![]() |
Just Joined
Someone on dsmtuners.com pointed this site out to me and I just wanted to say hi.. I have a 91 gsx w/ TD05H/20g (34mm flapper), 750ccs, 3" GM MAF, MAF-T, 255/lph Walboro, TurboXS MBC, Buschur Cat-Back & Intake, Dejon-Tool FMIC, 1250cfm Radiator Fans (forgot brand), ACT modified & 2900 X-Treme pressure plate, TurboXS RFL, VRS Downpipe, SBR o2 external dump, VRS Downpipe,SAFC, and digital tuning datalogger.
|
Re: Just Joined
Welcome! I saw your username on Tuners the other day and was wondering if you were on here.
|
Re: Just Joined
Welcome, cracker!
|
Re: Just Joined
Hey, I'm only half cracker, get it right!
|
Re: Just Joined
Welcome! :D
|
Re: Just Joined
Quote:
Welcome! |
Re: Just Joined
I doubt it, I don't know anyone around here with a dsm except Shawn, who use to hang around his broken 2nd gen at S3.
|
Re: Just Joined
Whats S3? Welcome BTW
|
Re: Just Joined
S3 was a shop out on hwy 55. Brian Ruslow (not sure if I spelled his last name right) was the owner, but he moved to FL before winter hit and sold the business. Definatly a good guy and some cool rides came out of that place. I knew he had a few DSMers out at that place and this must be one. lol
Welcome! |
Re: Just Joined
Yep, bought all my parts through Brian.
|
Re: Just Joined
What's the name mean?
|
Re: Just Joined
Brian Rousselow for future reference. Didn't want to watch his name get butchered ;)
|
Re: Just Joined
I am the one on tuners who pmed you. I was wondering if you actually got a 10 or not and if why not, why the name?
|
Re: Just Joined
Haven't run the 1/4 yet but 10 is what I'm aiming for, If I don't hit 10s on a g-tech (getting one for christmas); I'm getting a bigger turbo :)
|
Re: Just Joined
Welcome, good luck on the 1/4. This site owns everyother dsm site! So be sure to make this your home page. Haha.
|
Re: Just Joined
welcome. good luck hitting that 10
|
Re: Just Joined
I think I'll change my name to 6-secondSteve, if I can hit that on my g-tech.
|
Re: Just Joined
Quote:
You might hit 10s on the GTech, since they are a bit inaccurate, but it is unlucky you will hit 10s without nitrous at a real track. |
Re: Just Joined
No way you're hitting a 10 with that setup.
|
Re: Just Joined
unless your last name is shepard or brown
|
Re: Just Joined
Yeah, dont want to get down too hard on the new guys, but when you're listing your radiator fans and blow off valve in your mod list it's obvious you arent ready to run 10's. I'd be shocked to see 11's.
|
Re: Just Joined
Thanks, assholes.. I come in here and tell you guys what I have and get spit in my face? Well, on every forum I'm on there's always less-inteligent people, I guess I shouldn't be surprised. CVD, listing a BOV isn't important because? It's still a performance part, just like the fans. TalonTSIDude, maybe that's why I said I'm aiming for 10s. 1GKiller, go here... http://www.gtechpro.com/accuracy.html
I have only had this car running for three months and this is my first setup, there's more to come. You think I'm going to try to hit 10s with a TD05H/20g? PS, thanks to those who gave me a warm welcome and didn't judge me before they had a single conversation with me. Thanks to the ones that have no faith in me, also. You have just motivated me more to be faster. |
Re: Just Joined
10s on a 20G isn't impossible, and would be a hell of a feat, but definatly unlikely.
it's all good, people here do tend to push each other but its all in good fun usually. |
Re: Just Joined
Quote:
The members of this board tend to be a bit aggressive when it comes to other people bragging about unproven setups. Its all in good fun. |
Re: Just Joined
Quote:
Yup. Just doin my job. |
Re: Just Joined
Get um boys! Yeah, you really do have to be meek and humble on this site. Some of these fine folks have run 10s, some have run 15s. Point is, that some know what it takes and some know what can't do it. Welcome to the place where 16Gs can run high 15s all day. Welcome to where a full weight 20Ged car ran 11.27. Welcome to where some members have nine guns and seven Rock Falls trophys in their room. Welcome to where some members have never driven a DSM. You get to figure out who is who. In short, welcome!
BTW- you are still a cracker. |
Re: Just Joined
BTW, I'm still only half cracker. ;) Who ran the 11.27 in the full-weight 20g, was it TD05H,TD06 or hybrid?
|
Re: Just Joined
Quote:
|
Re: Just Joined
Less weight? I already have my car stripped except for the dash, this is my race car; I barely drive it on the street. I also just checked dsmtimes.org and found Dave Shultz ran 11.057 on a TD05H/20g.
|
Re: Just Joined
Oh yeah, as for who it is. I'm not telling you so you don't flood his PM box. Just build a decent setup. He did this as a project low-buck type thing. It was a cheap car and all that stuff....
|
Re: Just Joined
cracker! |
Re: Just Joined
I already know it's Andy Nash, he's on dsmtimes.org also. He even has dsmstyle.com listed in there by his time. If he would come out of the woodwork it would be nice, otherwise I won't bother him.
|
Re: Just Joined
Quote:
We don't mean to be assholes about running 10s with a 20G, it just isn't easy and is very rarely done. Especially if you are new to modding DSMs and have never even raced the car yet. Most people run 12s with a 20G, 11s are a realistic goal. 10s have been run before with the 20G but possible only twice and thats out of who knows how many billion DSMs :) that have run a 20G at one time or another, those 2 cars also were not your normal cars and one of them might have been on nitrous also. Goodluck in your quest for 10s and start stockpiling replacement trannies. |
Re: Just Joined
Better get that bigger turbo or one hell of a 60ft. We all know how easy 10s are.
|
Re: Just Joined
haha no shit.
I can lay claim that the car was my chassis before that 11.2x pass. And now it should go 10's this year in its new owners hands. |
Re: Just Joined
Quote:
|
Re: Just Joined
I think that is why Cher said "Better get THAT bigger turbo." Reregister with a new name and start over ;)
|
Re: Just Joined
Guys, lighten up on him. Who cares what the screen name is, at least he has goals.
|
Re: Just Joined
Quote:
|
Re: Just Joined
Quote:
|
| All times are GMT -5. The time now is 02:44 PM. |
Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.