MitsuStyle

MitsuStyle (http://www.mitsustyle.com/forums/index.php)
-   Project Talk (http://www.mitsustyle.com/forums/forumdisplay.php?f=5)
-   -   Pauls bikes (http://www.mitsustyle.com/forums/showthread.php?t=35468)

93gtpeater 01-09-2016 03:27 PM

Pauls bikes
 
3 Attachment(s)
I see some bike threads on here so I figure I will start one.

07 gsxr 1000 that iam putting back to stock and selling it come spring.

03 busa that iam building into a drag bike. Plans for this season are swingarm 12 inch over, 2 inch flat oil pan, and side winder exhaust. I would also like to get the bike lower.

03 turbo busa. Bike has a stage 1 turbo kit boosting 5 pounds. Plans are to get the throttle body seals fixed and fix the oil return line. I might turn up the boost after I fix the 2 things. I should be able to go up to 8 pounds on pump gas. I plan on keeping it a pump gas bike.

02 honda cr 250 2 smoke. Plans for this beast are new tires and strip the bike down and fix anything it needs before I trail ride it this summer. Bike has been to hell and back. Never skipped a beat even after it hydro locked a couple years ago.

C3L1CA 01-09-2016 05:27 PM

Re: Pauls bikes
 
Sooo many bikes! It'd be hard to keep up moding all dem sum bitches.

Should be a good thread!

turbotalon1g 01-10-2016 11:17 AM

Re: Pauls bikes
 
Badass

93gtpeater 01-12-2016 09:31 PM

Re: Pauls bikes
 
1 Attachment(s)
Here's a time slip from last at bir. My best time on the bike running mr12 race gas. This summer I hope to run 9.3x on pump gas with the bike longer and lower.

tehehodi 01-13-2016 12:06 AM

Re: Pauls bikes
 
Quote:

Originally Posted by 93gtpeater (Post 459822)
Here's a time slip from last at bir. My best time on the bike running mr12 race gas. This summer I hope to run 9.3x on pump gas with the bike longer and lower.

Which bike?

93gtpeater 01-13-2016 07:36 AM

Re: Pauls bikes
 
That's one the white busa. I have not taken the turbo bike to the track yet. I might take the turbo bike to the track this spring and see if I can get a 9 out of it. It's stock wheel base, stock gearing, and stock ride height. It loves to wheelie 1st and 2nd gear.

Kracka 01-13-2016 08:45 AM

Re: Pauls bikes
 
I didn't realize white folks actually rode Hyabusas :p

tehehodi 01-22-2016 09:23 AM

Re: Pauls bikes
 
https://scontent.fsnc1-1.fna.fbcdn.n...6oe%3D56FE0DF6

93gtpeater 01-22-2016 11:07 AM

Re: Pauls bikes
 
Hahahaha priceless

Hopefully the gsxr will be sold by spring. Then I will just ride the turbo busa till it sells. Hopefully sell close to fall so I can pick up a cheap cruiser. Gf told me I should buy a cruiser. So that's the plan. Cruiser, drag bike, and some dirt bikes. I don't know if I will buy another street bike. I can always ride the drag on the street and push my lucky with the police.

tehehodi 01-22-2016 11:28 AM

Re: Pauls bikes
 
Quote:

Originally Posted by 93gtpeater (Post 459921)
Hahahaha priceless

Hopefully the gsxr will be sold by spring. Then I will just ride the turbo busa till it sells. Hopefully sell close to fall so I can pick up a cheap cruiser. Gf told me I should buy a cruiser. So that's the plan. Cruiser, drag bike, and some dirt bikes. I don't know if I will buy another street bike. I can always ride the drag on the street and push my lucky with the police.


YESSS!! Come to the old side! Cruiser is my main mode of transportation in the summer now. Plus we can do couples thangs in the summer with brizzle and his wife as well. :drive1:

93gtpeater 01-22-2016 12:14 PM

Re: Pauls bikes
 
Lol sounds like a plan.

turbotalon1g 01-22-2016 01:24 PM

Re: Pauls bikes
 
You guys should start a bike gang

C3L1CA 01-22-2016 01:45 PM

Re: Pauls bikes
 
I thought 'style was a gang?

turbotalon1g 01-23-2016 08:06 PM

Re: Pauls bikes
 
ugh, i never make the cut. :cry:

93gtpeater 01-23-2016 08:40 PM

Re: Pauls bikes
 
2 Attachment(s)
Worked in the garage today and finish exhaust swap on the gsxr. I have somebody that sounds interested in buy the gsxr soon. I worked on the busa a little today too. I bought a chrome moly swingarm that's 12 inches longer then stock. It should be a little lighter then the stock swingarm. Bike weighs 470 pounds right now. I hope after the swingarm and some other stuff I plan on doing I can get the bike down to 450 pounds. I also plan on painting the bike this winter. Iam thinking blue or red right now. Here's what the bike looks like now with stock swingarm with 6 inch extensions and it plastic dipped white.

93gtpeater 01-27-2016 08:46 PM

Re: Pauls bikes
 
3 Attachment(s)
Installed my new swingarm tonight. Pretty happy with how easy it was to install the new arm and how it looks installed. Now I need to figure how long of a chain I need and figure out how to use my rear brake or just ditch the rear brake. Getting close one part at a time.

tehehodi 01-27-2016 11:26 PM

Re: Pauls bikes
 
Your 60-0 times would be a lot better with a rear brake. I say keep it especially if that thing is going that fast in the 1/4.

C3L1CA 01-28-2016 12:42 AM

Re: Pauls bikes
 
That swingarm looks good on there for sure!

Fuck a back brake, I'd have my off if I didn't have to modify the bracket so I can use the speedo sensnsor

93gtpeater 01-28-2016 08:28 AM

Re: Pauls bikes
 
Well I guess I will order a spacer so I can delete the rear brake.

93gtpeater 02-04-2016 09:17 PM

Re: Pauls bikes
 
3 Attachment(s)
So I took all the plasti dip off the bike and started to prep it for paint. So far I have painted the tail section on the bike. Iam very happy on how good the tail section turned out for a rush job. I will take as many pics possible.

One picture is it all primed, 2nd picture is it painted, 3rd is it all wet sanded and buffed

turbotalon1g 02-04-2016 11:36 PM

Re: Pauls bikes
 
man that looks good!

tehehodi 02-05-2016 12:38 AM

Re: Pauls bikes
 
You painting in your garage or after hour special at work? Looks really good regardless.

93gtpeater 02-05-2016 08:25 AM

Re: Pauls bikes
 
Painting in the garage at home. Iam going to paint the tank and the front fairing hopefully this weekend. If they turn out better then the tail I will strip the tail down and redo it.

C3L1CA 02-05-2016 09:56 AM

Re: Pauls bikes
 
Looks pimp!

93gtpeater 02-15-2016 09:28 PM

Re: Pauls bikes
 
Bought some new parts this week. Woot woot. Going to install them this weekend. I got the new sidewinder exhaust bolted up tonight and the radiator reinstalled. Just waiting for a oil pan gasket so I can install the new flat oil pan. I will post pics this weekend.

93gtpeater 03-06-2016 07:45 PM

Re: Pauls bikes
 
2 Attachment(s)
Well this weekend I finished painting the bike. It looks pretty good. I have a couple things left to do before it road ready. Hopefully it will be ready next weekend so I can take it out and work any bugs out.

tehehodi 03-06-2016 08:36 PM

Re: Pauls bikes
 
Looks good! Paint the frame black next year?

93gtpeater 03-06-2016 08:42 PM

Re: Pauls bikes
 
I won't paint it. I would get it powder coated

niterydr 03-09-2016 10:02 AM

Re: Pauls bikes
 
Nice!!

turbotalon1g 03-09-2016 05:47 PM

Re: Pauls bikes
 
Looks slow..... :KANE:

93gtpeater 03-18-2016 10:42 AM

Re: Pauls bikes
 
1 Attachment(s)
So messed around with the bike some more. I used some lowering links off a older gsxr and it lowered the bike a lot. Bike is almost done for now. Ordered a new front fender that sits lower so I can run a smaller front tire and lower the front another inch. Going to get my fork seals replaced and get them internally lowered soon.

93gtpeater 03-29-2016 09:24 AM

Re: Pauls bikes
 
2 Attachment(s)
This weekend I took my forks off to have them internally lowered 2.5 inches. Waiting to get those back this week. I ordered a lowering front fender to go with my new low pro front tire. Couple more weeks and it ready for its first pass.

tehehodi 03-29-2016 09:31 AM

Re: Pauls bikes
 
You going the same day as bee rizzle?

93gtpeater 03-29-2016 10:44 AM

Re: Pauls bikes
 
That's the plan Pat. Just need to button up a couple of things before then.

C3L1CA 03-29-2016 11:31 AM

Re: Pauls bikes
 
Got that floating bike mod! Paint looks really good.

93gtpeater 03-29-2016 12:30 PM

Re: Pauls bikes
 
Lol floating bike. Thanks the paint came out good for a Rattle can job. Can't wait to ride this beast since it's my only bike now.

93gtpeater 04-04-2016 10:34 AM

Re: Pauls bikes
 
4 Attachment(s)
Installed my forks and yea they are a little short. I don't have enough room for a fender to fit so iam not running a front fender. Hahaha. I rode the bike this weekend and it rides good but can't take any corners. The exhaust hits and the kick stand hits. So iam going to raise the rear up to give me more clearance. I also lightened up the front upper fairing stay. Try to cut as much weight as I can on the bike. I want to get it close to the liter bike weight.

93gtpeater 04-06-2016 09:09 PM

Re: Pauls bikes
 
1 Attachment(s)
Sold my k7 gsxr 1k and my turbo busa a couple weeks ago and picked up a new bike tonight. 2006 suzuki c90t. Great cruiser bike for sure. Does 85 mph with ease.

C3L1CA 04-06-2016 11:41 PM

Re: Pauls bikes
 
w00t, we can be old men with Pat and go on cruises to enjoy the scenery while scrapping peg lol

93gtpeater 05-07-2016 04:51 PM

Re: Pauls bikes
 
1 Attachment(s)
Made a trip out to rockfalls this morning. The conditions weren't the best and it was sport compact day. But over all I was pretty happy with how the bike did and my clutch hand. I was fighting traction a couple of times . I did beat my best pass so today. Trap speed was super low.


All times are GMT -5. The time now is 09:42 PM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.