea of using race bodywork for more aero?

Re: Brad's New Bike - '12 ZX10R
 

Your bike will fly with the head work. Woot woot. Can't wait for next year and some swb roll. Hopefully it's will be a better race when I can use 1st gear

Re: Brad's New Bike - '12 ZX10R
 

This sounds very scary to me.

Re: Brad's New Bike - '12 ZX10R
 

Yea, but can't spend money like I used to and head work seemed like the power would be there all the time for street and drag racing duty vs body work I'd really only use the one time. Still hope to get some sort of belly pan if it'd fit with my exhaust to help air move under the bike better and a big ol' ugly busa land speed racing front fender to help move air over the front tire better. They look ugly with that front fender, but guess its good for around 5mph

Fingers crossed. Hopefully get some more good races in next year!! I don't wanna be the slow guy lol

Hopefully it isn't too scary. I figure I want to do it before we hopefully have kids as I'll have no time for a long while after I assume and by the time I will have time my reaction/riding skills will probably be shitty lol