IC Piping
 

Contact me for any of your IC piping needs. I work mainly in stainless and keep 2.5" and 3" piping in stock. I also try to keep couplers and T-bolts in stock.

Here is a pic of the FMIC piping on a 2g with a GM MAFT in blow through. He wanted the satin finish on the stainless piping to keep the cost down. I can also do full polished.

This setup with a satin UICP and LICP is $525 including couplers and T-bolts. $600 for polished piping. That is for the FMIC being premounted, but I do the rest of the installation.

Re: IC Piping
 

One more of the car done.

Re: IC Piping
 

Here is a 240sx with the SR20DET conversion. I did mild steel piping for him in a special high temp paint that I found. I looks almost like chrome. I also made a polished stainless intake pipe for him, but it doesn't show up well in the pic because of the high polish.

Re: IC Piping
 

So will you sell just bends for us DIYers? Also do you have a tool to bead the ends of the pipes? Thanks!!

Re: IC Piping
 

I can sell bends seperate. I try to keep a good supply of bends and piping in hand. I have about $800 worth right now. I have a batch of silicone couplers being processed. I bead my pipes with weld, it works just fine.

I am also trying to get a quality silicone coupler made from 2.5" to 3.5" for you GM MAFT guys. My supplier right now makes a 2.5" to 3.25", but not to 3.5".

Re: IC Piping
 

How much would it be for a 90 gsx? I have my ETE32 on it and it's a top to bottom front mount. Its' Johns old one. And a Greddy BOV. It doesn't need to be fancy or anything.

Re: IC Piping
 

PM sent.

Re: IC Piping
 

Alright, I just made an order for $450 worth of IC couplers. These are very high quality 4 ply silicone couplers. I tried out several different brands and these were the best. I am dealing directly with the manufacturer. They are a bright blue on the outside. Their transitions are very smooth too, not abrubt like a lot of them and all of their couplers are nice and thick.

I am getting 2.5" 90 degree elbows, 1.75" - 2.5" transitions (14b-16g outlet to 2.5"), 2" - 2.5" (20g/PTE T04E turbo outlet), 2.5" couplers and 3" couplers. I also have $300 worth of 2", 2.5", 3" and 4" T-bolt clamps on the way.

I also talked to the coupler manufacturer and they are going to make me some 2.5" - 3.5" couplers for you MAFT guys! They don't make them now, but they are going to make up tooling for me. They are 2 months out right now.

Re: IC Piping
 

How much for the 2.5 90 deg elbows?
=Jason-

Re: IC Piping
 

http://jetscustoms.com/xcart/home.php?cat=5

Order them from me though, the online ordering isn't done yet.

Re: IC Piping
 

Are there any silicone couplings or reducers that anyone needs? I am making an order on Monday, so I can put it in with that order.

Re: IC Piping
 

i need a 90* coupler that is also a reducer that goes from 2-2.25". i've seen them for sale but lately i've had trouble finding them again with this gay dialup

Re: IC Piping
 

I will check to see if they have them.

Re: IC Piping
 

I just got another $350 worth of silicone couplers and transitions in stock. I now have 2.5-3.25" (3" MAFT), 2.25-2.5" (2g SMIC), 1.75" couplers, 2.25" couplers and I replenished my stock of other normally stocked items.

Re: IC Piping
 

jet, how much does 2 couplers for the 3" gm maf cost? (2.5-3.25)

-A. Swift

Re: IC Piping
 

Transitions are $22 each. They are nice blue silicone ones. I tried 4 different brands before I settled on this company and I deal directly with the manufacturer.

Re: IC Piping
 

how much for just an upper ic pipe for a 2nd gen any finish but for a gm maf set up. i already have the couplers for the gm maf and what not so id only need the one to the tb and ic. thanks

hks bov flange

Re: IC Piping
 

What IC?

Re: IC Piping
 

stock side mount, and i already have lower ic piping

Re: IC Piping
 

The damn HKS BOV flanges are expensive. With the 2 couplers, 8 t-bolts, HKS stainless flange and piping it would be $175. That is 2.5" 100% stainless.

Re: IC Piping
 

and thats set up for the gm maf right? also can you just take the flange off my car right now?and weld that on?

also would this in the future be able to be converted to fmic upper ic pipe easily? ill have you do that piping too when i decide to get the front mount set up

For this pipe ill most likely be doing it next friday ill pay the money so how long you think it will take after that for it to be done?

Re: IC Piping
 

i need that upper ic pipe hit me up with a pm and well finish stuff up.

Re: IC Piping
 

Hey Jet. How much for each of the intercooler pipes (2-1/4 or 2-1/2) for a 2G with the stock sidemount?

Re: IC Piping
 

How much to mount a Supra smic, and make ic piping for it?
On a awd 1g, with 1g bov. Nothing real fancy, just so it works well.

Re: IC Piping
 

just curious on how much upper and lower ic piping would be for stock side mount with the GM MAF set up for a 1g. and possibly a front mount.

Re: IC Piping
 

How about a 3" upper with a Tial mount on it?

Re: IC Piping
 

I wouldn't even bother with piping to the SMIC, just go with a FMIC. I'll PM with pricing.

Re: IC Piping
 

i need two 3" straight couplers, and also can i pay to have them shipped to an address lol..

Re: IC Piping
 

Yes, I can do that.

Re: IC Piping
 

Hey jet, How much would you charge to fab me up some UICP in 2.5" From the throttle body to the stock location of the sidemount (its where my fmic piping goes to) Flanged for a Greddy type s.

Re: IC Piping
 

?

Re: IC Piping
 

He hasn't logged in 5 days and he hasn't answered his phone. Hrm?

Re: IC Piping
 

^stocker

Re: IC Piping
 

I waited a year before cancelling an exhaust order from JET.

Re: IC Piping
 

hey my buddy wanted me to find out how much some i/c piping would be for his turbo 944, he is running the factory front mount, and if you needed he can run the car down (if you havent dont that car before), also he would like to run an hks ssqv. Thanks jet, Ryan

Re: IC Piping
 

Yeah, I would need to see the car, it isn't real common one to see. I will have room for a car at the end of this week.

Re: IC Piping
 

JET..

i need some new 2.25 IC pipping ran in the dsm.. pm with quote i need this done soon!

Re: IC Piping
 

2 1/4"? I only carry 2.5" in stock, since that is what 95% of people use. 4.9% use 3" :D

Re: IC Piping
 

Jet, really need upper Ic plumming from throttle body down to fmic plummed for greddy rs bov. 3 inch stainless peferred, I have all couplers and reducers if needed. How much?

Re: IC Piping
 

email me some pics if you can. It is hard to make a quote when I don't know how many bends are needed.