MitsuStyle

MitsuStyle (http://www.mitsustyle.com/forums/index.php)
-   The Parking Lot - On & Off Topic (http://www.mitsustyle.com/forums/forumdisplay.php?f=21)
-   -   Shepard into the 7's today (http://www.mitsustyle.com/forums/showthread.php?t=9034)

SlowWhite 10-02-2005 07:28 PM

Shepard into the 7's today
 
Just heard from one of the guys on another forum Shep went 7.976@179.06 at E-Town today

Jakey 10-02-2005 07:29 PM

Re: Shepard into the 7's today
 
http://www.dragracecentral.com/DRCLa...r=100#indextop

Ger 'er done! :eek:

MustGoFaster 10-02-2005 07:32 PM

Re: Shepard into the 7's today
 
Wow. He wasn't that far off earlier in the year, but dam.

AJ 10-02-2005 07:36 PM

Re: Shepard into the 7's today
 
hot damn!

JET 10-02-2005 09:09 PM

Re: Shepard into the 7's today
 
Too bad the competition is getting faster too. I wish he would dump some weight out of that pig!! It is a great accomplishment though, and it earns him some new plates!

carltalon 10-02-2005 09:12 PM

Re: Shepard into the 7's today
 
Thats awsome. I want video!!!!

Outlaw1 10-03-2005 02:35 PM

Re: Shepard into the 7's today
 
Sick. Sick. Sick.

sleepydsm 10-03-2005 02:38 PM

Re: Shepard into the 7's today
 
holy shit. thats awesome. nice "street car" haha

niterydr 10-03-2005 02:48 PM

Re: Shepard into the 7's today
 
Thats movin!

1slowdsm 10-03-2005 10:29 PM

Re: Shepard into the 7's today
 
Go Four-Banger!

TurboDomestics 10-03-2005 10:50 PM

Re: Shepard into the 7's today
 
sweet!

Is his car still a 2.0?
yeah, yeah, whatever so what if I dont know about Mr. Shep!

Shane@DBPerformance 10-03-2005 11:09 PM

Re: Shepard into the 7's today
 
The incar video is cool. Turbo respools very quickly. The Pontiac he is racing pulls damn hard on him though.

Jakey 10-03-2005 11:28 PM

Re: Shepard into the 7's today
 
How does Shep do most of his tuning? Strip? Dyno? Guess & Check? ;)

ShiftyGears 10-04-2005 06:20 AM

Re: Shepard into the 7's today
 
Nice, He is really doing well. Darrell Cox and Mike Crawford are running into the low 8's. Not bad for FWD. :eek:

EclipseGST 10-04-2005 09:26 AM

Re: Shepard into the 7's today
 
Quote:

Originally Posted by carltalon
Thats awsome. I want video!!!!

http://www.dsmtimes.org/shepherd/She...9%20E-town.wmv

Insane!!!

Outlaw1 10-04-2005 09:30 AM

Re: Shepard into the 7's today
 
Quote:

Originally Posted by ShiftyGears
Nice, He is really doing well. Darrell Cox and Mike Crawford are running into the low 8's. Not bad for FWD. :eek:

What do those cars weigh? Stock chassis or tube cars?

Pushit2.0 10-04-2005 09:34 AM

Re: Shepard into the 7's today
 
.... dang. That is fast.

~John

ShiftyGears 10-04-2005 10:51 AM

Re: Shepard into the 7's today
 
Quote:

Originally Posted by Super4x4Duty
What do those cars weigh? Stock chassis or tube cars?

Umm, Not sure on what Mike Crawfords are weighs. But it is not a tube Chassis.
Shaun Carlsons car on the other hand is a PRO FWD car which is a tube chassis.

Shane@DBPerformance 10-04-2005 11:11 AM

Re: Shepard into the 7's today
 
The GMs are the fastest cars in his class. But he still running an interior, full glass and a car that still looks like a street car. They will probably try to add some new rules to slow the guys in the 7s down a bit, so that some of the Hondas and other guys can be more competative. But I don't know what they could do to slow Shep down, since he is no where near the minimum wieght for the class, unless they put a restriction on the 4G63 motor specifically or AWD. If they put a restriction on AWD, that would be quite lame, since the FWD guys pull the same or better 60's and can obviously go just as fast.

Goat Blower 10-04-2005 02:46 PM

Re: Shepard into the 7's today
 
Without turning it into a total piece of shit, I doubt if you're going to find any extra weight on his car. He's no fool. Any lighter and it'd look like Curt Brown's old ugly-ass 1G. :D

Steve

Quote:

Originally Posted by JET
Too bad the competition is getting faster too. I wish he would dump some weight out of that pig!! It is a great accomplishment though, and it earns him some new plates!


Pushit2.0 10-04-2005 03:57 PM

Re: Shepard into the 7's today
 
I thought sheps car weight 2650? NDRA rules in Pro 4 with 2 power adders and an aftermarket tranny you can have a 1g AWD w/ a 2.0 motor weigh 1800lbs, class min. I don't know if sheps running a 2.4 or 2.3 or 2.14 but he is well over the weight limit. Also if you run a stock tranny your turbo can be 78mm but aftemarket trannys are 74mm. I wonder if a dog box counts as aftermarket?

~John

Shane@DBPerformance 10-04-2005 04:33 PM

Re: Shepard into the 7's today
 
Shep runs a 2.0l. I am not sure if his tranny counts as aftermarket or not. It is still inside the stock tranny case.

Outlaw1 10-04-2005 04:36 PM

Re: Shepard into the 7's today
 
Quote:

Originally Posted by ecoli
Shep runs a 2.0l. I am not sure if his tranny counts as aftermarket or not. It is still inside the stock tranny case.

Most sanctioning bodies consider something that has dogs instead of synchros an aftermarket trans.

DSM1G 10-04-2005 04:52 PM

Re: Shepard into the 7's today
 
Thats awesome. I was watching some On Demand T.V. car racing the other day and Shep was on it. It was cool, it showed him and his car up close and personal. Anyone else see it?

SlowWhite 10-06-2005 06:09 PM

Re: Shepard into the 7's today
 
Supposedly here is sheps video of 7.9@179 I haven't watched it yet though.
http://x602.putfile.com/videos/27502070626.mov

EclipseGST 10-06-2005 06:35 PM

Re: Shepard into the 7's today
 
Looks a lot different outside the car... He moves out pretty good thats for sure!

EclipseGST 10-06-2005 06:57 PM

Re: Shepard into the 7's today
 
Quote:

Originally Posted by Goat Blower
Without turning it into a total piece of shit, I doubt if you're going to find any extra weight on his car. He's no fool. Any lighter and it'd look like Curt Brown's old ugly-ass 1G. :D

Steve

Well without stock glass and take some of that interior out, I'm sure it would lighten it up quite a bit and still not be that ugly!

TheBlizzard 10-06-2005 07:12 PM

Re: Shepard into the 7's today
 
Yeah he could still dump some more weight. He is probably still about 600lbs overweight compared to his competition. I just saw the in car video, it was pretty insane. 141mph in the 1/8 mile? WTF?

Goat Blower 10-06-2005 08:28 PM

Re: Shepard into the 7's today
 
Quote:

Originally Posted by EclipseGST
Well without stock glass and take some of that interior out, I'm sure it would lighten it up quite a bit and still not be that ugly!

Stock interior panels don't weigh anything. And he's asked about the front windshield, since it weighs 30+ lbs. 2650 with driver is damn light for a streetable DSM, most people are still trying to figure out how he got it that light as it is.

Goat Blower 10-06-2005 08:31 PM

Re: Shepard into the 7's today
 
Quote:

Originally Posted by TheBlizzard
Yeah he could still dump some more weight. He is probably still about 600lbs overweight compared to his competition. I just saw the in car video, it was pretty insane. 141mph in the 1/8 mile? WTF?

There's no way to take out anywhere near that much without bolting an AWD drivetrain to a tube frame with lightweight body skins. I think even Rau's old car without driver was around 2200, and it was a tin can.

Shep's got the magic formula, keep making more horsepower.

Jakey 10-07-2005 12:40 AM

Re: Shepard into the 7's today
 
Could someone tell me what the line is coming out of the top of Shep's valve cover in this picture?
http://www.its-over.net/DSM%20Shooto...5/dscn0211.jpg

TheBlizzard 10-07-2005 01:21 AM

Re: Shepard into the 7's today
 
Quote:

Originally Posted by Goat Blower
There's no way to take out anywhere near that much without bolting an AWD drivetrain to a tube frame with lightweight body skins. I think even Rau's old car without driver was around 2200, and it was a tin can.

Shep's got the magic formula, keep making more horsepower.

I never said he could dump that weight, I was just stating that he is way overweight in his glass. I would say he could probably dump a few hundred pounds though by taking out all the glass and maybe a carbon fiber rear hatch. By saying he 600 pounds overweight is actually a compliment considering how fast he is going even with that disadvantage in his class. But I also agree that his car would not look as good if he went the full distance with making the car lighter. But in his class there are no points for how stock appearing the car is. Its about tin cans with lots of HP that go from point A to point B the fastest.

I would be curious to know how much Gardellas car weighs?

ther1pper 10-07-2005 01:24 AM

Re: Shepard into the 7's today
 
thats pretty bomb

tpunx99GSX 10-07-2005 02:10 AM

Re: Shepard into the 7's today
 
Quote:

Originally Posted by Jakey
Could someone tell me what the line is coming out of the top of Shep's valve cover in this picture?
http://www.its-over.net/DSM%20Shooto...5/dscn0211.jpg

It goes to the Flux capacitor, adds 600 gigawatts of power to his cam shafts.

Outlaw1 10-07-2005 07:55 AM

Re: Shepard into the 7's today
 
Quote:

Originally Posted by Jakey
Could someone tell me what the line is coming out of the top of Shep's valve cover in this picture?
http://www.its-over.net/DSM%20Shooto...5/dscn0211.jpg

Probably a vacuum pump.

Shane@DBPerformance 10-07-2005 09:45 AM

Re: Shepard into the 7's today
 
Quote:

Originally Posted by Goat Blower
I think even Rau's old car without driver was around 2200, and it was a tin can.

Rau's old AWD car was either 2500 or 2600 with driver. Back then in the IDRC Quick 16 class that Rau ran in, they had a huge weight penalty on the AWD cars versus the FWDs. I don't remember if the min weight allowed for him was 2500 or 2600, but whatever it was, Rau was right at it. They pretty much forced Rau to goto an outlaw RWD car and Glazer quit racing his AWD for a few years because of the unfair rules against AWDs also. The playing field nowdays in the NOPI version of the same class that Shep runs in, is quite even without any restrictions on the AWD cars.

Pushit2.0 10-07-2005 09:47 AM

Re: Shepard into the 7's today
 
I would think he gave up driving the car on the street when he went hardblock and methanol. I would also think that Garys car weighs in at class min. to be as fast as possible with the power he makes.

~John

sleepydsm 10-07-2005 10:22 AM

Re: Shepard into the 7's today
 
He's still using a 2.0L right?

Shotgun! 10-07-2005 10:54 AM

Re: Shepard into the 7's today
 
Quote:

Originally Posted by sleepydsm
He's still using a 2.0L right?

Yeah, that's the story. I'm sure it's bored over. Prolly long-rodded too. But yeah it's a 2.0L

niterydr 10-07-2005 11:52 AM

Re: Shepard into the 7's today
 
Groden Aluminum rods. Not sure on the length. (spelling on groden?).


All times are GMT -5. The time now is 02:13 AM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.