MitsuStyle

MitsuStyle (http://www.mitsustyle.com/forums/index.php)
-   Mitsu vehicles for sale (http://www.mitsustyle.com/forums/forumdisplay.php?f=77)
-   -   95 GSX shell converted to Talon (http://www.mitsustyle.com/forums/showthread.php?t=31442)

blackawdtsi 04-21-2012 12:48 PM

95 GSX shell converted to Talon
 
*** DOWN PAYMENT MADE - SOLD ***

A lot of you have probably seen my 2g project thread. The motor ate itself right before winter and I've been slowly parting it out since. Still left on the shell is:

Vented Rotors
SS Brake Lines
GC Coil Overs with Koni Yellow Adjustables
2G 5 Spokes
KB Boost A Pump
DW 300 Fuel Pump
Aeromotive FPR
Power Steering
Driveline (transfer case, axles, driveshaft, rear end)
Thermal 3" Exhaust
Radiator
Full Interior

Will also come with some parts if bought at asking price:

2G trans. Does fine at normal RPMS but eats it at 7500+ (read: normal, used)

EVO 1 Trans, didn't get it in before motor went, was told it runs great

6 bolt block that needs to be rebuilt, has Wiseco pistons and Eagle H Beams that need to be reconditioned

6 bolt head with FP Beehives

Tial 38mm Wastegate

2 spare 6 bolt cranks

Odyssey PC680


There's probably more I'm forgetting but if you're serious, come check it out. Asking $2k for everything.

http://i269.photobucket.com/albums/j...g/L1020124.jpg

http://i269.photobucket.com/albums/j...g/L1020125.jpg

http://i269.photobucket.com/albums/j...g/L1020126.jpg

C3L1CA 04-21-2012 11:30 PM

Re: 95 GSX shell converted to Talon
 
That's a really good deal.

What's wrong with the pistons? Willing to separate?

TjXiong 04-22-2012 12:00 AM

Re: 95 GSX shell converted to Talon
 
Part out that intercooler?

blackawdtsi 04-22-2012 03:01 AM

Re: 95 GSX shell converted to Talon
 
Quote:

Originally Posted by C3L1CA (Post 404819)
That's a really good deal.

What's wrong with the pistons? Willing to separate?

Nothing's wrong with them. Just the rods need to be reconditioned. I have someone coming too look at everything tomorrow. I'm trying to just give someone a ton of parts on top of the shell, but we will see.

Quote:

Originally Posted by TjXiong (Post 404821)
Part out that intercooler?

The IC was listed on here a few weeks ago. Someone on Link bought it.

C3L1CA 04-22-2012 11:34 AM

Re: 95 GSX shell converted to Talon
 
Well good luck! Hit me up if you're willing to part with them

GsXtUrBo98 04-22-2012 11:35 AM

Re: 95 GSX shell converted to Talon
 
This is too bad tom i'm sorry to hear about this

blackawdtsi 04-22-2012 07:46 PM

Re: 95 GSX shell converted to Talon
 
Thanks Brad.

Chris, it's unfortunate the car didn't go as planned. But I'm going to buy another bike so I'm not out completely. :smile:

blackawdtsi 04-22-2012 08:34 PM

Re: 95 GSX shell converted to Talon
 
*** DOWN PAYMENT MADE - SOLD ***

goodhart 04-22-2012 10:05 PM

Re: 95 GSX shell converted to Talon
 
Note to the buyer: This is a Talon, not a converted Eclipse.

CornFed2.4 04-22-2012 10:49 PM

Re: 95 GSX shell converted to Talon
 
Quote:

Originally Posted by goodhart (Post 404861)
Note to the buyer: This is a Talon, not a converted Eclipse.

Thanks

Jungy 04-24-2012 12:00 PM

Re: 95 GSX shell converted to Talon
 
This is my old car. Link to the original build thread: http://www.mitsustyle.com/forums/showthread.php?t=27354

Swanny 04-24-2012 11:59 PM

Re: 95 GSX shell converted to Talon
 
Quote:

Originally Posted by CornFed2.4 (Post 404871)
Thanks

Wow nice buy, how much?

CornFed2.4 05-01-2012 03:51 AM

Re: 95 GSX shell converted to Talon
 
So I picked this up today and all I can say is WOW! Tom gave me a ton of stuff not to mention one of most rust free shells I have ever seen!

Thanks again.

I now found the shell for my 2.4 build

goodhart 05-01-2012 07:02 AM

Re: 95 GSX shell converted to Talon
 
Glad it went to a good home.

turbotalon1g 05-01-2012 11:08 AM

Re: 95 GSX shell converted to Talon
 
Saw the car last night, great deal.

Jungy 05-01-2012 12:26 PM

Re: 95 GSX shell converted to Talon
 
I'm glad to see that its going to a good home and not getting parted out and junked after all the work I put into building it. The shell is originally a TX car so that helped out a lot!

goodhart 05-01-2012 02:24 PM

Re: 95 GSX shell converted to Talon
 
Or "upgraded"when its a basically finished car, just to run 13's :lol:

CornFed2.4 05-01-2012 02:58 PM

Re: 95 GSX shell converted to Talon
 
Thanks guys project thread will be starting soon

blackawdtsi 05-01-2012 03:15 PM

Re: 95 GSX shell converted to Talon
 
Quote:

Originally Posted by goodhart (Post 405460)
Or "upgraded"when its a basically finished car, just to run 13's :lol:

Are you talking about the finished car with a blown turbo? :jackoff:

goodhart 05-01-2012 03:20 PM

Re: 95 GSX shell converted to Talon
 
Ran fine when you brought it to full blown or whatever it was. Then you started changing everything that didn't need to be changed and started blaming broken shit on the previous owner.

turbotalon1g 05-01-2012 05:33 PM

Re: 95 GSX shell converted to Talon
 
Quote:

Originally Posted by Jungy (Post 405449)
I'm glad to see that its going to a good home and not getting parted out and junked after all the work I put into building it. The shell is originally a TX car so that helped out a lot!

That explains why it was so clean, Nick was ecstatic about how clean it was.

Quote:

Originally Posted by goodhart (Post 405465)
Ran fine when you brought it to full blown or whatever it was. Then you started changing everything that didn't need to be changed and started blaming broken shit on the previous owner.

I wouldn't say that, there was a lot of junky shit on that car before tom put his hands on it. Most stupid/junky was that brass T used on the OFH.

Sorry guys, and I'm not even tom's biggest fan since he is a douche.

blackawdtsi 05-01-2012 07:23 PM

Re: 95 GSX shell converted to Talon
 
Quote:

Originally Posted by goodhart (Post 405465)
Ran fine when you brought it to full blown or whatever it was. Then you started changing everything that didn't need to be changed and started blaming broken shit on the previous owner.

:lol: This just shows how ignorant you are. I bet you didn't even work on it before I had it.

CornFed2.4 05-01-2012 07:49 PM

Re: 95 GSX shell converted to Talon
 
Fuck yeah for Texas!

Goodhart who cares what Tom did with the car, people either love or hate holsets. So really who cares.

Tom was a super stand up dude the entire time honest about what he had and everything. Could not of asked for a easier transaction.

For the comment about "upgrading" and running a 13. If you make any kind of power these trans suck to shift expecially if it's still stock never been rebuild.

I think I ran a 13.2@118 on a 3561 so if you think it's easy it's not.

turbotalon1g 05-01-2012 08:21 PM

Re: 95 GSX shell converted to Talon
 
I'll drive it! :shift:

CornFed2.4 05-01-2012 08:37 PM

Re: 95 GSX shell converted to Talon
 
Quote:

Originally Posted by turbotalon1g (Post 405491)
I'll drive it! :shift:

If you remember how to shift :lol: I keed I keed

turbotalon1g 05-01-2012 08:41 PM

Re: 95 GSX shell converted to Talon
 
Quote:

Originally Posted by CornFed2.4 (Post 405493)
If you remember how to shift :lol: I keed I keed

:lol:

U forget I haz honduh powa!!!!! :drive1:

1999Gst 05-01-2012 10:57 PM

Re: 95 GSX shell converted to Talon
 
Get this thing running Nick, I can bring the parts to DB this saterday I'll be there around 2 or 3.

CornFed2.4 05-01-2012 11:41 PM

Re: 95 GSX shell converted to Talon
 
sounds good I should be there most of the day.

1999Gst 05-02-2012 03:29 AM

Re: 95 GSX shell converted to Talon
 
Text me a list saterday or before of what you all need


All times are GMT -5. The time now is 11:52 PM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.