|
1g/2g parts/eagle rods/6 bolt block/misc
Cleaned out part of the garage and found a ton of stuff I no longer need/want. If you feel the price is too high, shoot me an offer!
Prices are picked up either in Oakdale or from my work in St. Paul. Extra will be charged if you want to meet up somewhere out of the way or need an item shipped. Smoked Turn Signals: $30 http://i6.photobucket.com/albums/y20...A/8fb3d765.jpg 2g 5spd shifter assembly: $10 1g oil cap: $5 Evo CAS housing: $5 http://i6.photobucket.com/albums/y20...A/b02eb94d.jpg 2g brake calipers: $60 for both or $40 a piece Great upgrade for the 1g's http://i6.photobucket.com/albums/y20...A/944a9c8c.jpg Half of a frame slider for an '06 R6: FREE if anybody wants it for something useful http://i6.photobucket.com/albums/y20...A/f2b5a707.jpg Misc usermanual/book thingies: FREE if anybody wants them http://i6.photobucket.com/albums/y20...A/03a4cdd3.jpg B&M Fuel Pressure gauge on a stock banjo bolt fitting: $20 http://i6.photobucket.com/albums/y20...A/73afea3b.jpg http://i6.photobucket.com/albums/y20...A/c20c8789.jpg 1g gloss black fuel rail: $10 AEM wideband silver bezel and silver face: $2 http://i6.photobucket.com/albums/y20...A/fe36af3d.jpg 2g stock upper inctercooler pipe: $3 http://i6.photobucket.com/albums/y20...A/61c290ea.jpg 2ga passenger side skirt end cap: $7 http://i6.photobucket.com/albums/y20...A/42a386b3.jpg 2g gray steering wheel airbag: $7 http://i6.photobucket.com/albums/y20...A/34ad5e31.jpg Trailer hitch wiring kit: $10 PUlled off a 2g http://i6.photobucket.com/albums/y20...A/77b7f689.jpg http://i6.photobucket.com/albums/y20...A/ffaeb12a.jpg 2g Overflow tank with cover and sensor: $10 Comes with bracket but it was cut to be moved to where the stock intercooler pipe was. Bracket can just slide off though. http://i6.photobucket.com/albums/y20...A/16b52eaf.jpg Air filter: $2 pending to goodhart K&N air filter with custom plastic shield to bolt up to a 2g maf http://i6.photobucket.com/albums/y20...A/976326c8.jpg Gaskets: $10 for all of them or $4 a piece - maybe pending to goodhart http://i6.photobucket.com/albums/y20...A/ab4285bf.jpg NOS solenoid: $20 http://i6.photobucket.com/albums/y20...A/db75c31d.jpg Alpine CD Changer: $50 http://i6.photobucket.com/albums/y20...A/3262e320.jpg 2g air bag ecu: $10 http://i6.photobucket.com/albums/y20...A/aa130c77.jpg Misc couplers: Make an offer Random battery tie down brackets: Make an offer http://i6.photobucket.com/albums/y20...A/5312fd8f.jpg 2g stock intercooler piping/coupler: $15 http://i6.photobucket.com/albums/y20...A/3651dc8d.jpg Jumptronix volt gauge: $15 Think it can measure o2 voltage too if the switch gets flipped in the back http://i6.photobucket.com/albums/y20...A/45d66c04.jpg http://i6.photobucket.com/albums/y20...A/554a7b4a.jpg Evo upper intercooler coupler and random evo bracket: Make an offer http://i6.photobucket.com/albums/y20...A/bfa11b34.jpg Evo 02 housing: Make an offer http://i6.photobucket.com/albums/y20...A/2a755b65.jpg Evo stock lower intercooler pipe with couplers: Make an offer http://i6.photobucket.com/albums/y20...A/420ef09e.jpg King bearings: Make an offer http://i6.photobucket.com/albums/y20...A/77730b61.jpg http://i6.photobucket.com/albums/y20...A/b9832d52.jpg http://i6.photobucket.com/albums/y20...A/14314805.jpg 1g manul cams: $10 I'm keeping the cam gears http://i6.photobucket.com/albums/y20...A/02394059.jpg Tsuanami inline fuse holder: $5 http://i6.photobucket.com/albums/y20...A/dc84d4e7.jpg 6 bolt rods/pistons: Make an offer - pending to goodhart 1 piston has a melted ring land http://i6.photobucket.com/albums/y20...A/6cfbe325.jpg Speakers: make offer http://i6.photobucket.com/albums/y20...654FB155ED.jpg http://i6.photobucket.com/albums/y20...655A748BD0.jpg http://i6.photobucket.com/albums/y20...656053FE52.jpg http://i6.photobucket.com/albums/y20...6554A5589E.jpg :woohoo1: |
Re: 1g/2g parts/eagle rods/6 bolt block/misc
I'll take that heatshield, info on that sub box. weight & dimensions please.
|
Re: 1g/2g parts/eagle rods/6 bolt block/misc
The sub box is pretty heavy for its size, I'd guess maybe 20-30 lbs but I'll get its exact weight and some measurements tonight
|
Re: 1g/2g parts/eagle rods/6 bolt block/misc
Cool, i'll be in the woodbury area this weekend I work 10-8 at summit
|
Re: 1g/2g parts/eagle rods/6 bolt block/misc
Sounds good. If you wanted to stop by before work that would be perfect or after you're done might work too.
You still have my number? |
Re: 1g/2g parts/eagle rods/6 bolt block/misc
yeah. I'll hit you up. probably after tomorrow morning is gonna suck for me
|
Re: 1g/2g parts/eagle rods/6 bolt block/misc
Sounds good. I might actually ride out to C&C if I can get out of bed at a decent hour haha
|
Re: 1g/2g parts/eagle rods/6 bolt block/misc
Boost controller still working good?
|
Re: 1g/2g parts/eagle rods/6 bolt block/misc
It should be, I receieved it when I bought my current 2g. The owner said he switched to a Hallman because it looked prettier haha. If it doesn't work correctly I will refund you the cash :nod:
You're Richard's nephew? |
Re: 1g/2g parts/eagle rods/6 bolt block/misc
Haha ok sounds good I'll be in oakdale later tonight you gonna be available? And yup I am!
|
Re: 1g/2g parts/eagle rods/6 bolt block/misc
I might be, not 100% though. Text me at 651.343.1zero.5.two when you're thinking of heading out and I'll see if I'll be back.
Aaron, sub and box weigh in at 30lbs and the box is 13.5x14.5x10 |
Re: 1g/2g parts/eagle rods/6 bolt block/misc
Ok cool Im going to be fishing at lake Elmo so I'll be back around 10ish I'll shoot you a text
|
Re: 1g/2g parts/eagle rods/6 bolt block/misc
Quote:
I'm working till 8pm at summit woodlake off lake dr and 494 if you get the itch to head that way, hit me up. If not I'll try to remember to get a hold of you, I'm there sat. & sun. |
Re: 1g/2g parts/eagle rods/6 bolt block/misc
Hey you want your sweet sidemarkers from the auto? I also have all your nitrous wiring for ya. I'll hit ya up and head that way soon. I don't need anything for the markers just know you said you wish you would have switched them.
|
Re: 1g/2g parts/eagle rods/6 bolt block/misc
List updated.
Quote:
Shit yea! Just hit me up when you're cloase and we can meet up er something :bengals: |
Re: 1g/2g parts/eagle rods/6 bolt block/misc
Block is sold along with ARP mains I forgot I had DB order haha
|
Re: 1g/2g parts/eagle rods/6 bolt block/misc
Sounds good. I'll hit ya up when I'm in the area. Oh and I need the stock airbox and filter. Also did you ever come across the rear belts for the auto.
I'll probably rip done sometime this weekend |
Re: 1g/2g parts/eagle rods/6 bolt block/misc
Is the alpine deck a direct fit into the 2g? As in harness, bracket, etc? Let me know dude!
|
Re: 1g/2g parts/eagle rods/6 bolt block/misc
Bump need fuse holder 1g deck spk wires
|
Re: 1g/2g parts/eagle rods/6 bolt block/misc
I'm in desperate need of a 3 inch to 3 and 3/8ths inch coupler immediately!
Let me know if you have one. Derek 320 304 zero 9 eight 6 |
Re: 1g/2g parts/eagle rods/6 bolt block/misc
List updated.
Somebody buy these rods locally before I put them on tuners! |
Re: 1g/2g parts/eagle rods/6 bolt block/misc
I might be interested in that sub. Any idea if it's a DVC, 2 or 4 ohm?
|
Re: 1g/2g parts/eagle rods/6 bolt block/misc
I'm not sure to be honest with you. It came in my last car I purchased and I'm pretty much useless when it comes to stero knowledge :(
|
Re: 1g/2g parts/eagle rods/6 bolt block/misc
Any chance of meeting up sometime this week?
|
Re: 1g/2g parts/eagle rods/6 bolt block/misc
Tomorrow? I could bring it with me to work tomorrow as I'll drive my car as it looks like rain. Otherwise eary afternoon on Thursday/Friday could probably work as well.
|
Re: 1g/2g parts/eagle rods/6 bolt block/misc
Alpine model number
|
Re: 1g/2g parts/eagle rods/6 bolt block/misc
I could run out around lunchtime tomorrow, any chance of meeting a little closer than downtown SP? :D
|
Re: 1g/2g parts/eagle rods/6 bolt block/misc
Crap I forgot to get the model number off the Alpine deck last night :( I'll get it tonight though!
I'll shoot you a PM Steve! |
Re: 1g/2g parts/eagle rods/6 bolt block/misc
Removed sold stuff and added some amps and the JMF intake manifold :)
|
Re: 1g/2g parts/eagle rods/6 bolt block/misc
I could use that inline fuel holder. Do you have the specs or part numbers of the amps?
|
Re: 1g/2g parts/eagle rods/6 bolt block/misc
I'll try and get some pics/info on the amps up tomorrow. Sorry for the lack of info on the stereo stuff.
|
Re: 1g/2g parts/eagle rods/6 bolt block/misc
Updated
|
Re: 1g/2g parts/eagle rods/6 bolt block/misc
Ill take the calipers!
|
Re: 1g/2g parts/eagle rods/6 bolt block/misc
Sweet!
I'm thinking I should be around most of the weekend otherwise I can always meet you in Muderapolis on a Weds if that's closer/works better. |
Re: 1g/2g parts/eagle rods/6 bolt block/misc
Sold a lot of the big stuff bump
|
Re: 1g/2g parts/eagle rods/6 bolt block/misc
You still have those calipers?
|
Re: 1g/2g parts/eagle rods/6 bolt block/misc
Yes sir. Sending you a PM
|
Re: 1g/2g parts/eagle rods/6 bolt block/misc
I'll take the rods for a good price. :) What did you have for a setup on your freak motor? 1g rods, 2g ebay pistons?
|
| All times are GMT -5. The time now is 07:39 AM. |
Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.